Guide · ISO 27001 certification
ISO 27001 certification: cost, timeline and steps.
ISO 27001 certification costs two bills plus your team's time: the certification body's audits, priced from audit time set under ISO/IEC 27006-1:2024 and driven mainly by the number of people in your ISMS scope, and the preparation, where the controls you still have to put in place are usually the biggest line. How long it takes depends on how much already runs, but the order is fixed: scope, risk, Statement of Applicability, controls running long enough to leave records, an internal audit and a management review, then Stage 1 and Stage 2.
Last verified October 30, 2026
- What sets the audit fee
- People in the ISMS scope, under ISO/IEC 27006-1:2024, times the certification body's day rate.
- The line most budgets miss
- Controls and evidence: engineering and operations time to run them, and the records that prove it.
- The edition
- ISO/IEC 27001:2022. 2013 certificates ended with the transition on October 31, 2025.
- Where most projects start
- A gap analysis. Ours is typically in the low five figures.
Every cost, itemized
This is the full list for a company certifying to ISO 27001 for the first time. Some lines are optional. None of them stop when the certificate arrives: the certificate runs on a three-year cycle, with audits every year and an ISMS that has to keep running between them.
| Cost | Who you pay | When | What sets the amount |
|---|---|---|---|
| The standard | A standards seller | Before you start | ISO/IEC 27001:2022 and its 2024 amendment for the person who owns the ISMS. ISO/IEC 27002:2022, the control guidance, is optional but useful. |
| Gap analysis | Consultant (optional) | First | How much of the ISMS scope, the risk work and the controls already exist and are evidenced. |
| Risk assessment and treatment | Your team, with or without a consultant | Early | How many information assets, systems and suppliers sit inside the scope, and how many risk owners must decide. |
| Control implementation | Your payroll and your tools budget | After risk treatment | The controls your risk treatment selects and you do not yet run: access reviews, logging, backups, supplier checks, secure development, incident response. Often the largest line. |
| Policies, procedures and evidence | Your team, with or without a consultant | During the build | How many controls apply, and whether evidence comes from tools you already use or from manual records. |
| Awareness training | Training provider or consultant | Before Stage 2 | Everyone in scope needs it, with deeper training for the people who will run internal audits. |
| Internal audit | Your trained staff or an outside auditor | Before Stage 2, then at planned intervals | Whether you build an independent internal audit in house or buy it each year. |
| Compliance software | Vendor (optional) | Any time | A subscription you pay for the life of the certificate. Price it over three years. |
| Stage 1 and Stage 2 audits | Certification body | After the internal audit and management review | Audit time from ISO/IEC 27006-1:2024, times the certification body's day rate, plus any travel and fees the quote lists. |
| Surveillance audits | Certification body | In each of the two years after certification | The first must fall within 12 months of the certification decision. |
| Recertification | Certification body | Year 3, before the certificate expires | Recalculated from your scope at the time. Late recertification can mean starting again from Stage 2. |
How the certification body sets ISO 27001 audit time
ISO 9001, ISO 14001 and ISO 45001 audit days come from a free, public table. ISO 27001 does not. Accredited certification bodies set ISMS audit time under ISO/IEC 27006-1:2024, the requirements for bodies that audit and certify information security management systems, published by ISO in March 2024. Its audit-time rules sit in Annex C, and the standard is sold, not published free. So check the inputs instead of a table. The 2024 rules turn on:
- The effective number of personnel. The calculation starts from the people doing work within the ISMS scope, with a defined method for the initial count.
- People doing identical activities. The 2024 revision added flexibility where many people in scope do the same work, such as a large support team, so the minimum audit time can come out lower than under the 2015 rules.
- Several sites. The approach for multi-site organizations was clarified.
- Scope extensions. Adding a product, a team or a location later has its own audit-time requirements.
- Remote work. Organizations with few or no physical sites can be certified, and their report and certificate state that activities are conducted remotely. The audit report records the extent and effectiveness of any remote auditing.
ANAB- and SCC-accredited certification bodies had to complete their move to the 2024 rules by March 31, 2026, so any quote you receive now should be built on them. Ask for the people count, the days per audit and the day rate as separate numbers, and compare quotes line by line. Audit time is the certification body's calculation, and its fee is set by the certification body. Our certification cost guide shows how the same arithmetic works for ISO 9001.
For a ballpark before you ask, our free ISO 27001 audit days calculator gives a realistic range for each audit in the three-year cycle, site by site.
Internal costs: where an ISMS budget really goes
No quote includes your team's time, and in ISO 27001 it is often the larger number. The certification body audits a working system, so budget for:
- An ISMS owner with the authority to make decisions and protected hours every week.
- Risk owners who accept, treat or reject the risks in their area and sign off on the treatment plan.
- Engineering and IT time to close control gaps and to produce evidence: access reviews, logging, backups and restore tests, change records, vulnerability handling.
- Supplier work: identifying the suppliers that touch in-scope information and recording how you assess them. Cloud and SaaS providers are suppliers too.
- Top management for the information security policy, objectives and the management review.
- Everyone in scope for awareness training and audit interviews.
The cheapest ISMS is the one built on tools you already run. When evidence comes straight from existing systems, the yearly cost of staying certified falls. When every control needs a manual record, it rises every year.
Scope, Statement of Applicability and Annex A: the three cost levers
Scope
Scope sets the people count, the audit time and the number of systems that need controls. A scope drawn around the product your customers buy is usually cheaper than "the whole company". It has to be accurate: customers read the scope statement on the certificate. See our scope of certification entry.
Statement of Applicability
The Statement of Applicability lists every Annex A control, says whether it applies and is implemented, and justifies each inclusion and exclusion (clause 6.1.3 d). Auditors trace it back to your risk treatment decisions. A control kept without a risk behind it costs money every year. One excluded without a reason becomes a finding.
Annex A in the 2022 edition holds 93 controls in four groups: 37 organizational, 8 people, 14 physical and 34 technological, aligned with ISO/IEC 27002:2022. You do not buy or build all 93. Your risk treatment decides which ones you need, and a fully cloud-hosted company may apply few physical controls of its own, with the reasons on record.
ISO 27001 certification steps, and the evidence needed before Stage 2
The order below follows what an accredited certification body must check under ISO/IEC 17021-1. Each step leaves a record the auditor will ask for.
- Set the ISMS scope. Decide which products, systems, locations, teams and data the certificate will cover, and where it touches things outside it. Scope sets the people count, the audit time and the work. Everything else follows from it.
- Run a gap analysis. Compare what you run today with the standard's requirements and with the Annex A controls, and turn the gaps into a dated plan.
- Assess risk. Pick a method you can repeat, then identify, analyze and evaluate information security risks with named owners. The certification body expects the same method to produce comparable results next year.
- Decide risk treatment and write the Statement of Applicability. For each risk, decide how it will be handled and which controls that needs. The Statement of Applicability then lists every Annex A control, whether it applies, why, and whether it is implemented (clause 6.1.3 d).
- Implement controls and policies. Put the selected controls into daily work and write only the policies and procedures your people will use. Train everyone in scope.
- Run the ISMS and collect records. Access reviews, incident logs, supplier reviews, change records and risk updates only exist once the system has been running. Time is the one input money cannot replace.
- Hold the internal audit. An audit of the whole ISMS by people who did not build the part they audit, with findings and corrective actions on record.
- Hold the management review. Top management reviews audit results, risks, incidents and objectives, and records its decisions.
- Choose an accredited certification body. Check its accreditation for ISO/IEC 27001:2022 in the accreditation body's own directory, and get the audit time and day rate as separate numbers.
- Stage 1. The certification body reviews your documented ISMS and readiness, and evaluates whether internal audits and management reviews are being planned and performed.
- Stage 2. The certification body evaluates whether the ISMS is implemented and effective: controls, records, objectives, internal audit and management review.
- Close findings and receive the decision. Major nonconformities must be corrected and verified within six months of the last day of Stage 2, or Stage 2 is repeated. Then the certification body decides.
The minimum before Stage 2. A defined scope, a risk assessment and a risk treatment plan, a Statement of Applicability, controls running long enough to leave records, a completed internal audit and a management review. Stage 1 checks whether the internal audit and management review are being planned and performed. The gap between Stage 1 and Stage 2 has to leave you time to resolve what Stage 1 raises. If it does not, the certification body can repeat Stage 1 or move Stage 2.
That is why timelines vary so much. The audits are short. The running period that produces records cannot be bought, and it starts only once the controls are in place.
After the certificate: years two and three
The certificate runs on a three-year cycle that starts on the certification decision. A surveillance audit falls in each of the two years after it, the first within 12 months of the decision. A recertification audit must be planned early enough to renew the certificate before it expires. If recertification is not finished in time, the certificate lapses. It can be restored within six months of expiry once the outstanding work is done, and after that you start again from at least a Stage 2 audit. Keep the internal audit, management review and risk updates running every year, or the surveillance audit becomes the place you find out they stopped.
Six questions for every certification body quote
- What headcount did you use, and how? Audit time follows the effective number of personnel within the ISMS scope. Ask the certification body which people it counted, and whether it treated any groups as doing identical activities.
- How many audit days, at what day rate? Get the days for Stage 1, Stage 2, each surveillance audit and recertification, and the day rate, as separate numbers.
- Which sites or locations are in the plan? ISO/IEC 27006-1:2024 clarified how multi-site organizations are calculated. Make sure the quote matches your real footprint, including remote teams.
- How much is remote? Remote auditing affects travel costs. The 2024 rules require the audit report to state the extent and effectiveness of remote auditing.
- What happens if we add a product or a site later? The 2024 revision added requirements for audit time on scope extensions. Ask what an extension would add.
- Which accreditation body accredits you for ISO/IEC 27001:2022? Then check it in that accreditation body's own directory. A certificate your customer will not accept is the most expensive option.
Then check the certificate side: our guide to verifying an ISO certificate shows how to confirm a certification body's accreditation.
Start with a number you can trust
A gap analysis turns this page into your budget. It defines your ISMS scope, maps what you already run against Annex A, lists the controls and evidence still to build, and gives you a dated plan to Stage 2. A standalone gap analysis from us is typically in the low five figures, and every engagement after it is priced to its scope. Our ISO 27001 service overview shows what a full engagement covers. We are headquartered in the Kansas City metro, working with companies across the US and Canada, on site and remotely.
Free tools and downloads
- ISO 27001 audit days calculatorA realistic range of ISO 27001 audit days for each audit in the cycle, built site by site.
- ISO 27001 internal audit toolkit52 ISMS checks for clauses 4 to 10 and Annex A sampling for all 93 controls, linked to your SoA.
- State privacy laws and their security dutiesSecurity duties, assessments and processor contracts in every state privacy law in force, and where ISO 27001 fits.
- Is ISO 27001 being revised?The 2022 edition, its 2024 climate amendment and when ISO's next review is due.
Common questions
How much does ISO 27001 certification cost?
It is two bills plus your own time. The certification body's fee comes from audit time under ISO/IEC 27006-1:2024, which is based mainly on the effective number of people in the ISMS scope, times its day rate, for Stage 1 and Stage 2, two surveillance audits and recertification in year three. Preparation covers the gap analysis, risk work, control implementation, policies, training and internal audit, done by your team, a consultant or both. Control implementation is often the largest line. A standalone gap analysis from us is typically in the low five figures.
How long does it take to get ISO 27001 certified?
It depends on how much of your ISMS already runs. The fixed part is the sequence: scope, risk assessment, risk treatment and the Statement of Applicability, controls in operation, records, a full internal audit and a management review, then Stage 1 and Stage 2. At Stage 1, the certification body evaluates whether internal audits and management reviews are being planned and performed. Records only come from time, so a plan that skips the running period is the one that slips. A gap analysis gives you a dated plan for your scope.
How do I get ISO 27001 certified?
Set the scope, run a gap analysis, assess risk, decide risk treatment, write the Statement of Applicability, implement and run the controls, hold an internal audit and a management review, then book an accredited certification body for Stage 1 and Stage 2. The certification body makes the decision. ISO itself does not certify.
What is the ISO 27001 certification process?
An accredited certification body runs a two-stage initial audit. Stage 1 reviews your documented ISMS and readiness. Stage 2 evaluates whether the ISMS is implemented and effective. After certification, surveillance audits take place in each of the next two years, the first within 12 months of the certification decision, and a recertification audit renews the certificate before it expires at the end of the three-year cycle.
Is ISO 27001 certification worth it?
It is worth it when buyers ask for it or when you need a working security management system anyway. ISO describes certification as possible but not obligatory: some organizations implement the standard without certifying. The certificate gives customers independent evidence, from an accredited certification body, that your ISMS meets the standard. Budget for the full three-year cycle, not only year one.
Is an ISO 27001:2013 certificate still valid?
No. Under IAF MD 26:2023, the transition to ISO/IEC 27001:2022 ended on October 31, 2025, and certifications based on the 2013 edition expired or were withdrawn at the end of the transition period. Initial certification and recertification audits have been to the 2022 edition only since April 30, 2024. Certify to ISO/IEC 27001:2022, which now includes its 2024 amendment on climate action changes.
Related
- ISO 27001 consulting — scope, risk, Statement of Applicability, controls and audit support.
- How to choose an ISO 27001 consultant — scope, risk treatment and Statement of Applicability tests.
- What ISO certification costs — the audit-day method for ISO 9001 and other standards.
- ISMS and audit days in our glossary.
Sources
- ISO/IEC 27006-1:2024 (ISO) — edition 1, published March 2024; additional requirements for bodies that audit and certify ISMS.
- ANAB, ISO/IEC 27006-1:2024 transition — Annex C audit time, effective number of personnel, scope extensions, multi-site, remote audits; transition by March 31, 2026.
- Standards Council of Canada, bulletin 2024-18 — Annex C changes (C.2.1, C.3.4, C.6, C.7) and the March 31, 2026, deadline.
- CQI, Updated ISO/IEC 27006-1:2024, May 22, 2024 — flexibility for identical activities; minimum audit time may be lower.
- IAF MD 26:2023, Transition requirements for ISO/IEC 27001:2022 — April 30, 2024, and October 31, 2025; 2013 certifications expire or are withdrawn.
- ISO/IEC 27001:2022/Amd 1:2024 (ISO) — climate action changes, published February 2024.
- ISO/IEC 27001:2022 sample — third edition, aligned with ISO/IEC 27002:2022; Statement of Applicability in clause 6.1.3 d).
- ISO/IEC 27002:2022 sample — contents: controls 5.1 to 5.37, 6.1 to 6.8, 7.1 to 7.14 and 8.1 to 8.34.
- ISO/IEC 17021-1:2015, section 9 (IAS) — clauses 9.1.3.2, 9.1.3.3, 9.3.1.2.2, 9.3.1.2.4, 9.3.1.3, 9.5.3.2 and 9.6.3.
- ISO, ISO/IEC 27001 information security management — certification possible but not obligatory; ISO does not certify.
Changelog
- 2026-10-30 — Published. Audit-time basis from ISO/IEC 27006-1:2024 (ISO record, ANAB transition notice, SCC bulletin 2024-18, CQI article by the standard's co-editor); edition and transition facts from ISO and IAF MD 26:2023; Annex A structure from the ISO/IEC 27002:2022 contents; certification process from ISO/IEC 17021-1:2015 section 9.