Tracker · updated as this changes
IA9100: what IAQG has confirmed, and what it hasn't.
AS9100 is being revised and renumbered IA9100. As of November 9, 2026, IAQG has not published the new standard, a release date or a transition deadline. Its October 12–15, 2026, meetings produced no IA9100 announcement; on October 20 it signed an endorsed-scheme agreement with Global ACI, which does not change any AS9100D certificate. Most dates quoted online are estimates. Here is the primary record, and what it means if you hold AS9100D today.
Last verified November 9, 2026
Status at a glance
| Question | Status |
|---|---|
| Is AS9100 being renamed? | Yes. Its next revision will be numbered IA9100. |
| Has IA9100 been published? | No. IAQG's published standards page lists no IA9100, and neither IAQG nor SAE International has issued a publication notice. |
| Is there a confirmed release date? | No. IAQG planned 2026. NASA's April 2024 report estimated the fourth quarter of 2026. |
| Is there a transition deadline? | No. IAQG has not published one. |
| Is an AS9100D certificate still valid? | Yes. Nothing published so far changes it. |
| Are AS9110 and AS9120 changing too? | Yes, as IA9110 and IA9120, on the same series schedule. No dates published. |
| Has ISO 9001:2026 been published? | Yes, on September 16, 2026. AS9100 is built on ISO 9001, so the aerospace revision follows it. |
How we got here
- September 2016. The current edition, AS9100D, is published. IAQG set the transition deadline for the 2016 series at September 15, 2018, about two years later.
- Third quarter of 2021. IAQG begins work on the next revision, originally aiming for a 2024 release.
- November 2023. The first draft goes out for comment. IAQG's key change summary plans publication for 2026, in step with the ISO 9001 revision.
- February 2024. IAQG publishes IA9137, its first standard under the new "IA" (International Aerospace) designation. Standards that carry AS, EN, SJAC or JISQ designations move to it when they are next revised.
- April 2024. NASA's Office of Safety and Mission Assurance reports 388 consolidated comments on the draft and says this pushes the publication estimate to the fourth quarter of 2026.
- June 2024. IAQG's IA9120 summary schedules a ballot on 9110 and 9120 for the fourth quarter of 2024 and publication of the whole IA9100 series in 2026.
- September 16, 2026. ISO 9001:2026 is published.
- October 20, 2026. Global ACI and IAQG sign an Endorsed Scheme Agreement. The IAQG certification scheme for 9100, 9110 and 9120 becomes a sub-scope of the Global ACI recognition arrangement, and IAQG will work only with accreditation bodies that are signatories to it. The agreement puts the scheme at around 24,000 certificates, issued by more than 85 certification bodies under 13 accreditation bodies.
- November 9, 2026. No IA9100 publication, release date or transition deadline from IAQG.
What the draft says will change
This comes from IAQG's own key change summary for the November 2023 draft. Drafts change before publication, so read it as direction, not as requirements.
- Quality culture and ethics. Leadership promotes an ethical work environment and sets goals that support a culture of quality.
- Information security. A new requirement to protect the quality management system and its information.
- Foreign object debris. Operations must prevent, detect and mitigate FOD risks.
- Product safety and counterfeit parts. Both are already AS9100D clauses. Notes under them become requirements.
- External providers. The clause is restructured for direct and sub-tier control, and a note allows remote inspection and audit of suppliers.
- Production process verification. Restructured to make clear it is more than first article inspection.
- Performance evaluation. Reviewing performance indicators becomes a requirement, and the audit program must take risk into account.
- Improvement. A note on planning periodic maturity assessments of the quality system.
For distributors, IAQG's June 2024 IA9120 summary adds expanded requirements on counterfeit and suspected unapproved parts, clearer traceability requirements, and the same information security requirement across the series.
The dates you will see elsewhere
- "Fourth quarter of 2026." NASA's April 2024 estimate, based on IAQG's schedule at the time. An estimate, not a commitment.
- "Early 2027." Appears in recent industry articles. IAQG has published no such date.
- "A two- or three-year transition." An expectation. The 2016 revision allowed about two years, but IAQG has published nothing for IA9100.
When IAQG publishes the standard or its transition rules, this page will carry the dates and the document they come from.
What to do now
- Keep working to AS9100D. It is what your customers' purchase orders require and what certification bodies audit today.
- Do the low-regret work early. Protecting quality records, FOD prevention and sub-tier supplier control are worth tightening under AS9100D anyway.
- Do not rebuild your system on a draft. Wait for the published text before rewriting procedures.
- Watch your customers' flow-down. A customer can set its own expectations for when suppliers move, separate from the certification deadline.
If you are building or upgrading an AS9100 system now, see our AS9100 consulting. Moving up from ISO 9001? Our AS9100 vs ISO 9001 comparison shows what the aerospace layer adds, clause by clause. Want an independent check of your AS9100D system before your next audit? See internal audits. Aerospace suppliers can also read our Wichita and Kansas City AS9100 pages.
Free tools and downloads
- ISO 9001:2026 gap analysis checklist88 clause-by-clause checks with the 2026 changes marked; free Excel and PDF workbook.
- AS9100 internal audit toolkit102 AS9100D checks with the 51 aerospace additions marked, plus a process audit sheet.
- What 32 major manufacturers require of suppliersWhich customers require a certificate, which only expect one, and which ask for a system.
Common questions
When will IA9100 be released?
IAQG has not published a release date. Its November 2023 key change summary planned publication for 2026, aligned with ISO 9001, and NASA's April 2024 status report put the estimate at the fourth quarter of 2026. ISO 9001:2026 was published on September 16, 2026. As of October 30, 2026, IAQG's published standards page lists no IA9100, and neither IAQG nor SAE International, its publisher, has issued a publication notice. Any specific date you see quoted elsewhere is an estimate.
Is there an AS9100 Rev E?
Not under that name. The revision of AS9100D that many people call "Rev E" is being published as IA9100: IAQG is renumbering the AS9100 series. It has not been published yet, so AS9100D is still the edition customers call for and certification bodies audit to.
Is AS9100 going away?
The requirements are not going away; the number is. AS9100's next revision will be published as IA9100. Until IAQG publishes it and sets a transition deadline, which it has not done, AS9100D certificates carry on as they are.
Will my AS9100D certificate stop being valid when IA9100 is published?
Not on the day it is published. Transitions run on a deadline set after a revision is issued, and IAQG has not published one for IA9100. For the last revision, the 2016 edition, the deadline was September 15, 2018, roughly two years after publication. Until IAQG publishes transition rules for IA9100, nothing changes for an AS9100D certificate.
Should we wait for IA9100 before getting certified?
No. Your customers' purchase orders call for AS9100 today, and certification bodies audit to AS9100D. A system built well to AS9100D is the foundation the revision will build on, and the draft changes IAQG has published are additions and clarifications, not a different system. Waiting usually means losing work you could have quoted.
Are AS9120 and AS9110 changing too?
Yes. They are being revised as IA9120 and IA9110. IAQG's June 2024 schedule showed a ballot on 9110 and 9120 in the fourth quarter of 2024 and publication of the whole IA9100 series in 2026. As with IA9100, no publication date or transition deadline has been published.
How big is the change?
Based on IAQG's own draft summary, it is an evolution rather than a rebuild. The draft adds information security for the quality system, strengthens foreign object debris prevention, turns notes on product safety and counterfeit part prevention into requirements, extends supplier control to sub-tiers, and adds emphasis on quality culture and ethical behavior. Drafts change before publication, so plan on the direction, not the wording.
Sources
- Global ACI–IAQG Endorsed Scheme Agreement, October 20, 2026 — the IAQG certification scheme as a sub-scope of the Global ACI arrangement; around 24,000 certificates, 85+ certification bodies, 13 accreditation bodies.
- IAQG, IA9100 key change summary, November 2023 — the draft changes, and publication planned for 2026 in alignment with ISO 9001.
- NASA Office of Safety and Mission Assurance, April 17, 2024 — the renumbering to IA9100, the development history, and the fourth-quarter 2026 estimate.
- IAQG and SAE International, February 2024 — IA9137, the first International Aerospace (IA) standard, and the move of existing designations at revision.
- IAQG, IA9120 key change summary, June 2024 — distributor changes and the series schedule.
- IAQG, "Transition Deadline Draws Near" — the September 15, 2018 deadline for the 2016 series.
- ANSI, September 16, 2026 — publication of ISO 9001:2026. Our ISO 9001:2026 tracker carries its transition dates.
If any of this has moved since we last checked, tell us and we will correct it the same day.