Research · 32 supplier documents · Verified November 9, 2026
What major manufacturers require from suppliers: ISO 9001, AS9100, IATF 16949, ISO 14001 (2026)
We read the supplier quality manuals and requirement documents that 32 major manufacturers publish, and sorted each one by what it actually asks for: a certificate, an expectation, or a conforming system without a certificate.
Last verified November 9, 2026
- Sources
- Each company's own current public document, downloaded from its site or the file its supplier page links to, and read in full.
- Coverage
- 32 documents across 6 sectors: aerospace & defense (12), automotive & commercial vehicles (8), industrial & electrical (5), building products & hvac (4), electronics & semiconductors (2), medical devices (1).
- Left out
- Documents marked confidential, proprietary, restricted or sensitive, even where a copy is online.
Three levels, and why your purchase order decides
A supplier document can ask for a certificate, say it would like one, or ask only that your system conforms to a standard. Those are different obligations, so every row in the table carries one of three levels:
- Certificate required 15 of 32
- For the baseline supplier it describes, the document says the supplier must hold a certificate from a third party. Where it sets tiers by supplier type, we mark it required if the main production-supplier tier needs a certificate. Alternatives the document itself offers, such as an approved plan or an exemption, are spelled out in the row.
- Certification expected 4 of 32
- The document asks for certification only with words like expects, seeks, encourages or should. Not meeting it is not a stated breach, though it can count against you when business is awarded.
- System only 13 of 32
- The document asks for a management system that conforms to a standard but does not require a certificate. This includes documents where the customer's own audit can replace a certificate.
The level describes the public document. It does not describe your contract. Most of these documents say the purchase order or contract decides which tier or clause applies, and some apply only when the PO invokes them. A PO can ask for more than the manual, or less. When a buyer says certification is required, ask which clause of which revision says so.
Five things the documents show
- A certificate is required in 15 of 32 documents. The other 13 ask for a management system that conforms to a standard, without requiring a certificate, and 4 state certification as an expectation. "Our customers all require ISO 9001 certification" may be true in practice, but fewer than half of these documents put it in writing.
- Even in aerospace, AS9100 is not universal. Boeing requires 9100-series certification from production suppliers, listed in the IAQG OASIS database. Lockheed Martin Aeronautics defaults to AS9100 but accepts third-party ISO 9001 for production parts outside the F-35 program and for several equipment categories. Raytheon accepts its own audit in place of a certificate, and Blue Origin names no quality management standard at all.
- Supplier type changes the answer. The same document often sets different minimums for producers, distributors (AS9120), repair stations (AS9110), tooling and raw-material suppliers, and calibration or test laboratories (ISO/IEC 17025 accreditation). Moog sets a minimum for each supplier type and each of its groups; Eaton sets one for each business group.
- Automotive leans on IATF 16949, with ISO 9001 as a step. Allison requires IATF 16949 for on-highway suppliers unless it grants an exemption. Lear asks every production location for both ISO 9001 and IATF 16949 and accepts ISO 9001 alone only with written approval. Dana accepts either. BorgWarner, AM General and Micron describe ISO 9001 as the step toward IATF 16949.
- ISO 14001 certification is rarely mandatory. 9 of 32 documents name ISO 14001, but only Volvo Group requires a third-party certified environmental management system from every supply partner. Lear ties certification to size (more than 500 employees). Most others encourage an environmental management system or accept one without a certificate.
The table: 32 manufacturers and what they ask of suppliers
The standards column lists every standard the document names, as a requirement, an expectation or an accepted route. Read the description before treating any of them as mandatory. Each document link opens the company's own file.
32 documents
| Company | Sector | Level | Standards named | What the document asks | Document | Verified |
|---|---|---|---|---|---|---|
| Boeing | Aerospace & defense | Certificate required | AS9100, AS9110, AS9120 | Suppliers that design, develop or produce aerospace product (Appendix A) must be certified to 9100 (AS9100, EN 9100, JISQ 9100 or IA9100). Distributors (Appendices D and E) must be certified to 9120, and maintenance/repair suppliers (Appendix C) to 9110. The certificate must come from an accredited certification body listed in the IAQG OASIS database. AS9003 is no longer recognized for production approvals (Appendix B obsolete). The contract decides which appendix applies. | Boeing Quality Management System Requirements for Suppliers (D6-82479) (opens in a new tab) Rev K, November 14, 2025 | Nov 9, 2026 |
| Lockheed Martin (Aeronautics) | Aerospace & defense | Certificate required | AS9100, AS9120, AS9110, ISO 9001 | The default is a third-party certified AS9100 QMS for all products and services. Exceptions: distributors need AS9120, or AS9100 with distribution in scope. Maintenance/repair of government assets needs AS9110, or ISO 9001 plus FAA Part 145, or AS9100 for OEMs. ISO 9001 third-party certification is the minimum for ground support equipment, manufacturing support equipment, COTS hardware and production parts outside the F-35 program. AS9100/9110/9120 certificates must come from an accredited registrar listed in OASIS, with the buyer given access to Tier 2 data. ISO 9001 certificates must come from an IAF-accredited registrar. | Appendix QX, Supplier Quality Requirements (opens in a new tab) Revision 10, released 1 January 2023, last reviewed 23 October 2025 (current revision on LM's Quality Appendices page) | Nov 9, 2026 |
| Lockheed Martin (Rotary and Mission Systems / Sikorsky) | Aerospace & defense | Certificate required | AS9100, ISO 9001, AS9120, AS9110, ISO/IEC 17025 | On Sikorsky purchase orders: AS9100 for manufacturers of flight-safety parts, build-to-print parts and seller-designed parts (COTS excluded). ISO 9001 only when the PO line item says so. AS9120 for distributors. AS9110 or airworthiness-authority certification for repair stations. Nadcap AC7004 for special processors, with an AS9003-level QMS as the minimum. Nadcap or international laboratory accreditation for calibration and lab services. AS9100 certificates must be listed in OASIS, and only certifications from the buyer or an IAF-accredited body are accepted. Other RMS orders: an appropriate QMS with no certificate required, but uncertified suppliers may get an LM on-site assessment. | Supplier Quality Requirements, Procure-2-011 (opens in a new tab) Effective 12/7/2025 (listed as 2025-DEC on LM's RMS supplier page) | Nov 9, 2026 |
| Raytheon (RTX) | Aerospace & defense | System only | AS9100, AS9120, ISO 9001 | Quality Notes apply only when the purchase order invokes them. AL requires compliance with AS9100 or AS9120, proven either by a current third-party certificate from an IAQG-recognized registrar or by passing Raytheon's own RESA Chapter 0 audit. One of the two is needed when the PO is accepted. AN does the same for ISO 9001 and accepts AS9100/AS9110/AS9120/ISO 9001/ISO 13485/ISO 16949 certificates from IAQG- or IAF-accredited registrars. A certificate is the usual route, but a Raytheon audit can replace it. | Raytheon Quality Note AL, AS9100/AS9120 Quality Management System (with Quality Notes AN, ISO 9001 QMS, and AG, Commercial QMS) (opens in a new tab) AL Rev 10, 10/05/2023; AN Rev 10, 07/29/2021; AG Rev 15, 05/12/2026 (current revisions in the qnotes.raytheon.com index) | Nov 9, 2026 |
| Blue Origin | Aerospace & defense | System only | ISO/IEC 17025 | Applies to all line items on all POs. The supplier must keep a QMS that makes goods and services conform to the PO. No standard is named and no certificate is required. A supplier that does hold a third-party QMS certificate must report its suspension or disapproval within 3 business days. Calibration service providers and test laboratories must be accredited to ISO/IEC 17025 (the 2024 Rev D only said 'preferred'). | Blue Origin Purchase Order Quality Requirements (CMCD-30450) (opens in a new tab) Rev K, effective September 1, 2026 | Nov 9, 2026 |
| L3Harris Technologies | Aerospace & defense | System only | AS9100, ISO 9001 | The supplier must have a QMS in accordance with AS9100 and/or ISO 9001 certification, or an L3Harris-approved QMS. If the PO or another agreement conflicts with the manual, the PO wins. | L3Harris Supplier Quality Manual (QA-01.1) (opens in a new tab) v3 (PDF created August 2022, posted April 2023; still the file linked from L3Harris' Supplier Quality Manual page) | Nov 9, 2026 |
| BAE Systems (Platforms & Services, Combat Mission Systems) | Aerospace & defense | System only | AS9100, ISO 9001, IATF 16949, ISO/IEC 17025 | Supplier must keep a QMS to an industry standard BAE accepts (AS9100, ISO 9001:2015 or its latest revision, IATF 16949, Nadcap or ISO/IEC 17025). Approval is either by certification from a registrar accredited through an IAF-recognized body, or by a BAE Systems audit of a compliant QMS. The manual is incorporated by reference into BAE purchase orders. | Supplier Quality Assurance Manual (SQAM) 095870 (opens in a new tab) Rev 18, cover dated September 14, 2026 | Nov 10, 2026 |
| Bell Textron | Aerospace & defense | Certificate required | AS9100, AS9120, ISO 9001, ISO/IEC 17025 | Manufacturers of Bell part-numbered items must be registered to AS9100/EN9100/JISQ9100 by an accredited registrar and listed in OASIS. For non-Bell part-numbered items, compliance is enough. Distributors must comply with AS9120 (AS9100 or AS9120 registration is evidence). Processors must comply with Nadcap AC7004 and hold Nadcap accreditation for processes Bell Engineering defines. Test labs may instead hold ISO 17025 accreditation through an ILAC signatory. Tooling suppliers for Bell program part numbers need AS9100 or ISO 9001 registration and OASIS listing. | Supplier Quality Program web page (minimum Bell Supplier Quality Requirements table; refers to SQRM-001) (opens in a new tab) Undated web page (copyright 2026) | Nov 9, 2026 |
| Textron Systems | Aerospace & defense | System only | ISO 9001, AS9100 | Seller 'should' implement a QMS that complies with ISO 9001, AS9100 or a system Textron Systems approves. No certificate is required. Textron Systems' Supplier Expectations Package (same supplier page) says it uses AS9100 as a benchmark and prefers a QMS in line with ISO 9001 or AS9100 when the supplier is not certified. | Supplier Quality Assurance Requirements (SQAR) QA-SP47 (opens in a new tab) Rev M (PDF dated February 2025) | Nov 9, 2026 |
| General Dynamics Ordnance and Tactical Systems (St. Petersburg, FL) | Aerospace & defense | Certificate required | ISO 9001 | Subcontractor must keep a QMS in accordance with the latest ISO 9001 or an equivalent; an alternate QMS needs written approval. It must also give GD-OTS a copy of its current QMS certification every year (deliverable S1-11), so in practice a certificate is needed even though the clause never says 'certified'. | Supplier Quality Clause S1, General Quality Clause Requirements (opens in a new tab) Revision 2, effective August 21, 2024 | Nov 9, 2026 |
| AM General | Aerospace & defense | Certificate required | ISO 9001, IATF 16949 | Suppliers must at minimum be certified to the current ISO 9001, with the long-term goal of IATF 16949. HMMWV component suppliers: ISO 9001:2015 registration by an accredited third-party registrar, or an AMG-approved plan to reach registration or compliance. JLTV component suppliers: certified to ISO 9001:2015, working toward IATF 16949 (stepwise options incl. second-party audits). Suppliers of goods with special characteristics must be ISO 9001:2015 or IATF 16949 registered by an accredited third party before delivering production-approved parts. | Supplier Quality Manual (opens in a new tab) Rev May 2025 (.docx; the current file on AM General's Supplier Resources page) | Nov 9, 2026 |
| Moog | Aerospace & defense | Certificate required | AS9100, ISO 9001, AS9120, AS9110, ISO/IEC 17025 | Documented QMS plus a minimum certification or accreditation by supplier type. Suppliers to Moog Aircraft Groups: AS9100. Suppliers to Space and Defense and Industrial groups: ISO 9001 or demonstrated equivalency. Distributors: AS9120, ASA-100, AS9100 or ISO 9001. COTS, tooling and raw-material makers: ISO 9001. Inspection, test and calibration labs: ISO/IEC 17025 accreditation (A2LA, NVLAP, ANAB etc.) or Nadcap. Maintenance: AS9100, AS9110 or Part 145. Special processors: Nadcap, AS9100 or ISO 9001. | Supplier Quality and Management System Requirements, SQR-1 (opens in a new tab) Revision 2.0 (PDF dated June 2026) | Nov 9, 2026 |
| Volvo Group (Volvo Trucks, Mack Trucks) | Automotive & commercial vehicles | Certificate required | IATF 16949, ISO 9001, ISO 14001, ISO/IEC 17025 | Suppliers to the truck brands must have a QMS approved by a third-party registrar to IATF 16949. Suppliers to other Volvo divisions need the same to ISO 9001. All supply partners must have an ISO 14001 environmental management system approved by a third-party registrar. All sub-tier suppliers must be third-party registered to ISO 9001. ISO/IEC 17025 compliance is mandatory for labs of suppliers delivering electrical/electronic components (optional otherwise). | Supply Partner Quality Assurance Manual (SPQAM) (opens in a new tab) Sixth edition, 2022 (still the edition linked from Volvo Group's supplier requirements page) | Nov 9, 2026 |
| Volvo Cars | Automotive & commercial vehicles | Certification expected | ISO 9001, ISO 14001, IATF 16949 | Under an 'expect' heading, the page lists 'Be certified ISO 9001, ISO 14001, TS 16949.' It links no public requirement document; the detail is behind the supplier login. | Supplier portal page ('We expect our suppliers to meet our requirements for responsible business') (opens in a new tab) Undated web page | Nov 9, 2026 |
| Nissan | Automotive & commercial vehicles | System only | ISO 14001 | Nissan asks suppliers to run ISO 14001 or an equivalent environmental management system. Suppliers without one are required to establish one. No certificate is demanded. This is Nissan's environmental document, not its quality manual (the quality requirements are not public). | Nissan Green Purchasing Guidelines (opens in a new tab) July 2026 (revision [14], 2026.07.31) | Nov 9, 2026 |
| Lear Corporation | Automotive & commercial vehicles | Certificate required | IATF 16949, ISO 9001, ISO 14001, ISO 45001 | Every approved production supplier location needs third-party registration to ISO 9001 and IATF 16949. ISO 9001 alone may be accepted, with written Lear approval, where IATF 16949 does not apply or as an interim step. The ISO 9001 certificate must carry the mark of an IAF MLA accreditation body. Environmental requirements depend on size: suppliers with more than 500 employees need third-party ISO 14001 certification; more than 250, an ISO-based EMS plus a legal compliance evaluation; more than 50, a basic EMS; fewer than 50, an environmental policy. Health and safety should be managed 'preferably' under a certified ISO 45001 system. | Global Requirements Manual and Code of Conduct for Suppliers (opens in a new tab) Updated July 2024, amended October 2024 (public version linked from lear.com/suppliers/supplier-requirements) | Nov 9, 2026 |
| Dana Incorporated | Automotive & commercial vehicles | Certificate required | IATF 16949, ISO 9001 | All suppliers must achieve and maintain IATF 16949 or ISO 9001 certification and show it in their Dana 1 Source profile, along with the relevant AIAG CQI self-assessments (CQI-9 heat treat, CQI-11 plating, CQI-15 welding, CQI-17 soldering, CQI-27 casting, CQI-29 brazing). | Dana's Supplier Quality and Development Manual (DCN CORPM00016/2) (opens in a new tab) 20-Aug-2025 | Nov 9, 2026 |
| BorgWarner | Automotive & commercial vehicles | Certification expected | ISO 9001, IATF 16949, ISO 14001 | BorgWarner 'seeks' suppliers who hold at least ISO 9001 and will achieve IATF 16949, and 'seeks' suppliers with ISO 14001 or a comparable registered EMS. Suppliers are 'expected to work in accordance with' ISO 9001 and toward IATF 16949. Changes in registration status must be reported in the procurement portal. | BorgWarner Supplier Manual (opens in a new tab) Rev. Date May 1, 2025 | Nov 9, 2026 |
| Allison Transmission | Automotive & commercial vehicles | Certificate required | IATF 16949, ISO 9001 | Unless Allison grants an exemption, all suppliers of on-highway products and services must be certified to IATF 16949. Suppliers of off-highway, service-only and regional value-added-services parts must be certified to at least ISO 9001. A copy of the certificate goes to Allison. | Global Supplier Quality Manual (opens in a new tab) Fifth Edition, November 2026 | Nov 9, 2026 |
| Oshkosh Corporation | Automotive & commercial vehicles | Certification expected | ISO 9001, IATF 16949 | All suppliers are 'expected' to be ISO 9001, ISO/TS 16949 or IATF 16949 registered by an accredited third-party registrar, and not meeting this 'may have an impact on future business'. The manual separates Requirements (mandatory) from Expectations ('should'). | Global Supplier Quality Manual (opens in a new tab) Edition 7.0 (last revision-history entry 3/31/2023; PDF re-issued August 2026) | Nov 9, 2026 |
| Eaton | Industrial & electrical | Certificate required | AS9100, ISO 9001, IATF 16949, AS9120, AS9110 | Suppliers must keep current certification by a third-party registrar to the QMS standard of the Eaton group they supply: Aerospace AS/EN/JISQ 9100 (distributors AS9120, maintenance organizations AS9110); Electrical ISO 9001; Filtration ISO 9001; Mobility IATF 16949; Mobility Aftermarket ISO 9001. Eaton may require more certifications, special-process certifications or sub-tier certifications for specific businesses or customers. A change in certification status must be reported within 24 hours. | Eaton Global Supplier Excellence Manual (opens in a new tab) Revision 22, September 1, 2026 | Nov 10, 2026 |
| The Timken Company | Industrial & electrical | System only | ISO 9001, AS9100, IATF 16949, ISO 14001 | At minimum, suppliers must conform to ISO 9001, AS9100D, IATF 16949 or AS13100, and 'may be required' to obtain registration. Suppliers without the resources for a QMS are audited on site by Timken. ISO 14001 is encouraged and registration or conformance 'may be required'. | Supplier Requirements Manual (Timken Corporate Standard 29.1) (opens in a new tab) Revision 15, July 2026 | Nov 9, 2026 |
| Generac | Industrial & electrical | Certificate required | ISO 9001 | 'Generac mandates ISO9001 certification as the minimum expectation for direct material suppliers, factories, and subcontractors.' The next sentence only requires conformance to ISO 9001 or an equivalent standard. Suppliers must provide their latest valid certificate on request. | Supplier Handbook (opens in a new tab) Undated (PDF created February 2025; linked from generac.com supplier support page) | Nov 9, 2026 |
| Snap-on | Industrial & electrical | Certification expected | ISO 9001, ISO/IEC 17025 | Snap-on 'encourages' suppliers to become compliant with and certified to ISO 9001, and expects a sound quality system. Independent laboratories used for inspection, test or calibration must be accredited to ISO/IEC 17025 or equivalent national requirements. | Snap-on Supplier Quality Manual (SSQM) (opens in a new tab) Revision B, 4/3/2020 (still the file linked from snapon.com/EN/Suppliers) | Nov 9, 2026 |
| Xylem | Industrial & electrical | System only | ISO 9001, ISO 14001, ISO 45001 | Xylem expects suppliers to have a QMS in compliance with ISO 9001:2015 or an equivalent standard. Evidence of environmental commitment 'may include' an ISO 14001 (or equivalent) EMS. ISO 45001 compliance is 'preferred'. No certificate required. | Supplier Quality Manual (opens in a new tab) Revision 05, 5/13/2024 | Nov 9, 2026 |
| Lennox International | Building products & HVAC | System only | ISO 9001 | To qualify, suppliers must have a quality system that complies with ISO 9001:2015, complete a self-evaluation and pass Lennox's on-site assessment. Third-party certification is 'encouraged' and 'may be required'. When certified, suppliers must report status changes within 5 business days. | Supplier Qualification and Development Guidelines (opens in a new tab) Revision 2023 (April 2023; still the file linked from lennox.com/suppliers) | Nov 9, 2026 |
| Honeywell (Building Automation) | Building products & HVAC | System only | ISO 9001, IATF 16949, AS9100 | SPOC 100: suppliers must keep a documented QMS that conforms to ISO 9001 at minimum. Suppliers of safety-critical or high-risk components must hold certification to IATF 16949, AS9100 or equivalent. This covers Honeywell Building Automation only, not Honeywell Aerospace. | Honeywell Building Automation Supplemental Purchase Order Conditions (SPOC) Manual, SPOC 100-113 (opens in a new tab) Version 2026, Revision 01/2026, dated 28 January 2026 | Nov 9, 2026 |
| Otis Worldwide | Building products & HVAC | Certificate required | ISO 9001, AS9100, IATF 16949, ISO 14001, ISO 45001 | Suppliers must keep a quality system that meets or exceeds ISO 9001, AS9100, IATF 16949 or VDA 6.1 and is certified by an accredited third-party certification body. Otis 'encourages' EHS systems complying with ISO 14001 and ISO 45001 but at minimum requires its own EHS requirements. | Supplier Quality Manual (opens in a new tab) Effective 1 November 2022 (still the manual linked from otis.com suppliers page) | Nov 9, 2026 |
| Shaw Industries | Building products & HVAC | System only | ISO 14001 | Shaw expects suppliers to keep a QMS 'suitable to the products provided' (no standard named) and 'encourages' an EMS such as ISO 14001. All suppliers must follow the Sustainable Sourcing Policy. Raw-material and sourced-product suppliers must comply with Shaw's material disclosure requirements. | Sustainable Sourcing Policy and Supplier Code of Conduct (opens in a new tab) Undated (PDF March 2026; linked from shawinc.com/current-suppliers) | Nov 9, 2026 |
| Keysight Technologies | Electronics & semiconductors | System only | ISO 9001 | All suppliers must conform at minimum to the ISO 9001 QMS requirements. No certificate is required. | Supplier Quality System Requirements (Doc# 5951-1665-1) (opens in a new tab) Effective 9 September 2019, last updated 1 November 2026 | Nov 9, 2026 |
| Micron Technology | Electronics & semiconductors | Certificate required | ISO 9001, IATF 16949, ISO/IEC 17025 | Suppliers of materials, equipment and services that affect production must hold at least ISO 9001:2015 certification, issued by a body carrying an IAF MLA accreditation mark. Automotive-relevant suppliers progress toward IATF 16949 (certified ISO 9001 plus customer requirements, then second-party IATF audits, then IATF 16949 certification). All calibration and lab-service suppliers must be accredited to ISO/IEC 17025 unless a waiver is documented. | Micron Supplier Requirements Standard (SRS) (opens in a new tab) Revision 17.0 (PDF October 2026; micron.com URL redirects to the assets.micron.com copy linked from micron.com/about/company/suppliers) | Nov 10, 2026 |
| Stryker | Medical devices | System only | ISO 13485 | Suppliers are expected to keep an effective QMS that complies with 'the latest applicable ISO requirements'. ISO 13485 is not named as a supplier requirement. Approval is risk-based and may include an audit, quality and change-control agreements, and ISO certificates or FDA registration. Suppliers provide evidence of certifications on request. | Supplier Quality Guidebook (PRT-GSNPS-OTHD-1372150) (opens in a new tab) Version AC (D0000203386; PDF November 2024; linked from Stryker's Global Quality page) | Nov 9, 2026 |
Documents marked confidential, proprietary, restricted or sensitive were deliberately left out, even where a copy can be found online. Some well-known manufacturers are missing because we could not find a current public supplier document from the company itself; their requirements sit behind supplier portals. Requirements are described in our own words; quotations are from the companies' documents, never from ISO or SAE standards.
How to read your own customer's requirements
- Start with the purchase order. Find the quality clause, the quality notes or the supplier manual the PO or contract invokes, with its revision. That, not the customer's website, is what you are bound to, and several of these documents say the PO wins when the two conflict.
- Get the exact document and revision. Download it from the customer's supplier page or portal and check the revision date against the one the PO cites. Manuals are revised; an old copy in a shared folder is a common source of wrong answers.
- Find your supplier type. Production, distributor, repair station, tooling, raw material, special process, calibration or test laboratory: each can carry a different minimum. Read the section that applies to you, not the first one.
- Read the verbs and the proof asked for. Shall or must with a third-party certificate is a requirement. Should, expects or encourages is an expectation. Watch for conditions on the certificate itself: an accredited certification body, an accreditation mark, listing in the IAQG OASIS database.
- List what follows from it. Deadlines to report a change in certification status, documents to upload each year, requirements you must flow down to your own suppliers, and which edition of the standard the clause names. Put anything unclear to your customer's supplier quality contact in writing.
Before you accept a certificate from your own supplier, check it: our guide on how to verify an ISO certificate shows how. If the clause names ISO 9001:2015 or ISO 14001:2015, our transition deadline calculator gives the date your own certificate has to move to the 2026 edition.
When a customer asks for a certificate you do not have
We help manufacturers build and certify the systems their customers ask for: ISO 9001, AS9100 and ISO 14001. If you are deciding between the first two, start with AS9100 vs ISO 9001, clause by clause. To talk through a customer's clause, get in touch; that first conversation is free.
Common questions
Do major manufacturers require ISO 9001 certification from suppliers?
Often, but not always in writing. Of the 32 public supplier documents we read, 15 require a third-party certificate for the main production supplier, 4 state certification as an expectation, and 13 ask only for a system that conforms to a standard. ISO 9001 is named in 27 of them. Your purchase order decides which clause applies to you.
Does every aerospace customer require AS9100?
No. Boeing requires 9100-series certification for production suppliers, listed in the IAQG OASIS database, with AS9120 for distributors and AS9110 for repair stations. Lockheed Martin Aeronautics accepts third-party ISO 9001 for production parts outside the F-35 program. Raytheon accepts its own audit as an alternative to a certificate. Read the tier that matches your supplier type.
Do customers require ISO 14001 certification?
Rarely as a firm rule. 9 of the 32 documents name ISO 14001. Volvo Group requires a third-party certified ISO 14001 system from every supply partner, and Lear requires certification from suppliers with more than 500 employees. Others, such as Nissan, Xylem, Otis and Shaw, ask for or encourage an environmental management system without requiring a certificate.
Our customer's manual names ISO 9001:2015. What happens with the 2026 edition?
Accredited ISO 9001:2015 certifications are not valid after September 30, 2029, under Global ACI-TECH-3-TR, and from March 31, 2028, new and initial certifications are issued to ISO 9001:2026 only. Supplier manuals often lag a revision: several in this table still name ISO/TS 16949, which IATF 16949 replaced. Ask your customer's supplier quality contact to confirm in writing that a certificate to the 2026 edition meets the clause.
Do medical device manufacturers require ISO 13485 from suppliers?
Not in the public document we read. Stryker's supplier guidebook asks for a quality management system that meets the applicable ISO requirements and governs the detail through quality agreements, change-control agreements and purchase order terms; it does not name ISO 13485 as a supplier requirement. Your quality agreement is the document to read.
How do customers check our certificate?
The documents ask for a copy of the certificate, an upload to the customer's supplier portal, or, in aerospace, listing in the IAQG OASIS database. Several also set deadlines for reporting a change in certification status: Eaton within 24 hours, Lennox within 5 business days, Blue Origin within 3 business days of a suspension. Keep your certificate current in every portal you are registered in.
Method
Each document was downloaded from the company's own site, or from the file its supplier page links to, and read in full. The revision and date come from the document itself; where a document is undated, the revision column says so. Every row was verified on November 9, 2026. Certification bodies, consultancies and software vendors were not used as sources.
Changelog
- 2026-11-10 — Re-checked the BAE Systems, Eaton and Micron documents at the companies' own sites. Eaton's manual is now Revision 22 (September 1, 2026): updated the row and link, adding Mobility Aftermarket (ISO 9001), AS9120 for aerospace distributors, AS9110 for maintenance organizations and the new counterfeit parts plan. Clarified that BAE accepts ISO 9001:2015 or its latest revision.
- 2026-11-09 — Published. 32 supplier documents from major manufacturers, each read in full from the company's own site on November 9, 2026, and sorted into three levels.