Skip to content

Free tool · Runs in your browser

ISO 27001 audit days calculator a realistic range, site by site.

Enter the people in your ISMS scope and where they work, and see the range of auditor days certification bodies are likely to quote for the initial audit, each surveillance audit and recertification. Nothing you enter is sent anywhere.

Last verified November 15, 2026

Covers
ISO/IEC 27001 certification audits under accredited certification.
How it works
Glocal Insight's own estimate model, independent of any certification body, shown as a realistic range.
Privacy
Your numbers stay in your browser. No email, no sign-up.

Estimate your ISO 27001 audit days

People in the ISMS scope at your main site

Count everyone doing work under your control within the scope, including contractors and remote staff attached to this site. Part-time staff count as full-time equivalents.

Other sites

For each location, enter the people working there. Up to 20.

Your estimate

Enter the number of people in your ISMS scope to see your estimate.

This is an estimate, not a quote. It comes from Glocal Insight's own estimate model, which is independent: no certification body supplied or endorses it. Your certification body determines the audit time under ISO/IEC 27006-1 and must be able to justify it.

For ISO 9001, ISO 14001 and ISO 45001, use our ISO audit days calculator; for medical devices, our ISO 13485 audit days calculator.

How ISO 27001 audit time is set

  1. The rules. Accredited certification bodies set ISO/IEC 27001 audit time under ISO/IEC 27006-1:2024, which every ISO 27001 audit has followed since March 31, 2026. It starts from the number of people doing work under the organization's control within the scope of the information security management system, then adjusts for the complexity of the business and its IT, and for how the organization is spread across locations.
  2. Who counts. Employees and others working under your control inside the ISMS scope, including contractors and remote staff. The 2024 rules also recognize groups of people performing the same activities, which can bring the count down. People outside the scope do not count.
  3. Several sites. Each location adds time of its own. Expect the initial audit to be built up site by site and to cover every location, and each surveillance audit to cover the central function plus a rotating sample of the others.
  4. Why quotes differ. Certification bodies apply the same rules differently. Some size information security audits close to the general management system figures; others start nearer the information security tables, which give more time, especially to small organizations. That is why this calculator shows a range, not a single number.
  5. After certification. Surveillance audits in years one and two usually take the same number of days. Recertification in year three typically takes about as long as Stage 2 of the initial audit, recalculated from your organization at that point.

What makes ISO 27001 audit time go up or down

Likely to add time

  • Complex business processes, many products or services, or heavy legal and contractual requirements
  • Complex IT: many platforms, cloud environments, development and outsourced operations in scope
  • Highly sensitive information, such as client-confidential, health or financial data
  • Several locations, each with its own people and controls
  • A first certification, or major changes since the last audit

Likely to reduce time

  • A narrow, well-defined ISMS scope
  • Many people performing the same, low-risk activities
  • Simple IT, few platforms and little in-house development
  • A mature system with a clean audit history

The lever you control is the scope. Audit time follows the people and locations inside the ISMS scope, so draw it around the services your customers rely on, not around the whole company by default.

Comparing certification quotes

Ask each certification body for the same four numbers: the people it counted, the sites in the plan, the days for each audit in the three-year cycle, and its day rate. A quote at the low end of the range is not wrong in itself, but it should still cover your scope properly, because an audit too thin to test your controls is a weak certificate to put in front of customers.

For the whole budget, including preparation, see our ISO 27001 certification cost guide. Preparing for the audit? Our free ISO 27001 internal audit checklist covers clauses 4 to 10 and Annex A sampling.

Common questions

How many audit days does ISO 27001 certification take?

It depends mainly on how many people work within the ISMS scope and how many locations they work from, then on the complexity of the business and its IT. Small single-site companies often see a few days for the initial audit, Stage 1 and Stage 2 together, and about a day for each surveillance audit; multi-site organizations can need several times that. Enter your numbers above for a range, and ask each certification body for its own figure.

Why do ISO 27001 quotes differ so much between certification bodies?

All accredited bodies follow ISO/IEC 27006-1, but they apply its starting points and adjustments differently. Some size information security audits close to the general management system figures, while the information security rules themselves point to more time. Ask each body for the headcount it used, the sites it counted and every adjustment.

Did ISO 27001:2022 change the audit time?

The 2022 edition of ISO/IEC 27001 changed the controls, not the audit-time rules. What changed audit time is ISO/IEC 27006-1:2024, which every ISO 27001 audit has followed since March 31, 2026.

How are organizations with several sites audited?

Each location adds time. At the initial audit every site is normally visited. At surveillance, the central function is audited each year with a rotating sample of the other sites, so every site is covered over the three-year cycle, while the yearly surveillance time stays about the same.

Is this calculator based on ISO/IEC 27006-1?

No. It is Glocal Insight's own estimate model, not a copy of that standard, and no certification body supplied or endorses it. The typical figure builds on the public audit-time starting points for management systems, applied site by site; the upper end reflects the information security rules, which can give more time. Your certification body determines the actual time and must be able to justify it.

We help organizations build and certify ISO/IEC 27001 information security management systems. Comparing advisers? See how to choose an ISO 27001 consultant, or talk to us about yours.

About the model

Glocal Insight's own estimate model, not a requirement and not a reproduction of ISO/IEC 27006-1. The typical figure applies the public starting figures in Global ACI-TECH-3-004 (M) (opens in a new tab) site by site, with Stage 1 included; the low end allows for reductions of up to 30%; the high end follows our own information-security curve plus time for each additional site. Surveillance is shown as the same figure in years one and two, and recertification at about the length of the initial Stage 2. Sites sampled at surveillance follow Global ACI-TECH-3-001 (M) (opens in a new tab). This page draws on Global ACI publications, used with acknowledgment. Figures are rounded to the nearest half day.

Cite this calculator

Glocal Insight, ISO 27001 Audit Days Calculator, 2026. www.glocalinsight.com/resources/iso-27001-audit-days-calculator/

Changelog

  • 2026-11-15 — Published. Glocal Insight's own estimate model, using the public starting figures in Global ACI-TECH-3-004 (M) for the typical case and our own information-security curve for the upper end.