comparison
AS9100 vs ISO 9001: Clause-by-Clause Comparison
Sooner or later, every shop that grows into aerospace work hears a buyer ask: “Are you AS9100 certified?” If you already hold ISO 9001, the next question is yours. How different is AS9100, and do we need it?
The short answer: AS9100D contains ISO 9001:2015 in full and adds an aerospace layer on top. Whether you need that layer is decided by your customers’ purchase orders, not by your industry. If you hold ISO 9001 today, you already have most of the structure. The work is in the layer.
The two side by side
| ISO 9001 | AS9100 | |
|---|---|---|
| Who it is for | Any organization, in any industry | Organizations that design or produce aviation, space and defense products |
| What it contains | Quality management requirements | All of ISO 9001:2015, plus aviation, space and defense requirements |
| Who certifies it | Any accredited certification body | Certification bodies inside the IAQG certification scheme, using auditors authenticated for aerospace audits |
| Where your certificate shows up | IAF CertSearch, where accredited certification bodies upload certificates, and your certification body’s own register | OASIS, the IAQG database aerospace customers use to check suppliers |
| Related standards | Many sector versions | AS9120 for distributors, AS9110 for maintenance organizations |
The certification route is the part people underestimate. An AS9100 certificate is issued under the IAQG certification scheme, defined in IAQG’s 9104 series of standards. The certification body must be accredited and approved to work in that scheme, and its auditors must go through IAQG’s authentication process. Once you are certified, your audit results are reported in OASIS, and that is where many aerospace buyers check a supplier before they place an order.
What AS9100 adds to ISO 9001
These are the parts of AS9100D that ISO 9001 does not ask for. Each one exists because of a real failure mode in aerospace supply chains.
- Operational risk management. A planned process for managing the risks to meeting product and customer requirements, beyond the risks and opportunities ISO 9001 already asks you to address.
- Configuration management. Control of the product’s configuration through its life, so the part you make matches the revision the customer approved.
- Product safety. Processes to assure product safety throughout the product’s life.
- Counterfeit part prevention. Buying from original or authorized sources, traceability, verification, and quarantine and reporting of suspect parts. For electronics suppliers, this is often the heaviest clause.
- Foreign object debris (FOD) prevention. Keeping debris out of the product, which matters most in assembly and in shops that work on or near aircraft structures.
- Special process controls. ISO 9001 already requires you to validate processes whose output cannot be fully checked afterwards. AS9100 adds specific controls for special processes such as heat treating, chemical processing and nondestructive testing. Many customers also require Nadcap accreditation for these, which is a separate program.
- Production process verification. First article inspection is the usual method. The standard does not require a particular report format, but many customers specify AS9102.
- Delivery performance. On-time delivery is measured as part of customer satisfaction, and auditors look at the numbers.
- Awareness of ethics and product safety. People must know how their work contributes to product conformity and safety, and why ethical behavior matters.
- Flow-down to your own suppliers. Your customers’ requirements have to reach your sub-tier suppliers, and your purchase orders have to show it.
None of this replaces ISO 9001. It sits on the same structure: the same clauses, the same internal audits, the same management review.
Clause-by-clause comparison matrix
AS9100D keeps ISO 9001:2015’s clause numbers and adds aerospace requirements inside them. The table shows where the additions sit, in our own words and by clause number only; SAE and ISO copyright the text, so read the standards themselves for the exact requirements. A dash means AS9100D adds nothing significant to that clause.
| Clause | ISO 9001:2015 covers | What AS9100D adds |
|---|---|---|
| 4 Context | Context, interested parties, scope, processes | 4.4: the system also addresses customer and statutory quality system requirements, and documented information describing the system, its scope, its processes and who is responsible for them |
| 5 Leadership | Leadership, policy, roles | 5.1.2: product conformity and on-time delivery are measured, and action is taken when targets are missed |
| 6 Planning | Risks and opportunities, objectives, changes | — (aerospace operational risk sits in 8.1.1) |
| 7 Support | Resources, competence, awareness, documented information | 7.1.5.2: a register of measuring equipment and a process to recall equipment that needs calibration or verification. 7.3: awareness of each person’s contribution to product conformity and safety, and of ethical behavior |
| 8.1 Operational planning | Planning and control of operations | 8.1.1 operational risk management, 8.1.2 configuration management, 8.1.3 product safety, 8.1.4 counterfeit part prevention, and control of work transferred between sites or to suppliers |
| 8.2 Requirements | Customer communication and requirements review | Identifying special requirements and the risks of meeting them before you accept an order |
| 8.3 Design | Design and development | Planning design in stages, verification and validation testing (8.3.4.1), and outputs that identify key characteristics and critical items |
| 8.4 External providers | Control of suppliers and outsourced processes | 8.4.1.1: a register of external providers with approval status and scope, and periodic review of their quality and delivery performance. 8.4.3: a longer list of requirements to flow down on purchase orders |
| 8.5 Production | Controlled conditions, identification, preservation, post-delivery, changes | 8.5.1.1 control of equipment, tools and software programs, 8.5.1.2 special process validation and control, 8.5.1.3 production process verification (first article). FOD prevention, acceptance authority media and configuration status (8.5.2), in-service data (8.5.5), and control of production process changes (8.5.6) |
| 8.6 Release | Release of products and services | Evidence of conformity that travels with the product where the customer or contract requires it |
| 8.7 Nonconforming outputs | Control of nonconforming outputs | Customer notification for nonconforming product already delivered, control of scrap until it is unusable, counterfeit and suspect parts treated as nonconforming |
| 9 Performance evaluation | Monitoring, customer satisfaction, internal audit, management review | 9.1.2: customer satisfaction information includes delivery performance, returns and corrective action requests |
| 10 Improvement | Nonconformity, corrective action, improvement | 10.2.1: corrective action flowed down to a supplier when the supplier caused the problem, human factors considered in root cause, and escalation when corrective actions are late or do not work |
The heaviest additions sit in clause 8. That is why an ISO 9001 shop that upgrades spends most of its time on operational risk, configuration management, supplier controls and first article inspection, not on its management system.
Which one do you need?
Start with your purchase orders, not the standard. The quality clause on a customer’s purchase order, or in its supplier quality manual, is what decides it.
- If it names AS9100, you need AS9100.
- If it names ISO 9001, that meets the requirement. AS9100 may still be worth it for the customers you want next, but it is a choice.
- If it names ISO 9001 or an equivalent quality management system, an AS9100 certificate generally satisfies it, because AS9100D contains every ISO 9001:2015 requirement. Confirm it in writing if the customer has moved its own requirement to ISO 9001:2026.
Some primes tier their supplier requirements, asking for ISO 9001 at the baseline tier and AS9100 only at the tiers above it. Read the clause before you buy a more expensive certificate than your customer asked for.
AS9100 vs AS9110 vs AS9120
The 9100 family has three standards, and each is for a different kind of business. All three contain ISO 9001 and are certified under the same IAQG scheme, with results in OASIS.
| AS9100D | AS9110C | AS9120B | |
|---|---|---|---|
| For | Organizations that design or make aviation, space and defense products | Maintenance, repair and overhaul organizations | Distributors and stockists that buy, split and resell parts without changing them |
| Emphasis | Design, production, special processes, first article, configuration | Maintenance work, airworthiness and the aviation maintenance regulations it sits alongside | Traceability, split lots, documentation that travels with the part, counterfeit prevention |
| Leaves out | Nothing from ISO 9001 | Manufacturing-specific requirements that do not apply to maintenance | Design and manufacturing requirements |
If you make parts, it is AS9100. If you only buy and resell them, it is usually AS9120. If you maintain aircraft or components, it is AS9110, which is outside our scope. All three are being revised as IA9100, IA9110 and IA9120; our IA9100 tracker follows the dates.
Upgrading from ISO 9001 to AS9100
If you hold ISO 9001, the upgrade is usually the shortest route to AS9100. You keep the system you have and add the aerospace layer.
- Flow-down review. Read the quality clauses your customers send, so the system answers them rather than a generic checklist.
- Gap analysis against AS9100D. Two to four weeks, starting from your existing system.
- Build the aerospace layer. Operational risk, configuration management, product safety, counterfeit parts, FOD, special process controls and first article inspection, built around how you already work.
- Run it, audit it and review it. An internal audit against AS9100D and a management review before the certification body arrives.
- Certification audits with a certification body in the IAQG scheme. Your ISO 9001 certification body may or may not be one, so check early.
Supplier control and flow-down are two of the most common sources of first-audit findings in an upgrade. Those are where the aerospace layer reaches outside your own building.
Timing: ISO 9001:2026 and IA9100
Two revisions are moving at different speeds.
- ISO 9001:2026 was published on September 16, 2026. Accredited ISO 9001:2015 certificates have to transition by September 30, 2029. Our transition tracker has every date.
- AS9100D is still built on ISO 9001:2015. Its next revision, renumbered IA9100, had no publication date or transition timeline from IAQG as of October 30, 2026. Our IA9100 tracker follows it.
For a while, the ISO 9001 text and the aerospace text will sit on different editions. If you hold both certificates, that affects which one moves first, and our Wichita ISO 9001 page walks through the choice. If your customer wants AS9100, do not wait for IA9100: purchase orders ask for AS9100 today, and a sound AS9100D system is what the revision will build on.
Quick answers
Is AS9100 harder than ISO 9001? It is ISO 9001 plus more requirements, so there is more to build and more to audit. For a shop already certified to ISO 9001, the extra work is concentrated in clause 8.
Can one system meet both? Yes. AS9100D contains every ISO 9001:2015 requirement, and many customers who ask for ISO 9001 accept an AS9100 certificate. Confirm it with the customer, especially while ISO 9001:2026 transitions are under way and AS9100D is still built on the 2015 edition.
Do we still need ISO 9001 if we get AS9100? Usually not as a separate certificate, unless a customer or contract names it specifically. Check the quality clause.
How long does the upgrade take? A gap analysis takes two to four weeks from an existing ISO 9001 system. The build and the records the auditor needs to see usually take a few months, depending on how much design, special process and supplier control is in scope.
Where this comes up most
In our two home markets the question arrives in different forms.
- In Wichita, it is usually airframes and aerostructures: machine shops, finishers and composites shops growing into aerospace programs. See our Wichita page.
- In Kansas City, it is more often avionics and electronics, where counterfeit part prevention does the heavy lifting. See our Kansas City AS9100 page.
If you are deciding between the two standards, send us the quality clause from your purchase order. We will tell you which one it asks for, and what the gap is from where you are today. Our AS9100 and ISO 9001 service pages describe how an engagement runs.
Choosing help for the move to AS9100? Our guide to choosing an AS9100 consultant lists the aerospace-specific questions to ask.