Guide · ISO 45001 consulting
How to choose an ISO 45001 consultant, from the safety buyer's side.
The right ISO 45001 consultant knows which safety regulator governs each of your sites, builds the hazard list with the people who do the work, and leaves you owning the system. Here is what to test before you hire one, the questions to ask, the red flags, and a scorecard for the first call.
Last verified October 26, 2026 · Not legal advice
- The first test
- Can they name your regulator, site by site? Federal OSHA, a State Plan, a province, or the Canada Labour Code.
- What ISO 45001 is
- A voluntary management tool. The law applies either way, and takes precedence.
- Who certifies you
- An accredited certification body, which may not consult on management systems.
- Edition today
- ISO 45001:2018. The revision is at draft stage; ISO expects it in the first half of 2027.
1. Do they know the regulator that actually applies?
ISO 45001 says nothing about OSHA; your legal register does. In the US, ask for each site: federal OSHA or a State Plan? OSHA lists 29 State Plans. Some cover private employers; others cover only state and local government workers, and in those states private employers fall under federal OSHA. OSHA counts 22 of the first kind and seven of the second: Connecticut, Illinois, Maine, Massachusetts, New Jersey, New York and the U.S. Virgin Islands. Every State Plan must be at least as effective as federal OSHA, and some ask for more. California, for example, requires every employer to establish, implement and maintain a written Injury and Illness Prevention Program under Title 8, section 3203. A consultant who knows that builds ISO 45001 around the program you already must have, not beside it.
In Canada, Part II of the Canada Labour Code applies only to workplaces under federal jurisdiction, such as airlines, banks, interprovincial trucking and rail, pipelines and telecommunications. Elsewhere the province sets the rules, and the provinces treat ISO 45001 differently (our Canada guide has the detail):
- Ontario. ISO 45001:2018 and CSA Z45001-19 are two of the five accredited standards in Supporting Ontario's Safe Employers (as of October 2025). Recognition needs a third-party audit, compliance with the Occupational Health and Safety Act, and a commitment to worker participation. Recognized Schedule 1 employers that meet the WSIB's conditions can receive rebates of up to $300,000, $200,000 and $100,000 over three years.
- Alberta. A valid ISO 45001:2018, CSA Z45001:19 or CSA Z1000:14 certification from a designated certification body can be used to obtain a regular three-year Certificate of Recognition (COR) through a Certifying Partner, if the audit scope aligns with your operations. The province does not define "designated certification body," so ask your Certifying Partner before you sign an audit contract.
- British Columbia. The OHS Regulation requires a formal program from employers with 20 or more workers and a moderate- or high-hazard workplace, and from every employer with 50 or more. It does not name ISO 45001, and a certificate does not discharge the duty. The pages for WorkSafeBC's voluntary COR program do not mention ISO 45001 either.
A consultant working in Canada should also tell you whether CSA Z45001, which adopts ISO 45001:2018 with Canadian deviations, is the better target.
2. Will workers really take part?
Consultation and participation of workers (clause 5.4) is a requirement of ISO 45001, and ISO's technical committee ties it to the leadership requirements: you cannot meet one without the other. OSHA's Recommended Practices for Safety and Health Programs add the regulator's view: workers are often best positioned to spot hazards, and participation fails when people fear retaliation, face language barriers or lack time.
Ask how the consultant will reach every shift, contractors, and people who work in another language, and what workers will see change after they speak up. A signature on the policy is not participation.
3. Is hazard identification built from the floor?
Hazard identification (clause 6.1.2) is where a template shows first. OSHA recommends inspecting with workers, asking which activities, equipment and materials concern them, and asking again before operations change. The consultant you want plans time with operators, maintenance and supervisors, covers non-routine work such as changeovers, cleaning and repairs, and treats contractors and purchased work as part of the picture (clause 8.1.4). If a hazard register arrives before anyone has talked to your people, it describes somebody else's operation.
4. Is the legal register built from your operation?
ISO 45001 has you determine your legal requirements (clause 6.1.3) and evaluate compliance with them (clause 9.1.2). The register should start from what you do: processes, chemicals, equipment, sites and headcount. Many US employers with more than 10 employees must keep OSHA injury and illness records on Forms 300, 300A and 301, unless their industry is partially exempt, and some must submit the data electronically each year. In British Columbia, section 3.3 of the Regulation lists what the program must contain, from regular inspections to prompt incident investigation.
ISO calls ISO 45001 a management tool for voluntary use, and its technical committee says legislation always takes precedence. A certificate does not, by itself, show that you meet the law. Ask to see a redacted register: each line should name the rule, where it applies, who owns it, and how compliance is checked.
5. Will it integrate with ISO 9001 and ISO 14001?
ISO 45001 follows the same harmonized structure as ISO's other management system standards, including ISO 9001:2026 (published September 16, 2026) and ISO 14001:2026 (published April 15, 2026). ISO says that makes it easier to run several systems as one, with risk management, internal audits and leadership reviews coordinated. If you already hold ISO 9001 or ISO 14001, expect one document control, one internal audit program and one management review, not three binders.
6. Do they know where the revision stands?
ISO 45001:2018, with its 2024 climate action amendment, is the current edition. ISO marked it for revision on May 31, 2024. The draft (ISO/DIS 45001) closed its ballot on September 9, 2026, and ISO expects it to replace the 2018 edition in the first half of 2027. Global ACI sets a transition deadline on or after publication, so there is no date to plan against yet, and an ISO 45001:2018 certificate remains valid. A consultant should build to the 2018 edition, track the draft, and explain what will change. Our revision tracker follows it.
7. Is the certification body kept independent?
Accredited certification bodies work to ISO/IEC 17021-1, which separates consulting from certifying:
- No consultancy. A certification body may not offer or provide management system consultancy (clause 5.2.5). The bar reaches the certification body's own legal entity and the entities it controls, and European Accreditation applies it to ISO 45001 consulting even when the body is not accredited for ISO 45001.
- A two-year gap. If the consultancy came from a body with a relationship to the certification body, that system may not be certified until at least two years after the consultancy ends (clause 5.2.7).
- No bundling. A certification body cannot sell its audits as a package with a consultant's services (clause 5.2.9) or hand its audits to a consulting firm to run (clause 5.2.8).
ISO/IEC TS 17021-10 sets competence requirements for OH&S auditors and certification decision-makers. You choose and contract the certification body, and you can check its accreditation yourself.
8. Can you check their credentials?
Ask for names and certificate numbers, then look them up in the issuing body's own register:
- CQI|IRCA publishes a searchable auditor register, by scheme, grade, name or certification number. For a safety consultant, filter by the OHSMS scheme.
- Exemplar Global offers an ISO 45001 Auditor certification and a "Find a Certified Professional" directory. Its separate training-certificate check confirms a course, not a certification.
- BCSP runs a credential holder directory for the Certified Safety Professional (CSP) and its other credentials.
- BCRSP, Canada's certification body for OHS professionals, has a tool that confirms whether someone holds the CRSP or CRST in good standing.
The scorecard
Score each row 0 (red flag), 1 (partial) or 2 (strong) after the first call. Anything below 2 on regulator fit or impartiality rules a consultant out, whatever the total.
| Test | A strong answer | Red flag | Score |
|---|---|---|---|
| Regulator fit | Names the regulator for each site (federal OSHA, a State Plan, a province or the Canada Labour Code) and the rules that follow. | "ISO 45001 covers OSHA." | 0 · 1 · 2 |
| Worker participation | Reaches every shift, in the languages workers use, with a safe way to raise concerns and visible follow-up. | A signature sheet on the policy. | 0 · 1 · 2 |
| Hazard identification | Built with operators, maintenance and supervisors, including non-routine work and contractors. | A hazard register that arrives already filled in. | 0 · 1 · 2 |
| Legal register | Each line names the rule, where it applies, who owns it and how compliance is checked. | A list of regulation numbers copied from another company. | 0 · 1 · 2 |
| Integration | One document control, one internal audit program and one management review across ISO 9001, 14001 and 45001. | A separate manual for each standard. | 0 · 1 · 2 |
| Edition | Builds to ISO 45001:2018 and tracks the draft revision. | Offers a certificate to the new edition today. | 0 · 1 · 2 |
| Impartiality | You choose and contract the certification body. The consultant has no commercial link to it. | Certificate "included" or a "partner" certification body. | 0 · 1 · 2 |
| Credentials | Names and certificate numbers you can look up yourself. | A training course certificate presented as a certification. | 0 · 1 · 2 |
| Ownership | Your files, your formats, your people trained to run it. | Documents you cannot edit or keep. | 0 · 1 · 2 |
Questions to ask on the first call
- Who will do the work, and what are their certificate numbers?
- For each of our sites, who is the regulator, and which rules will drive our legal register?
- How will you involve the workers who never sit in meetings: night shift, contractors, people who work in another language?
- Who will you talk to during hazard identification, and what happens to what they tell you?
- How will this fit the ISO 9001 or ISO 14001 system we already run?
- What happens to our system when the new edition of ISO 45001 is published?
- Who chooses the certification body, and do you have any commercial relationship with one?
- What will we own at the end, and what will our people be able to run without you?
Red flags
- A certificate guaranteed, bundled or arranged through a "partner" certification body.
- Registers delivered before anyone has spoken to your workers.
- "ISO 45001 makes you OSHA compliant." It does not.
- A certificate to the new edition, offered before it is published.
- Credentials you cannot look up.
- A plan that skips the internal audit or management review before the certification audit.
How a sound engagement is structured
- A fixed-price gap analysis first. It maps the regulator and rules for each site, compares how you work with the standard and the law, and ends with a prioritized plan. A standalone gap analysis is typically in the low five figures.
- Build with your people. Hazard identification, the legal register, controls and the consultation process, designed around how you operate.
- Run it and produce records. At Stage 1, the auditor checks that your internal audits and management reviews are scheduled and under way; at Stage 2, the auditor looks for evidence that the system is in place and working. Both need records only time produces.
- Certification audits, then upkeep. Close any findings, and keep the register and hazard assessments current.
Put in the contract: the named person doing the work, deliverables you can edit and keep, decision rights that stay with you (scope and the certification body), and a clear end point.
What you must own
- Leadership. Top management leads the system and the management review. A consultant can prepare the inputs, not sit in for you.
- Worker participation. The consultant can design it. Your supervisors and workers run it.
- Legal compliance. Your duties under OSHA, a State Plan or provincial law stay with you as the employer. You keep the register current.
- Resources. The money, people and time to act on what the hazard assessment finds.
- The certification body and program applications. You choose and contract the certification body, and you apply for SOSE recognition or COR equivalency.
We build ISO 45001 systems with the people who do the work, tied to the regulator that governs each site and integrated with ISO 9001 and ISO 14001 where you run them, for companies across the US and Canada, on site and remotely. See how on our ISO 45001 page, or start with a gap analysis.
Common questions
What does an ISO 45001 consultant do?
Helps you build and run a health and safety management system that meets ISO 45001, and prepares you for certification: scope, a gap analysis against the standard and the law at each site, hazard identification with workers, a legal register, controls, training, and your first internal audit and management review. An accredited certification body, not the consultant, certifies you.
How do I choose an ISO 45001 consultant?
Test what a safety buyer depends on: knowledge of each site's regulator, real worker participation, hazard identification and a legal register built from your operation, integration, the revision, independence from your certification body, checkable credentials, and what you will own. Score each. A weak answer on regulator fit or impartiality rules a consultant out.
Can our certification body also be our ISO 45001 consultant?
No. ISO/IEC 17021-1, the standard accredited certification bodies work to, bars them from offering or providing management system consultancy, and The bar reaches the certification body's own legal entity and the entities it controls, and European Accreditation applies it to ISO 45001 consulting even when the body is not accredited for ISO 45001. Nor may it sell certification as a package with a consultant's services.
What qualifications should an ISO 45001 consultant have?
An ISO 45001 auditor certification you can check, such as one from CQI|IRCA or Exemplar Global, and a safety credential where it fits: the CSP from BCSP in the US or the CRSP from BCRSP in Canada. Add experience with your regulator and your kind of operation. Check each credential in the issuing body's register; a course certificate shows training, not certification.
Does ISO 45001 certification mean we comply with OSHA?
No. ISO describes ISO 45001 as a management tool for voluntary use, and its technical committee says legislation always takes precedence. Your duties under OSHA, a State Plan or provincial law stand on their own. The standard does make you identify legal requirements and evaluate compliance, so a well-built system shows you the gaps first.
Should we wait for the new edition of ISO 45001?
Usually not. ISO 45001:2018 is current. The draft revision closed its ballot on September 9, 2026, and ISO expects it to replace the 2018 edition in the first half of 2027. Global ACI sets the transition deadline on or after publication. A system built to 2018 with the draft in view moves across as an update.
Does ISO 45001 count for COR in Canada?
In Alberta, yes: a valid ISO 45001:2018 certification from a designated certification body can be used to obtain a regular three-year COR through a Certifying Partner, if the audit scope aligns with your operations. In Ontario, look at Supporting Ontario's Safe Employers, which accredits ISO 45001:2018. WorkSafeBC's COR pages do not mention ISO 45001.
Related
- What an ISO consultant does — how fees work and when certification is worth it.
- ISO certification in Canada — SOSE, Alberta COR equivalency and WorkSafeBC in depth.
- ISO standards revision tracker — where the ISO 45001 revision stands.
- ISO audit days calculator — ISO 45001 audit days by headcount and risk level.
Sources
- ISO, ISO 45001:2018 and ISO/DIS 45001 — 90.92 since May 31, 2024; DIS at 40.60, September 9, 2026; expected to replace the 2018 edition in the first half of 2027.
- ISO/IEC 17021-1:2015, Section 5 (IAS training summary) — clauses 5.2.5, 5.2.7, 5.2.8 and 5.2.9 on consultancy.
- European Accreditation, FAQ 38.18 — the consultancy bar covers the same legal entity and entities under its organizational control.
- HKAS, HKCAS 007 Annex II(A), June 13, 2024 — clause 5.2.7: consultancy from a body related to the certification body.
- ISO/IEC 17021-1:2015, Section 9 (IAS training summary) — Stage 1 item (g) on internal audits and management reviews; purpose of Stage 2.
- ISO, New technical specification for auditors of ISO 45001 and SCC, ISO/IEC TS 17021-10:2018 — competence requirements for OH&S auditing and certification.
- ISO, ISO 45001 briefing note and ISO/TC 283, ISO 45001 questions and answers — voluntary tool; legislation takes precedence; worker participation and leadership.
- BS ISO 45002:2023 preview — clause titles 5.4, 6.1.2, 6.1.3, 8.1.4 and 9.1.2.
- ISO, ISO 14001:2026: what's changed — harmonized structure and integrated management systems.
- OSHA, State Plans — 29 plans (22 covering private and public workers, seven covering public employees only); private employers in public-employee-only states are covered by federal OSHA. Lists by state in the State Plans FAQ.
- OSHA, Recommended Practices for Safety and Health Programs (OSHA 3885, October 2016) and Worker Participation.
- OSHA, Injury and Illness Recordkeeping — Forms 300, 300A and 301; partially exempt industries; electronic submission.
- California Code of Regulations, Title 8, section 3203 — Injury and Illness Prevention Program.
- Government of Canada, OHS in federally regulated workplaces and overview of the Canada Labour Code — federally regulated industries.
- Ontario, Supporting Ontario's Safe Employers program (updated May 12, 2026) and WSIB, Ontario Safe Employers rebate program.
- Alberta, Apply for COR equivalency — qualifying standards, Certifying Partner, three-year COR.
- WorkSafeBC, OHS Regulation Part 3 and Certificate of Recognition.
- CSA Group, CSA Z45001:19 (R2023) — adopts ISO 45001:2018 with Canadian deviations.
- CQI|IRCA, Find an auditor; Exemplar Global, health and safety certifications; BCSP, verifying credentials; BCRSP, FAQs.
If any of this has moved since we last checked, tell us and we will check it and update the page.
Changelog
- 2026-10-26 — Published. Impartiality rules from ISO/IEC 17021-1:2015 and European Accreditation's FAQ; ISO 45001 revision status from ISO; US rules from OSHA and California's Title 8; Canadian rules from the Canada Labour Code overview, Ontario, WSIB, Alberta, WorkSafeBC and CSA Group; credential registers from CQI|IRCA, Exemplar Global, BCSP and BCRSP. All checked October 26, 2026.