Skip to content

industry update

How Many US Companies Are ISO 9001 Certified?

The ISO Survey counts certificates, not companies, so the closest figure to the number of ISO 9001 certified US companies is a certificate count. At December 31, 2025, the US had 28,977 valid accredited ISO 9001 certificates covering 49,525 sites, ninth in the world, and that number grew 0.7% in a year when the worldwide total grew 9.3%.

The top 10 countries for ISO 9001 in 2025

RankCountryCertificatesSitesShare of world certificatesChange from 2024
1China673,4261,027,17441.8%+3.3%
2India139,303164,2558.6%+46.6%
3Italy92,459136,2795.7%-8.8%
4Germany52,40473,4053.3%+14.0%
5South Korea51,36255,9953.2%-0.6%
6United Kingdom46,09475,1192.9%+39.7%
7Japan46,01576,7572.9%+10.8%
8Spain41,91178,2812.6%+0.7%
9United States28,97749,5251.8%+0.7%
10Türkiye21,28826,2161.3%+45.9%
World1,611,7292,419,972+9.3%

The change column comes from ISO’s own 2024-2025 comparison. For every standard and country, see our ISO certification statistics page.

What the numbers say

1. 28,977 certificates is not 28,977 companies

A certificate is the document a certification body issues to an organization, and a site is a permanent location covered by it. The two do not map one to one, in either direction:

  • One certificate can cover several sites. US certificates cover 1.7 sites each on average, against 1.5 worldwide. A company with four plants may hold one multi-site certificate.
  • One company can hold several certificates. The same four-plant company may instead hold one certificate per plant, or separate certificates for separate divisions.
  • Only accredited certificates count. A certificate from a body outside the accreditation system is not in the survey, and neither is a certificate a participating body has not yet uploaded.

So the number of certified US organizations is lower than 28,977 wherever companies hold more than one certificate, and higher wherever certificates are missing from the data. The survey gives no way to net the two out. What it means for a buyer: a national count tells you nothing about one supplier. Check the supplier’s certificate itself, including its scope and sites. Our guide on how to verify an ISO certificate shows how.

2. The US is ninth and barely growing

The US added 194 ISO 9001 certificates in 2025, a gain of 0.7%. Worldwide, the count rose 9.3%, from 1,474,118 to 1,611,729. India grew 46.6% and Türkiye 45.9%. The US holds 1.8% of the world’s ISO 9001 certificates and 2.0% of the sites.

Not every jump abroad is new certification. The 2025 survey added data from UKAS CertCheck, which particularly fills in the United Kingdom, and new direct uploads from certification bodies accredited by Germany’s DAkkS. Part of the UK and German growth likely reflects better coverage rather than new certificates.

What it means for a US manufacturer: the counts grew fastest in India (+46.6%) and Türkiye (+45.9%), both common sourcing countries, while the US count was nearly flat. The survey does not say why. For a bid, what matters is whether the customer asks for the certificate, so check the purchase order and supplier requirements first. The federal acquisition rules name ISO 9001 first among the examples of higher-level quality standards that federal agencies can write into contracts.

3. A quarter of US sector entries are in health and social work

Only part of the certificates in the survey carry a sector, and one certificate can carry several, so the sector data counts sector entries, not certificates. US ISO 9001 certificates carry 12,917 sector entries. The eight largest:

  • Health and social work: 3,272 (25.3%)
  • Basic metal and fabricated metal products: 1,875 (14.5%)
  • Electrical and optical equipment: 1,301 (10.1%)
  • Machinery and equipment: 1,198 (9.3%)
  • Rubber and plastic products: 901 (7.0%)
  • Chemicals, chemical products and fibers: 783 (6.1%)
  • Wholesale and retail trade, and repairs: 495 (3.8%)
  • Engineering services: 466 (3.6%)

Worldwide, health and social work is 4.5% of ISO 9001 sector entries. In the US it is the largest single sector. Manufacturing sectors together, from food products through manufacturing not elsewhere classified, make up 57.7% of US entries.

What it means for a US buyer: 57.7% of US sector entries are in manufacturing, led by metalworking, electrical and machinery supply chains. Health and social work is the largest single sector, at more than five times its worldwide share. If you buy from or compete with fabrication, machining or healthcare-related suppliers, those are the certificates yours is compared with.

4. ISO 9001 is far ahead of ISO 14001 and ISO 45001 in the US

The other two most common management system standards are much thinner on the ground in the US:

  • ISO 14001 (environmental): 5,673 certificates covering 13,257 sites, 17th in the world, up 6.2% from 2024.
  • ISO 45001 (occupational health and safety): 2,451 certificates covering 5,490 sites, 21st in the world, up 1.0%.

For every five US ISO 9001 certificates there is about one ISO 14001 certificate (a ratio of 20%); worldwide the ratio is 46%. For ISO 45001 the US ratio is 8%, about one for every twelve, against 37% worldwide. ISO 14001 was the faster grower in the US in 2025, but both standards grew more slowly here than the worldwide totals of 9.3% for ISO 14001 and 10.5% for ISO 45001.

What it means for a US manufacturer: where a customer scores suppliers on environmental or safety management, an ISO 14001 or ISO 45001 certificate is rarer, and so it stands out more than ISO 9001 does.

For the 33-year picture (the US peaked at 44,883 ISO 9001 certificates in 2006, and its share of the world fell from 9.6% in 1999 to 1.8% in 2025), see US ISO certification trends, 1993-2025.

How to read these numbers

  • What is counted. Valid accredited certificates at December 31, 2025, issued by certification bodies accredited by members of Global Accreditation Cooperation Incorporated (Global ACI) and reported through IAF CertSearch, the global database of accredited management system certifications.
  • What is missing. Some certification bodies have not uploaded their data, so some certificates are not in the count. Certificates from unaccredited bodies are outside the survey altogether.
  • Coverage varies. It differs by country, industry and standard, so treat small differences between countries, and year-on-year jumps, with care.
  • Sector entries are not certificates. Many certificates carry no sector, and some carry several. The sector percentages describe the certificates that carry one.
  • Change figures come from ISO’s 2024-2025 comparison file. Ranks, shares, ratios and sector percentages are our calculations.

What to do with this

If your customers already require ISO 9001, these numbers do not change your decision. If they do not require it yet, the national count will not tell you whether they will. Ask your largest customers what their supplier requirements say, and look at whether the requests for quotes you are losing ask for a certificate.

Plan around the new edition. ISO 9001:2026 was published on September 16, 2026. Under Global ACI’s transition requirements:

  1. Until March 31, 2028, new and initial accredited certifications can still be issued to ISO 9001:2015. After that date, only to ISO 9001:2026.
  2. By September 30, 2029, organizations certified to ISO 9001:2015 must complete their transition. After that date, accredited ISO 9001:2015 certifications are no longer valid.
  3. The transition audit can be combined with a surveillance or recertification audit, or held as a separate audit.

If you are starting now, our guide to choosing ISO 9001:2015 or ISO 9001:2026 walks through which edition to certify to. For a company of 10 to 100 people, expect about three to four months from kickoff to the Stage 2 audit. Our ISO 9001 certification cost guide breaks down the budget, and our ISO 9001 service page describes how an engagement runs.

Questions

How many companies in the US are ISO 9001 certified?

There is no official count of companies. The ISO Survey counts 28,977 valid accredited ISO 9001 certificates in the US at December 31, 2025, covering 49,525 sites. Because one company can hold several certificates, and certificates from bodies that have not uploaded are missing, the number of certified companies is not the same figure.

Which country has the most ISO 9001 certificates?

China, with 673,426 certificates, 41.8% of the world total of 1,611,729. India is second with 139,303 and Italy third with 92,459. The US is ninth.

Is ISO 9001 certification growing in the US?

Slowly. US certificates rose 0.7% from 2024 to 2025, from 28,783 to 28,977, while the worldwide count rose 9.3%.

Is an ISO 9001:2015 certificate still valid now that ISO 9001:2026 is out?

Yes, for now. An accredited ISO 9001:2015 certificate stays valid until its own expiry date or September 30, 2029, whichever comes first. New 2015 certifications can be issued until March 31, 2028, though your certification body may set an earlier cutoff, so confirm the date with it.


Source: ISO Survey of Management System Standard Certifications 2025, via IAF CertSearch. Ranks, shares and per-sector percentages are our calculations.