Skip to content

Reference · Canada

ISO certification in Canada: the rules and programs that matter (2026).

ISO certification in Canada runs through several separate systems: an accreditation body, a set of National Standards of Canada, a medical device regulator that accepts one kind of certificate, provincial safety programs that treat ISO 45001 in three different ways, and a new federal cyber program that is not ISO at all. Here is each one, what it says about ISO, and where to read more.

Last verified November 9, 2026 · Not legal advice

The rules and programs at a glance

Federal rules and the programs in Ontario, Alberta and British Columbia. Each row links to its section below.

Rule or program Who runs it Where ISO fits Applies in
Accreditation of certification bodies Standards Council of Canada (SCC) Accredits certification bodies for ISO 9001, ISO 14001, ISO 45001, ISO/IEC 27001, ISO 13485 and other standards. A member of Global ACI, the body that replaced IAF and ILAC on January 1, 2026. Canada-wide
National Standards of Canada CSA Group CAN/CSA-ISO 9001 and CAN/CSA-ISO 14001 adopt the 2015 editions without modification. CSA Z45001 adopts ISO 45001:2018 with Canadian deviations. Canada-wide
Medical device licensing Health Canada Class II, III and IV licenses need a quality management system certificate to CAN/CSA-ISO 13485. Since January 1, 2019, only MDSAP certificates are accepted. Canada-wide
Supporting Ontario's Safe Employers (SOSE) Ontario's Chief Prevention Officer; rebates from the WSIB ISO 45001:2018 and CSA Z45001-19 are two of five accredited standards. Recognized Schedule 1 employers that meet the WSIB's conditions can receive rebates of up to $300,000, $200,000 and $100,000 in years one, two and three. Ontario
Certificate of Recognition (COR) and COR equivalency Government of Alberta (Partnerships in Injury Reduction); discounts from WCB-Alberta A valid ISO 45001:2018, CSA Z45001:19 or CSA Z1000:14 certification can be used to obtain a regular three-year COR, an option in place since the 2019-20 fiscal year. Alberta
OHS program duty and COR WorkSafeBC The Regulation requires a formal OHS program past set thresholds. It does not name ISO 45001, and a certificate does not discharge it. COR is a separate, voluntary program. British Columbia
Canadian Program for Cyber Security Certification (CPCSC) Public Services and Procurement Canada, with National Defence An ISO/IEC 27001 certificate is not a CPCSC level. Level 1 opened in April 2026; Level 2 is planned for select contracts from spring 2027. Federal defense contracts
Laboratory accreditation SCC; CALA for testing Laboratories are accredited to ISO/IEC 17025, not certified. Medical laboratories use ISO 15189. Canada-wide

Standards Council of Canada: accreditation and Global ACI

The Standards Council of Canada (SCC) is a federal Crown corporation, established by an Act of Parliament in 1970, and Canada's member of ISO. It is also the country's national accreditation body. For management systems, SCC describes itself as the only internationally recognized accreditation body in Canada. Its management systems program, based on ISO/IEC 17021-1, covers quality (ISO 9001), environmental (ISO 14001), occupational health and safety (ISO 45001), information security (ISO/IEC 27001) and medical device (ISO 13485) management systems, among others.

SCC states that it is a signatory to the international recognition arrangement for most of its management systems sub-programs, and that certification by SCC-accredited certification bodies in those sub-programs is widely accepted internationally. Since January 1, 2026, that arrangement has run under Global Accreditation Cooperation Incorporated (Global ACI), with a single arrangement replacing the separate IAF and ILAC ones. SCC announced in January 2026 that it had joined Global ACI and that existing accreditations remain recognized during the transition. Its bulletin of June 18, 2026, tells accredited bodies that no action is required and that current accreditation marks stay in use until the Global ACI mark is available. Our Global ACI explainer covers the rest.

For most buyers, the certificate to hold is one from a certification body accredited by SCC or by another accreditation body in the same arrangement. Two Canadian programs add a test of their own: Health Canada accepts only MDSAP certificates for device licenses, and Alberta's COR equivalency requires a “designated certification body.” Both are covered below.

The ISO 9001:2026 transition runs on SCC's dates. SCC's Bulletin 2026-23, dated September 25, 2026, lists September 15, 2029 as the date the 2015 version becomes obsolete: every existing certification under SCC accreditation must be transitioned to ISO 9001:2026 by then. That is fifteen days before the September 30, 2029, deadline in Global ACI's transition document. SCC also says it will begin assessing certification bodies for the new edition by March 31, 2027, and complete its transition decisions by September 30, 2027. Our 2015 or 2026 decision guide covers what that means if you are not yet certified.

ISO 14001 follows the same pattern. SCC's Bulletin 2026-21, dated August 14, 2026, lists April 16, 2029 as the date ISO 14001:2015 becomes obsolete for SCC-accredited certification, two weeks before Global ACI's April 30, 2029. Our ISO 14001:2026 tracker has the rest of the transition.

In depth: how SCC recognition applies to an exporting manufacturer, on our Toronto page.

CSA adoptions: CAN/CSA-ISO 9001, CAN/CSA-ISO 14001 and CSA Z45001

CSA Group publishes Canada's adoptions of the main management system standards as National Standards of Canada, developed under SCC requirements. The current listings in the CSA Group store:

Canadian designationAdoptsHow
CAN/CSA-ISO 9001:16 (R2025)ISO 9001:2015Without modification; reaffirmed 2025
CSA ISO 14001:16 (R2025)ISO 14001:2015Without modification; reaffirmed 2025
CSA Z45001:19 (R2023)ISO 45001:2018With Canadian deviations; reaffirmed 2023. Amendment 1:2026 adopts ISO's 2024 climate action amendment, also with Canadian deviations.

“Without modification” means the Canadian text is the ISO text, so CAN/CSA-ISO 9001 and ISO 9001 ask the same things. CSA Z45001 is different: its Canadian deviations make it a distinct standard, which is why Ontario and Alberta list it by name alongside ISO 45001.

The 2026 editions. ISO has published ISO 9001:2026 and ISO 14001:2026 (see our ISO 9001:2026 tracker and ISO 14001:2026 page). The Canadian adoptions listed above are still the 2015-based ones. For ISO 9001, CSA Group posted a notice of intent with SCC on June 3, 2026, to revise CAN/CSA-ISO 9001, with the project marked “proceeding to development.” A Canadian adoption of ISO 9001:2026: not yet published as of October 23, 2026.

Regulations can cite the Canadian adoption rather than the ISO original. The Medical Devices Regulations cite CAN/CSA-ISO 13485 “as amended from time to time,” and Health Canada treats CAN/CSA-ISO 13485:16 as equivalent to ISO 13485:2016.

In depth: choosing between ISO 45001 and CSA Z45001, on our Hamilton page.

Health Canada medical device licensing and MDSAP

  • Class II, III and IV. A medical device license application must include a quality management system certificate showing that the system under which the device is manufactured (Class II) or designed and manufactured (Class III and IV) meets CAN/CSA-ISO 13485. The requirements are in paragraphs 32(2)(f), 32(3)(j) and 32(4)(p) of the Medical Devices Regulations.
  • Only MDSAP certificates. Health Canada's transition notice replaced its earlier Canadian scheme (CMDCAS) with the Medical Device Single Audit Program and states that as of January 1, 2019, only MDSAP certificates are accepted. Health Canada recognizes the MDSAP auditing organizations that issue them. A standalone ISO 13485 certificate is not an MDSAP certificate.
  • Keeping Health Canada current. Under section 43.1, a manufacturer submits a copy of any new or modified quality management system certificate for a licensed device within 30 days of its issue.
  • Class I. Health Canada's guidance states that there are no regulatory quality management system requirements for Class I devices. Customers and export markets may still ask for ISO 13485.
  • One audit, five regulators. MDSAP is run by Australia's TGA, Brazil's ANVISA, Health Canada, Japan's Ministry of Health, Labour and Welfare with the PMDA, and the US FDA. The FDA states that it may accept MDSAP audit reports as a substitute for routine inspections, except for electronic product radiation control activities.

What changed in 2026. Amendments published in the Canada Gazette on June 17, 2026 (SOR/2026-110) revise the establishment licensing rules, including explicit documented-procedure requirements for Class II to IV manufacturers, importers and distributors. Registered on June 4, 2026, they come into force on the 180th day after registration, December 1, 2026, and do not amend the quality management system certificate provisions.

In depth: sequencing MDSAP against ISO 13485 for a device maker, on our Toronto page.

Ontario: Supporting Ontario's Safe Employers and the WSIB rebate

Supporting Ontario's Safe Employers (SOSE) is a voluntary program of the Ministry of Labour, Immigration, Training and Skills Development, run by the Chief Prevention Officer. The Chief Prevention Officer accredits occupational health and safety management system standards and recognizes employers that have implemented one. As of October 2025, the accredited standards are ISO 45001:2018, CSA Z45001-19, IHSA COR 2020, Responsible Care RC14001:2023 and Responsible Care RCMS:2023.

  • Evidence. A valid certificate from a certification body, or an audit report signed off by a lead auditor, dated within the twelve months before you apply. The system must have completed a full Plan-Do-Check-Act cycle, including a management review.
  • Keeping recognition. An internal audit closed out every year, a third-party audit every three years, and an annual attestation to the Chief Prevention Officer.
  • The WSIB rebate. Recognized Schedule 1 businesses in good standing can receive up to $300,000 in year one, $200,000 in year two and $100,000 in year three, with a minimum of $3,000 a year. No rebate can exceed 100% of the previous year's premiums, and the amount depends on factors including those premiums, the predictability rating and the program year.
  • One trade-off. Applying for SOSE disenrolls a business from the WSIB's Health and Safety Excellence program and its rebates.

Public construction contracts. Under Ontario Regulation 364/25, a listed public sector organization that requires health and safety management system pre-qualification for a construction project contract must recognize all Chief Prevention Officer-accredited systems as equivalent. The list includes municipalities, school boards, hospitals, boards of health, local housing corporations and publicly funded post-secondary institutions. For a contractor, that puts an ISO 45001 system on the same footing as IHSA COR 2020 in those procurements.

In depth: the full recognition criteria and rebate conditions, on our Hamilton page.

Alberta: COR and ISO 45001 equivalency

Alberta's Certificate of Recognition (COR) is awarded through the province's Partnerships in Injury Reduction program. It is an Alberta certificate, not ISO 45001: 13 Certifying Partners administer it, and an employer passes its audit with at least 80% overall and 50% in each element. Employers with up to 10 employees can use the Small Employer COR (SECOR) route.

Equivalency has existed since 2019-20. Alberta's Ministry of Labour and Immigration reported in its 2019-2020 annual report, for the year ended March 31, 2020, that it had recognized ISO 45001 as an equivalent to a Certificate of Recognition. The province's current “Apply for COR equivalency” web page, published March 24, 2025, sets out today's terms:

  • A valid ISO 45001:2018, CSA Z45001:19 or CSA Z1000:14 certification from a designated certification body.
  • Apply through an Alberta Certifying Partner with documentation verifying the certification. If approved, you receive a regular three-year COR, provided the scope of the ISO or CSA audit aligns with your operations.
  • Provide documentation showing the certification was maintained in years two and three of the COR cycle.
  • The page does not define “designated certification body.” Ask your Certifying Partner which bodies it accepts before you sign an audit contract.

What COR earns. WCB-Alberta's 2026 pricing guide states that you must have your COR before any Partnerships in Injury Reduction discount can be awarded. Holding a COR is worth 10% of the industry rate in the first year it is achieved and 5% in each year it is maintained; two performance measures can earn more, and you receive the highest of the three up to 20%. The combined discount with experience rating is capped at 60%.

In depth: when ISO 45001 adds something COR does not, on our Edmonton page.

British Columbia: WorkSafeBC program requirements

British Columbia makes the program itself a legal duty. Under section 3.1 of the Occupational Health and Safety Regulation, a formal occupational health and safety program must be initiated and maintained by every employer with 20 or more workers and at least one workplace with a moderate or high hazard rating (the rating defined in Schedule 3-A, the first aid schedule), and by every employer with 50 or more workers. The program then covers the whole operation. Below those thresholds, section 3.2 requires a less formal program based on regular monthly meetings with workers, with records.

Section 3.3 lists the contents: a statement of aims and responsibilities, regular inspections, written instructions, periodic management meetings, prompt incident investigation, records and statistics available to the joint committee or worker representative, and instruction and supervision of workers. The Regulation does not name ISO 45001, and a certificate does not discharge it. A well-built ISO 45001 system can contain every element, with BC's specific rules built into its register of legal requirements.

COR in BC. WorkSafeBC's Partners Program, also known as the Certificate of Recognition, is a voluntary employer certification program. Employers that pass a certification audit to the Board's standards and are in good standing are considered for financial incentives, calculated using 10% of base assessment premiums for each classification unit in the COR, with a minimum of the lesser of $1,000 or 75% of the premiums paid. WorkSafeBC's COR pages do not mention ISO 45001.

In depth: where each section 3.3 element sits in ISO 45001, on our Vancouver page.

The CPCSC and how ISO/IEC 27001 relates

The Canadian Program for Cyber Security Certification (CPCSC) is managed by Public Services and Procurement Canada (PSPC) with National Defence and sets cybersecurity requirements for suppliers on Government of Canada defense contracts. It is built on ITSP.10.171, which PSPC describes as closely adapted from NIST Special Publications 800-171 and 800-172.

LevelControlsAssessmentStatus (PSPC, September 29, 2026)
Level 113Annual self-assessment, or a valid US CMMC certification, which PSPC may accept case by caseLaunched April 2026. In select defense contracts beginning summer 2026; required at contract award, with proof of self-attestation in your CanadaBuys profile and when you bid.
Level 298External assessment by an SCC-accredited assessment organization, every three years, plus an annual affirmationUnder development. PSPC said in April 2026 it would be added to select contracts beginning spring 2027.
Level 3130+Assessment by National Defence, plus an annual affirmationUnder development.

An ISO/IEC 27001 certificate is not a CPCSC level. Neither PSPC's program pages nor SCC's CPCSC accreditation page mentions ISO/IEC 27001, and the two run under different accreditation schemes: SCC requires CPCSC assessment organizations to hold ISO/IEC 17020 (inspection body) accreditation, while ISO/IEC 27001 certification bodies sit in its management systems program. What ISO/IEC 27001 adds is the system that keeps controls working between assessments; the ITSP.10.171 controls can sit inside its risk treatment plan and Statement of Applicability.

In depth: sequencing CPCSC and ISO/IEC 27001 for a defense supplier, on our Ottawa page.

ISO/IEC 17025: laboratory accreditation

Laboratories are accredited to ISO/IEC 17025, never certified. The Standards Council of Canada runs a testing and calibration laboratory accreditation program based on ISO/IEC 17025, with specialty areas including environmental testing, calibration, forensic testing, fasteners, mineral analysis and information technology security evaluation. SCC states that it is a signatory to the international laboratory recognition arrangement, so testing by SCC-accredited laboratories is widely accepted internationally.

SCC is not the only Canadian option. CALA and Accreditation Canada Diagnostics both appear on Global ACI's Recognised Accreditation Bodies list. On the legacy ILAC MRA signatory list, still published at ilac.org, Canada's signatories are SCC (testing and calibration under ISO/IEC 17025, medical testing under ISO 15189 and proficiency testing providers under ISO/IEC 17043), the Canadian Association for Laboratory Accreditation (CALA) for ISO/IEC 17025 testing, and Accreditation Canada Diagnostics for ISO 15189 medical testing. CALA has also announced an ISO/IEC 17025 accreditation program for calibration laboratories with the National Research Council's calibration laboratory assessment service.

Medical and diagnostic laboratories are ISO 15189 territory, not ISO/IEC 17025. For what accreditation involves, see our ISO/IEC 17025 page and the Global ACI explainer.

Common questions

Is ISO 9001 certification recognized in Canada?

Yes. Canada adopts ISO 9001 without modification as CAN/CSA-ISO 9001, a National Standard of Canada (currently based on the 2015 edition), and certificates are issued by certification bodies accredited by the Standards Council of Canada or by another accreditation body in the Global ACI arrangement. SCC states that certification by its accredited bodies is widely accepted internationally. Check the certification body's accreditation in the accreditation body's directory, and check whether a customer contract names a specific requirement.

Do I need MDSAP to sell medical devices in Canada?

For Class II, III and IV devices, yes. The license application must include a quality management system certificate showing the system meets CAN/CSA-ISO 13485, and Health Canada has accepted only MDSAP certificates since January 1, 2019. A standalone ISO 13485 certificate does not meet that requirement. Class I devices need no device license, and Health Canada sets no regulatory quality management system requirement for them, although customers and export markets may still ask for ISO 13485.

Does ISO 45001 get a WSIB rebate?

Not on its own. The rebate comes through Ontario's Supporting Ontario's Safe Employers program. The Chief Prevention Officer recognizes employers that have implemented an accredited safety management system, and ISO 45001:2018 and CSA Z45001-19 are both on the list. Recognized Schedule 1 employers that meet the WSIB's conditions can receive up to $300,000, $200,000 and $100,000 over three years, with a minimum of $3,000 a year and never more than 100% of the previous year's premiums. A certificate is one of two acceptable forms of third-party audit evidence; a signed lead-auditor report is the other.

Is ISO 27001 the same as CPCSC?

No. The Canadian Program for Cyber Security Certification is a federal defense procurement requirement built on ITSP.10.171, a control standard adapted from NIST SP 800-171 and 800-172. ISO/IEC 27001 is an international management system standard. An ISO/IEC 27001 certificate is not a CPCSC level, neither PSPC's program pages nor SCC's CPCSC accreditation page mentions it, and the assessors are accredited under different schemes. The two fit together: ITSP.10.171 controls can sit inside an ISO/IEC 27001 risk treatment plan.

Can an ISO 45001 certificate get us a COR in Alberta?

Yes, through COR equivalency, which Alberta has offered since its 2019-20 fiscal year. An employer with a valid ISO 45001:2018, CSA Z45001:19 or CSA Z1000:14 certification from a designated certification body applies through a Certifying Partner and, if approved, receives a regular three-year COR. The audit scope must align with your operations, and you show the certification was maintained in years two and three. The province does not define “designated certification body” on its page, so ask your Certifying Partner which bodies it accepts before you choose one.

Does British Columbia require ISO 45001?

No. BC's Occupational Health and Safety Regulation requires a formal occupational health and safety program from employers with 20 or more workers and at least one workplace rated moderate or high hazard, and from all employers with 50 or more workers. It sets out what the program must contain but does not name ISO 45001, and a certificate does not discharge the requirement. An ISO 45001 system can be built to contain every required element.

Who accredits ISO/IEC 17025 laboratories in Canada?

The Standards Council of Canada accredits testing and calibration laboratories under a program based on ISO/IEC 17025. The Canadian Association for Laboratory Accreditation (CALA) is the other Canadian accreditation body for ISO/IEC 17025 testing on the legacy ILAC MRA signatory list, and it also appears on Global ACI's Recognised Accreditation Bodies list. Laboratories are accredited, never certified, and medical laboratories are accredited to ISO 15189 instead.

If you are planning for one of these programs, our ISO 45001, ISO 13485 and ISO/IEC 27001 pages describe how we work, or get in touch.

Sources

If any of this has moved since we last checked, tell us and we will check it and update the page.

Changelog

  • 2026-11-09 — Re-checked November 6 and 9, 2026: SCC (no new transition bulletin; ISO 14001:2015 still obsolete April 16, 2029), the Canadian Program for Cyber Security Certification (still Level 1 only; no new dates), Ontario's Safe Employers program, Alberta's Partnerships in Injury Reduction and WorkSafeBC's Certificate of Recognition incentives (unchanged), and Health Canada (no new MDSAP notice found). No rule or date on this page changed.
  • 2026-10-29 — Added SCC's ISO 14001:2026 transition dates from its Bulletin 2026-21 (August 14, 2026), read October 29. The other sections were last verified October 23.
  • 2026-10-26 — Added the Standards Council of Canada's ISO 9001:2026 transition dates from its Bulletin 2026-23 (September 25, 2026), checked October 26. The other sections were last verified October 23.
  • 2026-10-23 — Published. Every rule and program re-verified against SCC, CSA Group, Health Canada, the Medical Devices Regulations, Ontario's Chief Prevention Officer and WSIB, Alberta, WCB-Alberta, WorkSafeBC and PSPC pages on October 23, 2026.