Skip to content

industry update

ISO 13485 Statistics 2025: US Ranks Second

The United States holds 3,661 valid accredited ISO 13485 certificates, 10.0% of the 36,522 worldwide and second only to China’s 6,534. The US count grew 2.5% in 2025 while the world grew 17.0%, and under FDA’s Quality Management System Regulation, a certificate count still tells you nothing about any manufacturer’s regulatory status.

The top 10 countries for ISO 13485

RankCountryCertificates 2025Share of worldCertificates 2024ChangeChange %
1China6,53417.9%4,595+1,939+42.2%
2United States3,66110.0%3,573+88+2.5%
3India2,6197.2%1,976+643+32.5%
4Italy2,3276.4%2,438−111−4.6%
5Germany1,9135.2%2,209−296−13.4%
6South Korea1,5994.4%1,429+170+11.9%
7United Kingdom1,4884.1%1,157+331+28.6%
8France1,2513.4%1,470−219−14.9%
9Saudi Arabia9682.7%934+34+3.6%
10Chinese Taipei9462.6%789+157+19.9%
World36,522100%31,215+5,307+17.0%

Rank and share are our calculations from the 2025 country counts. The 2024 figures and the change columns are ISO’s own 2024-2025 comparison.

What the numbers say

1. The US is a large, established base, and its certificates cover more sites

The 3,661 US certificates cover 6,209 sites. That is about 1.7 sites per certificate, against about 1.4 worldwide (our calculation). That is an average, and a few large multi-site certificates can lift it, so check each supplier’s own site list rather than assuming.

For a buyer, that changes what you check. When a supplier shows you a certificate, the question is not just “is it valid?” but “does it cover the site that makes my part?” A certificate’s scope and site list answer that. A logo on a website does not. Our guide to verifying an ISO certificate walks through the check.

2. The world is growing much faster than the US

Worldwide, ISO 13485 certificates rose by 5,307 in ISO’s comparison, or 17.0%. The US added 88, or 2.5%, which is under 2% of the world’s increase (our calculation). China alone added 1,939, about 37% of the world’s growth, and India added 643. On ISO’s comparison figures, the US share slipped from 11.4% to 10.0% (our calculation).

What this means for a US device maker: the number of ISO 13485 certificates outside the US is growing quickly, especially in China and India. If you source offshore, expect more candidate suppliers to show an ISO 13485 certificate than a year ago. That raises the floor for a supplier pitch without proving anything about a given supplier. Your own supplier controls still have to do the qualifying.

Three large European markets moved the other way: Italy, Germany and France all recorded fewer certificates. Read that with the coverage notes below before treating it as a trend.

3. US sector entries cluster in electronics, plastics, pharmaceuticals and metals

Only part of the certificates in the survey carry a sector, and one certificate can carry several. The US has 943 ISO 13485 sector entries, against 3,661 certificates, so most US certificates carry no sector at all. Within those 943 entries (our percentages):

SectorUS sector entriesShare of entries
Electrical and optical equipment25827.4%
Rubber and plastic products18819.9%
Pharmaceuticals15416.3%
Manufacturing not elsewhere classified13514.3%
Basic metal and fabricated metal products10711.3%
Information technology596.3%

Rubber and plastics plus metal products make up 295 entries, or 31.3%. That is above the world mix, where the same two sectors make up 27.5% of 8,342 sector entries (our calculation). Electrical and optical equipment is the sector where electronics and instruments sit. Pharmaceuticals (16.3% of US entries against 11.0% worldwide) and manufacturing not elsewhere classified (14.3% against 5.4%) are where the US mix differs most (our calculations).

4. A certificate count is not a regulatory status

FDA’s Quality Management System Regulation (QMSR), in 21 CFR Part 820, became effective on February 2, 2026. It incorporates ISO 13485:2016 by reference. Where ISO 13485 conflicts with the Federal Food, Drug, and Cosmetic Act or FDA’s regulations, the Act and the regulations control.

That does not make the certificate a regulatory credential. FDA says it will not require certificates of conformance to ISO 13485, and that a certificate will not exempt a manufacturer from an FDA inspection. FDA inspections assess compliance with FDA regulations and are scheduled on risk factors. Since February 2, 2026, FDA inspects device manufacturers under compliance program 7382.850 and no longer uses the Quality System Inspection Technique (QSIT).

So the 3,661 figure counts valid accredited certificates reported to the survey at December 31, 2025. It is not a count of FDA-compliant manufacturers, and it is not a count of companies.

5. What the count does not tell suppliers and MDSAP candidates

Two points matter for anyone selling into US device makers.

  • Component suppliers. The QMSR states that it does not apply to manufacturers of components or parts of finished devices, though they are encouraged to consider its provisions. Accessories are different: FDA treats certain components, such as blood tubing and diagnostic x-ray components, as finished devices, and a manufacturer of accessories is subject to the QMSR. For a true component supplier, the ISO 13485 request usually arrives through a customer’s purchase order or supplier quality agreement, not through FDA.
  • MDSAP. The Medical Device Single Audit Program lets a recognized auditing organization run one regulatory audit for its member authorities: Australia’s TGA, Brazil’s ANVISA, Health Canada, Japan’s MHLW and PMDA, and the US FDA. FDA calls it voluntary and says it may accept MDSAP audit reports as a substitute for routine inspections. Firms with electronic product radiation control activities remain subject to FDA inspection for those activities.

For the long view (the US had the most ISO 13485 certificates in most years from 2004 to 2020, until China passed it in 2021), see US ISO certification trends, 1993-2025.

How to read these numbers

  • The survey counts valid accredited certificates at December 31, 2025.
  • The data comes from certification bodies accredited by members of Global Accreditation Cooperation Incorporated (Global ACI), through IAF CertSearch. Some certification bodies have not yet uploaded their data, so some certificates are missing. Coverage varies by country, industry and standard.
  • Certificates are not companies. One certificate can cover several sites, and one company can hold several certificates.
  • Sector figures are partial. Only some certificates carry a sector, and one certificate can carry several, so we call them sector entries.
  • Change figures are ISO’s own comparison of 2024 and 2025, using data from providers that took part in both years.
  • Country coverage shifts. The explanatory note says German coverage is still incomplete, and that IAF CertSearch data was supplemented with UKAS CertCheck statistics for a range of countries, particularly the United Kingdom. It also lists the standards for which China’s national accreditation body supplied register statistics, and ISO 13485 is not on that list. The survey does not separate coverage changes from certification activity, so read large moves in those countries with care.

What to do with this

  • If you make finished devices for the US market, treat QMSR compliance as the requirement and the certificate as a commercial and international tool. Decide which markets you sell in first. If they include several MDSAP member markets, an MDSAP audit may do more work than a standalone ISO 13485 certificate.
  • If you supply components, read your customers’ purchase orders and supplier quality agreements before you budget. Some will name ISO 13485, some will accept ISO 9001, and some will audit you themselves. Build to the clause you were sent.
  • If you buy from certified suppliers, check scope and sites on every certificate, and keep qualifying suppliers through your own controls. A rising global count makes certificates more common, not more meaningful.
  • If you are hiring help, our guide on how to choose an ISO 13485 consultant covers design controls, risk management and impartiality checks. Our ISO 13485 service describes how an engagement runs, and our ISO certification statistics page puts the medical device numbers next to the other standards.

Questions

How many companies in the US are ISO 13485 certified?

The survey does not count companies. It counts certificates: 3,661 valid accredited ISO 13485 certificates in the US at December 31, 2025, covering 6,209 sites. One company can hold several certificates, and one certificate can cover several sites, so the number of companies is not the same figure.

Which country has the most ISO 13485 certificates?

China, with 6,534 certificates, or 17.9% of the world total. The United States is second with 3,661 (10.0%), followed by India with 2,619 (7.2%). The top 10 countries together hold about 64% of all ISO 13485 certificates (our calculation).

Does the FDA require ISO 13485 certification?

No. Since February 2, 2026, the QMSR incorporates ISO 13485:2016 by reference, but FDA says it will not require ISO 13485 certificates, and a certificate does not exempt a manufacturer from FDA inspection. The certificate is something customers and other markets may ask for; FDA does not.

Do component suppliers need ISO 13485?

Not under FDA rules: the QMSR does not apply to manufacturers of components or parts of finished devices, although it encourages them to consider its provisions. Accessory makers are subject to the QMSR. In practice, a supplier’s need for ISO 13485 is set by its customers’ purchase orders and quality agreements.

Source: ISO Survey of Management System Standard Certifications 2025, via IAF CertSearch. Ranks, shares and per-sector percentages are our calculations.