Skip to content

Guide · ISO 13485 for medical devices

How to choose an ISO 13485 consultant, by what your device needs.

Generic hiring advice will not tell you whether a consultant can build a quality system that holds up with FDA, Health Canada and a notified body. Here is what to test, what to check, the red flags, and a scorecard for comparing candidates.

Last verified October 26, 2026

What they must know
FDA's QMSR, in effect since February 2, 2026, plus MDSAP for Canada and the EU MDR for Europe.
What to test hardest
Design controls and risk management, on a device like yours.
What they can't do
Certify you. And an accredited certification body may not consult.
What stays with you
The decisions: design reviews, risk acceptance, complaints, management review.

Start with your regulatory map

A device quality system is built to regulations, not just to the standard. Write down where you will sell and in what order, then ask each candidate what applies. Their answer should cover every row that fits your plan.

Market What applies What the consultant must know
United States FDA's Quality Management System Regulation (QMSR, 21 CFR Part 820), in effect since February 2, 2026. It incorporates ISO 13485:2016 by reference. The FDA additions: UDI (Part 830), medical device reporting (Part 803), device tracking where it applies (Part 821), advisory notices (Part 806), extra record content (820.35) and labeling controls (820.45). FDA now inspects under compliance program 7382.850, not QSIT.
Canada Class II, III and IV licenses need a quality system certificate from a Health Canada-recognized auditing organization. Only MDSAP certificates are accepted, since January 1, 2019. A standalone ISO 13485 certificate will not support a license. For Class III and IV, the certificate scope must include design.
MDSAP One audit recognized by Australia's TGA, Brazil's ANVISA, Health Canada, Japan's MHLW and PMDA, and the FDA. Voluntary in the US; Canada requires it for Class II to IV licenses. FDA may accept MDSAP audit reports in place of routine inspections, except for electronic product radiation control activities.
European Union The Medical Device Regulation (EU) 2017/745 requires a quality system proportionate to risk class and device type. EN ISO 13485:2016 is harmonized under it. Class IIa, IIb and III devices need a notified body. So do sterile, measuring and reusable surgical Class I devices, for the sterility, measuring or reuse aspects. Article 15 requires a person responsible for regulatory compliance.

One scope point catches component suppliers: the QMSR does not apply to makers of components or parts of finished devices, although FDA encourages them to consider it. Your customers may still require ISO 13485. For Canada in depth, see our guide to Health Canada licensing and MDSAP.

Certification is not compliance

Four different things often get treated as one:

  • FDA compliance is the law, checked by inspection. FDA will not require or issue an ISO 13485 certificate, and a certificate does not exempt you from inspection. FDA can now review your management reviews, internal audits and supplier audit reports.
  • An ISO 13485 certificate comes from an accredited certification body. It is voluntary in the US and often asked for by customers and distributors.
  • An MDSAP certificate comes from a recognized auditing organization. Canada requires it for Class II to IV licenses.
  • EU conformity assessment runs through a notified body for most classes and leads to CE marking.

Ask: which of these do we need, and which audit comes first? Our QMSR entry explains how the US rule and the standard now relate.

Design controls and risk management: the real test

Under the QMSR, the design and development requirements of ISO 13485 clause 7.3 apply to Class II and III devices and to some Class I devices, including those automated with software. Risk management runs alongside: ISO 14971:2019, confirmed current by ISO in 2025, is an FDA recognized consensus standard (5-125) and harmonized under the EU MDR. This is where a generalist shows the gap fastest. Three interview tests:

  1. Ask for a trace. Pick one user need and ask how it becomes design inputs, outputs, verification, validation and transfer, and where each record lives. Strong candidates use your product, not a template.
  2. Ask how risk flows. Risk controls should become design inputs, carry into production and be updated from complaints. A risk file written once is a finding waiting to happen.
  3. Ask about a design already underway. The right answer documents what exists with its real dates and controls the work from here. Backdated design reviews are never the answer; our design controls entry explains why reviewers notice.

Experience with your class and pathway

FDA sorts devices into Class I, II and III by risk, and class sets the route to market. Non-exempt Class I and II devices need a 510(k), most Class III devices need premarket approval (PMA), and De Novo classifies a new type of device with no predicate into Class I or II. Each route weighs the design record differently. Ask for experience that matches yours in specifics: class, pathway, and technology. Software, sterile products, implantables and IVDs each bring their own evidence. General ISO 9001 experience is useful, but it is not the same job.

Impartiality: who builds and who certifies

Accredited certification bodies work to ISO/IEC 17021-1. Its clause 5.2 gives you four checks:

  • The certifier does not consult. Its auditors can explain how the audit works, but they should not write or design any part of your system.
  • Two years apart. Ask whether anyone linked to the certification body has advised on your system. If so, that body should wait at least two years after the advice ends before certifying it.
  • No consultancy auditors. Ask who will audit you. The certification body cannot hand your audit to a consulting firm.
  • No bundles. Treat any offer that packages consulting and a certificate as a warning sign. The two should come from unrelated organizations.

You choose the certification body or MDSAP auditing organization, and you check its accreditation or recognition yourself. Our guide to verifying an ISO certificate shows how.

Credentials you can check

No credential proves someone can build your system, but some prove knowledge and experience, and some take minutes to verify.

Credential What it shows How to check it
ASQ Certified Medical Device Auditor (CMDA, formerly CBA) A passed exam plus five years of relevant experience (a degree can waive part), one of them in a decision-making role. ASQ's certification registry. Active holders only; holders can opt out, and EU residents must opt in.
RAPS RAC-Devices Medical device regulatory affairs knowledge, not quality system auditing. The holder's digital badge, or RAPS's credential holder directory.
Exemplar Global certified auditor A current personnel certification in an auditing scheme. Exemplar Global's Register of Certified Personnel.
"Lead auditor" course certificate A training course completed. Not a personnel certification. Exemplar Global's Training Certificate Verification Directory, for its certified training providers.

Claims such as "former MDSAP auditor" are hard to check from outside. Ask for the device types, the years and the role.

Questions to ask before you sign

  1. Who will do the work? Meet that person, not only the sales lead.
  2. How will you size the system to a company of our size and stage?
  3. How will our design history be built from here, and by whom?
  4. How do you handle the FDA additions to ISO 13485: UDI, reporting, advisory notices, complaint records, labeling?
  5. What is your role during an FDA inspection? Inspectors talk to your people, so expect preparation and response support.
  6. What will we own and run ourselves at the end?

Red flags

  • Guarantees of a certificate, a clearance or a clean inspection. The certification body, the auditing organization or FDA decides.
  • Templates sold as a system. A generic manual with your name on it will not match how your engineers design or your floor builds, and auditors test what people actually do.
  • Timelines that skip design history. Design records written at the end, or reviews reconstructed after the fact.
  • One bill for consulting and the certificate. Check who issues the certificate and who accredits them.
  • No mention of MDSAP when Canada is in your plan.
  • A consultant who wants to stay your quality department.

How engagements are usually structured

  1. Scope and regulatory strategy. Devices, classes, markets, sites, and the order of audits.
  2. Gap analysis. Usually fixed price, ending in a prioritized plan.
  3. Build. Design controls, risk management, supplier and production controls, CAPA, complaints and post-market surveillance, sized to you.
  4. Run it. Records accumulate, including an internal audit and a management review before the certification audit.
  5. Certification or MDSAP audit, and closing any findings.
  6. Sustain. Surveillance audits, design changes, complaint trending and inspection readiness.

Some companies buy only a part, such as design control coaching or MDSAP readiness. Duration depends on device complexity and starting point, so expect a timeline after the gap analysis, not before. Our guide to how ISO consultants work covers fee structures.

What you must own internally

  • Top management: quality policy, objectives, resources and management review.
  • A named quality lead on your payroll, with authority to run the system day to day.
  • Your engineers: design inputs, reviews, verification and validation.
  • Risk acceptance: whether residual risk is acceptable is your decision.
  • Reporting: whether a complaint meets FDA's medical device reporting criteria.
  • Suppliers: approval and monitoring.
  • For the EU, a person responsible for regulatory compliance, in house or, for micro and small companies, permanently available to you.

A scorecard for comparing consultants

Score each candidate 0 (weak or no answer), 1 (partial) or 2 (strong) on each line. A 0 on design controls, risk management or impartiality rules a candidate out, whatever the total. Skip the design controls line only if you carry no design responsibility.

Area Ask A strong answer Score
Regulatory map What applies to our device in each market, and in what order? QMSR, MDSAP for Canada, MDR for the EU, sequenced to your launch plan. 0 / 1 / 2
Design controls Trace one user need through inputs, verification, validation and transfer. Uses your device, with records made as the work happens. 0 / 1 / 2
Risk management How does ISO 14971 connect to design, production and complaints? One risk file that feeds design and is updated from the field. 0 / 1 / 2
Class and pathway Which devices like ours have you worked on? Same class, pathway and technology, described in specifics. 0 / 1 / 2
Certification vs compliance What does a certificate do for us with FDA? FDA does not require one, and it does not exempt you from inspection. 0 / 1 / 2
Impartiality Who chooses the certification body? You do, from an accredited body with no link to the consultant. 0 / 1 / 2
Credentials Which credentials do you hold, and where can we check them? Named credentials on the issuer's register. 0 / 1 / 2
Ownership What will our people run without you? Documents, decisions and internal audits, with the team trained to keep them going. 0 / 1 / 2

Want us on your scorecard?

Bring your device, its class and your markets. We will tell you which regulations and audits apply, in what order, and what a gap analysis would cover. We work with device companies across the US and Canada, on site and remotely. Start the conversation.

Common questions

What does an ISO 13485 consultant do?

Helps a device company build a quality system that meets ISO 13485:2016 and the regulations of its markets, then prepares the team for its certification or MDSAP audit and for FDA inspection: scope, gap analysis, design controls, risk management, supplier controls, CAPA and complaint handling, training. The consultant does not certify you.

Does the FDA require ISO 13485 certification?

No. Since February 2, 2026, the QMSR incorporates ISO 13485:2016 by reference, so you must comply with its requirements. FDA says it will not require or issue ISO 13485 certificates, and a certificate does not exempt a manufacturer from inspection. Many US device makers certify anyway because customers and other markets ask for it.

Do I need MDSAP to sell medical devices in Canada?

For Class II, III and IV devices, yes. The license needs a quality system certificate from a Health Canada-recognized auditing organization, and only MDSAP certificates have been accepted since January 1, 2019. A standalone ISO 13485 certificate does not qualify. Class I devices carry no regulatory quality system requirement.

Can our certification body help build our quality system?

No. Under ISO/IEC 17021-1, an accredited certification body may not provide management system consultancy. If a related body consulted on your system, it may not certify that system until two years after the consultancy ends. It can still explain its audit process.

What qualifications should an ISO 13485 consultant have?

Experience with your device class and pathway, and with design controls and ISO 14971 risk management on real products. Credentials help when you can check them: ASQ's CMDA can be checked in ASQ's registry (active holders who have not opted out), and RAPS's RAC-Devices verifies through a digital badge. A lead auditor course certificate shows training, not a current certification.

How much does an ISO 13485 consultant cost?

It depends on scope: devices, class, sites, markets, whether you design or only manufacture, and how much of the system exists. Most engagements start with a fixed-price gap analysis. The certification body or MDSAP auditing organization bills its audit fees separately.

Related

Sources

Changelog

  • 2026-10-26 — Published. Checked against FDA (QMSR FAQ, 21 CFR Part 820, MDSAP, device classification), Health Canada (MDSAP notice, GD207, license guidance), the EU MDR and harmonized standards list, ISO/IEC 17021-1:2015 clause 5.2, and ASQ, RAPS and Exemplar Global.