Free tool · Runs in your browser
ISO audit days calculator for ISO 9001, 14001 and 45001.
Enter your headcount and your type of operation and see, as you type, how many auditor days your certification audits are likely to take: the initial audit, each surveillance audit and recertification, alone or as an integrated system. Nothing you enter is sent anywhere.
Last verified November 9, 2026
- Covers
- ISO 9001, ISO 14001 and ISO 45001, alone or combined, under accredited certification.
- Based on
- Global ACI-TECH-3-004 (M) (opens in a new tab), the Global ACI document that carries IAF MD 5:2023 forward.
- Privacy
- Your numbers stay in your browser. No email, no sign-up.
Estimate your certification audit days
Your estimate
Enter the number of people within the scope to see your estimate.
This is an estimate, not a quote. Your certification body determines the audit time for your organization and must be able to justify it, starting from the same rules this calculator uses.
Medical devices? ISO 13485 has its own, higher starting figures: use our ISO 13485 audit days calculator. ISO 27001 audit time is set by a different document, ISO/IEC 27006-1: use our ISO 27001 audit days calculator.
How audit time is worked out
Accredited certification bodies do not choose audit time freely. For ISO 9001, ISO 14001 and ISO 45001 they follow Global ACI-TECH-3-004 (M) (opens in a new tab), issued July 10, 2026, and applied from August 28, 2026, which carries IAF MD 5:2023 forward without substantive change. In outline:
- Effective personnel. Everything starts from the number of people whose work falls inside the scope of certification. Certification bodies count effective personnel, not payroll: part-time staff count as full-time equivalents, seasonal businesses count the people present at peak, and staff on other shifts, working remotely or based away from the site still count if the system covers their work. For ISO 45001, contractors working under your control count too.
- Complexity. For ISO 14001, the nature and seriousness of your environmental aspects put you in one of five complexity categories; the calculator covers the four with published starting figures, and the fifth, for unusual cases, is worked out case by case. For ISO 45001, the level of occupational health and safety risk puts you in one of three. ISO 9001 has a single starting figure, which the certification body then moves up or down for the risk of what you make or deliver.
- Adjustments. The starting figure is then adjusted for your situation. Reductions are allowed, but together they cannot take the time more than 30% below the starting figure, and each one has to be justified and recorded. Increases have no equivalent ceiling.
- Integration. When two or more standards are audited as one integrated system, the starting point is the sum of the separate audit times. Integration can bring that down by no more than 20%, and only to the extent that the system really is shared: one set of documentation, one internal audit program, one management review, joint objectives and auditors qualified across the standards. The certification body confirms the level of integration at Stage 1 and can change the time.
- Multi-site. Where several sites run the same activities under one system with central control, the certification body can audit a sample of them instead of every site. The sample is at least the square root of the number of sites at initial certification and recertification, and at least 0.6 times that at each surveillance audit, rounded up. The central function is audited every time it is due, and a higher-risk mix of sites means a larger sample.
- After certification. Surveillance audits in years one and two each take about a third of the initial audit time, and rarely less than a day. Recertification takes about two thirds of the time an initial audit would need at that point, so it is worked out again from your current numbers, not from the original audit.
Integrated audits follow Global ACI-TECH-3-008 (M) (opens in a new tab); multi-site sampling follows Global ACI-TECH-3-001 (M) (opens in a new tab). The calculator applies the starting figures and these rules; it cannot see the factors specific to your organization.
What makes audit time go up or down
Likely to add time
- Work spread across more than one building or location within the scope
- Complex processes, many different activities, or design and development responsibility
- For ISO 9001, products or services whose failure could cause serious harm
- Significant environmental aspects or hazardous work beyond what the category assumes
- Heavy regulatory requirements, or a history of serious findings
- Major changes since the last audit, interpreters, or temporary sites that need a visit
Likely to reduce time
- A narrow scope, or no design and development responsibility
- Simple, repetitive processes, or many people doing the same task
- A high level of automation
- A mature system with a good audit record
- Staff who are only partly within the scope
- Lower-risk products or services, for ISO 9001
The biggest lever is one you control before any audit is booked: the scope. Time is set by the people inside the scope of certification, so a scope drawn wider than the business needs carries extra audit time through the whole three-year cycle.
Why a quote with far fewer days is a warning sign
The starting figure comes from your effective personnel and your category, so two accredited certification bodies looking at the same organization should start in the same place. From there, every reduction has to be justified and recorded, reductions together stop at 30% below the starting figure, integration stops at 20% below the combined time, and on-site time should not fall below about 80% of the calculated time.
So if a quote shows far fewer days than this estimate, the usual explanation is one of three: it counts fewer people, it puts you in a lower category, or it reduces further than the rules allow. Ask the certification body for its effective personnel figure, the category it used and each adjustment. An accredited certification body has to be able to show that working to its accreditation body, and an audit that is too short to cover your system is a risk to the certificate your customers rely on.
What it means for your budget
Certification audits are quoted in auditor days, and a certificate runs on a three-year cycle: the initial audit, two surveillance audits and recertification. Use the calculator to check that quotes are built on a comparable number of days for each of those audits, not just on one total, and plan your own people's time around the same days: managers and staff are interviewed throughout every audit.
For what certification costs in full, see our ISO certification cost guide and our ISO 9001 certification cost guide.
Common questions
How many audit days does ISO 9001 certification take?
It depends mainly on the effective number of people within the scope of certification and, for ISO 9001, on the risk of what you make or deliver. The initial certification audit covers Stage 1 and Stage 2 together. Enter your numbers in the calculator above for an estimate of the initial audit, each surveillance audit and recertification. Your certification body sets the final figure and has to justify it.
What counts as effective personnel?
Everyone whose work falls within the scope of certification, on every shift. Part-time staff count as full-time equivalents, seasonal operations count the people present at peak, and people who work remotely or away from the site still count if the system covers their work. For ISO 45001, contractors working under your control are included. People outside the scope do not count, which is why defining the scope is the first real decision in a certification project.
How much time does an integrated audit save?
At most 20% of the combined time of the separate audits, under Global ACI-TECH-3-008. The actual saving depends on how integrated your system really is: shared documentation, one internal audit program, one management review, joint objectives, and auditors qualified for more than one standard. An integrated audit can also take longer if the combination is complex. The certification body confirms the level of integration at Stage 1.
Can the certification body reduce our audit time?
Yes, for factors such as a narrow scope, simple or repetitive processes, high automation or a mature system. Under Global ACI-TECH-3-004, reductions together cannot take the time more than 30% below the starting figure, every reduction has to be justified and recorded, and moving planning or report writing off site is not a reason to cut time on site below 80%. A quote far below the calculator's range is worth questioning.
How are organizations with several sites audited?
If the sites run the same activities under one management system with central control, the certification body can audit a sample. Under Global ACI-TECH-3-001, the minimum sample is the square root of the number of sites at initial certification and recertification, and 0.6 times the square root at each surveillance audit, rounded up, with the central function audited each time it is due. Sites with different activities, or a higher-risk mix, need more.
Does the calculator cover ISO 13485 or ISO 27001?
Not on this page, because both use their own audit-time rules. ISO 13485 has its own starting figures in Global ACI-TECH-3-007: use our ISO 13485 audit days calculator. ISO/IEC 27001 audit time is set by ISO/IEC 27006-1, with its own factors: our ISO 27001 audit days calculator gives a realistic range.
Planning the whole project? See how to get ISO certified and how long ISO 9001 takes. Already certified to ISO 9001 or ISO 14001? Our transition deadline calculator gives the date your certificate has to move to the 2026 edition.
We help organizations prepare for certification to ISO 9001, ISO 14001 and ISO 45001, separately or as one integrated system. Talk to us about yours.
Sources
- Global ACI-TECH-3-004 (M) v1.0, Determination of audit time of quality, environmental, and occupational health and safety management systems — issued July 10, 2026, applied from August 28, 2026; IAF MD 5:2023 carried forward without substantive change. Our Global ACI page explains the change from IAF.
- Global ACI-TECH-3-008 (M) v1.0, audits of integrated management systems — issued July 10, 2026, applied from August 28, 2026; the 20% limit on integration reductions.
- Global ACI-TECH-3-001 (M) v1.0, multi-site certification — issued July 10, 2026, applied from August 28, 2026; sample sizes for multi-site organizations.
Our conventions, not requirements: part-time hours are converted at 40 hours a week; a partly integrated system is shown at up to 10% below the combined time; each headcount takes the figure for its whole size range, although the rules read the ranges as a smooth line, so near the bottom of a range a certification body may start up to one step lower; for organizations larger than the published figures cover, the estimate continues their progression; day figures are rounded to the nearest half day.
Changelog
- 2026-11-09 — Published. Checked against Global ACI-TECH-3-004 (M), TECH-3-008 (M) and TECH-3-001 (M), version 1.0 of each, issued July 10, 2026, and applied from August 28, 2026.