Skip to content

Toronto, Ontario

ISO consultants for Toronto device makers and manufacturers.

A Class II to IV device license in Canada needs a quality system certificate, and since 2019 Health Canada has accepted only one kind: MDSAP.

ISO certification consulting in Toronto at a glance

Who we are
Glocal Insight: senior ISO management system consultants working with Toronto companies on site and remotely. The consultant who scopes the work does the work.
Standards
ISO 9001, AS9100, ISO 14001, ISO 45001, ISO 27001, ISO 42001, ISO 13485, ISO 17025, plus internal audits, auditor training and ISO certification maintenance.
Typical timeline
For ISO 9001 at a company of 10 to 100 people, about three to four months from kickoff to the Stage 2 audit. Week by week.
Cost
A standalone gap analysis is typically in the low five figures; full implementation depends on scope. Certification body fees are separate. How certification costs are set, or estimate your audit days.
Track record
100% certification success. 100% of surveyed clients would recommend us.
Contact
(816) 535-0738 or start a conversation.

The certificate Health Canada accepts

The Toronto census metropolitan area has 9,902 manufacturing businesses with employees, 9,255 of them with 1 to 99 employees and 59 with 500 or more (Statistics Canada, Canadian Business Counts, June 2026). Inside that base sits a life sciences sector the City of Toronto counts at 30,490 jobs in the city in 2023, with medical instrument manufacturing and medical equipment and supplies manufacturing together accounting for 13.2% of them.

For the device makers in that sector, one Canadian rule decides what the first audit should be. A Class II, III or IV medical device needs a Health Canada license, the license application needs a quality management system certificate, and since January 1, 2019, Health Canada has accepted only certificates issued under the Medical Device Single Audit Program (MDSAP).

So the question to settle first is not whether to pursue ISO 13485. It is whether the audit you book will produce the certificate Health Canada accepts. A standalone ISO 13485 certificate, however well earned, is not an MDSAP certificate.

Getting that right at the start is the difference between one audit program and two.

Industry in Toronto

  • Synaptive Medical Listed by the City of Toronto among the city's life sciences companies
  • Conavi Medical Also on the City of Toronto's life sciences list, part of a sector the City counts at 30,490 jobs in 2023
  • MolecuLight Also on the City of Toronto's life sciences company list
  • JLABS, Toronto Johnson & Johnson's incubator for emerging health care companies, named by the City as a sector asset
  • The 9,255 small manufacturers Toronto CMA businesses with 1 to 99 employees (Statistics Canada, June 2026), where ISO 9001 is the general-purpose certificate

What Health Canada asks for, by device class

Class I. Class I devices do not need a medical device license: section 26 of the Medical Devices Regulations requires one only for Class II, III and IV devices, so there is no license application and no quality management system certificate to file with Health Canada. Customers, distributors and export markets may still ask for ISO 13485.

Class II, III and IV. The Medical Devices Regulations require a quality management system certificate with the license application — under paragraph 32(2)(f) for Class II, 32(3)(j) for Class III and 32(4)(p) for Class IV — certifying that the quality management system under which the device is manufactured (Class II) or designed and manufactured (Class III and IV) meets CAN/CSA-ISO 13485, the National Standard of Canada adoption of ISO 13485.

The certificate has to be MDSAP. Health Canada replaced its earlier Canadian certification scheme with MDSAP, and its transition notice is explicit: as of January 1, 2019, only MDSAP certificates are accepted. The same transition moved every Class II to IV manufacturer onto ISO 13485:2016 by March 1, 2019; the Regulations cite its Canadian adoption, CAN/CSA-ISO 13485.

And the certificate has to stay current with Health Canada. Under section 43.1 of the Regulations, a manufacturer submits a copy of any new or modified certificate within thirty days of its issue. Scope changes, site moves and recertifications all generate a filing, which belongs in your ISO 13485 system as a controlled step rather than a reminder in someone's calendar.

One audit, five regulators

MDSAP is not a Canadian scheme with a new name. It is a single audit program run jointly by five regulators: Australia's Therapeutic Goods Administration, Brazil's ANVISA, Health Canada, Japan's Ministry of Health, Labour and Welfare with the PMDA, and the US Food and Drug Administration.

The US side matters for a Toronto company with American customers. The FDA states that it may continue to accept MDSAP audit reports as a substitute for its routine inspections, with one stated exception: firms with electronic product radiation control activities remain subject to FDA inspection for those activities.

That makes the sequencing argument straightforward. A device company that certifies to ISO 13485 alone and later applies for a Canadian license will need the MDSAP audit anyway. A company that starts with MDSAP gets the Canadian certificate and an audit report the FDA may use, from one program. We set out how the US quality system regulation now relates to ISO 13485 on our Minneapolis page.

One practical note: the FDA reported in December 2025 that MDSAP program documents have moved to a website managed by Australia's TGA. If a bookmark from an earlier project no longer resolves, that is why.

The rest of the 9,902

Most of Toronto's manufacturing base does not make medical devices. When one of the 9,255 businesses in the 1 to 99 employee range is asked for a certificate by a customer, a parent company or a public buyer, ISO 9001 is the general-purpose answer.

For those companies, the useful local fact is about recognition. The Standards Council of Canada describes itself as the only internationally recognized accreditation body in Canada offering management systems accreditation, and states that it has long been a signatory to the international recognition arrangement for most of its management systems programs. On that basis, it says, certification to ISO 9001 by SCC-accredited certification bodies is widely accepted internationally.

That arrangement has a new home. Since January 1, 2026, the international accreditation forums have operated as Global Accreditation Cooperation Incorporated (Global ACI), and the recognition of existing accredited certificates continued without interruption. For a Toronto exporter, a certificate from a body accredited by SCC, or by another body in the same arrangement, is the one to hold.

ISO 9001 itself has a new edition: ISO published ISO 9001:2026 on September 16, 2026. If you are certifying now, ask your certification body which edition the audit will use and when it can first audit to 2026; for a supplier answering a customer's certificate request, that date is the one to put in the reply. Our ISO 9001:2026 transition guide covers what changed.

Which metro this page means

Business counts are only useful if the boundary is right, and the Toronto census metropolitan area is not the same as the Greater Toronto Area in everyday use.

The CMA includes Toronto, Mississauga, Brampton, Caledon, Vaughan, Markham, Richmond Hill, Oakville, Milton, Halton Hills, Ajax, Pickering, Newmarket, Aurora and a ring of smaller municipalities out to Orangeville, New Tecumseth and Bradford West Gwillimbury. Burlington is not in it: Statistics Canada places Burlington in the Hamilton CMA. Oshawa, Whitby and Clarington are not in it either.

The City of Toronto's life sciences figures quoted above are for the city itself, not the CMA, and come from a different source. They describe the sector's weight; the Statistics Canada counts describe the business base. We keep the two apart.

Health technology, data and safety

A share of Toronto's life sciences sector is software and data: the City's list of sector assets includes WIMTACH, a federally funded Technology Access Centre for digital health, and health technology incubators alongside device and pharmaceutical companies. For those businesses a certificate customers may ask about is ISO/IEC 27001, which SCC accredits certification bodies for under the same international arrangement as ISO 9001.

On occupational health and safety, Ontario runs a voluntary program that recognizes employers who have implemented a safety management system built on a standard the province accredits, ISO 45001 among them, and recognized employers may be eligible for WSIB rebates. We explain how it works on our Hamilton page.

How we work with companies here

We work with Toronto companies on site and remotely, from the first gap analysis to the day the certificate arrives.

For device work, the first deliverable is a regulatory map: which device classes you sell, in which MDSAP jurisdictions, and therefore which jurisdiction-specific requirements the single audit will test on top of ISO 13485:2016. That map sets the scope of everything after it.

The consultant who scopes the engagement does the work. No handoff to a junior implementer after the sale.

100% certification success. Every client we have taken to a Stage 2 certification audit has been certified, with no major nonconformities. 100% of surveyed clients would recommend us. Every client who answered our client satisfaction survey said they would recommend Glocal Insight.

ISO standards we help Toronto companies with

This page focuses on ISO 13485, and we can help Toronto companies with any of the standards below. If you are deciding whether to bring in outside help, start with what an ISO consultant does, how fees work and when certification is worth it. For the national picture, see ISO certification in Canada.

ISO 13485 in Toronto

The Toronto census metropolitan area has 326 medical equipment and supplies manufacturers (Statistics Canada, Canadian Business Counts, June 2026). ISO 13485 is the quality management standard for medical devices, and Health Canada requires an ISO 13485 certificate issued under the Medical Device Single Audit Program for Class II, III and IV medical device licenses.

The focus of this page. ISO 13485 consultants → · Free ISO 13485 internal audit checklist · ISO 13485 audit days calculator

ISO 9001 in Toronto

The City of Toronto puts the region's food and beverage workforce at more than 64,000. The plants answer to the CFIA and to food safety schemes; the firms that supply them need to know which certificate their customer actually means. The Toronto census metropolitan area has 9,902 manufacturing businesses with employees, 9,255 of them with fewer than 100 employees, and 11,401 wholesale businesses (Statistics Canada, Canadian Business Counts, June 2026). ISO 9001 is the most widely held ISO management system certification and the base that AS9100, ISO 13485 and the other sector standards build on.

ISO 9001 in Toronto: the full page → · Free ISO 9001:2026 gap analysis checklist · Free ISO 9001 internal audit checklist

ISO 27001 in Toronto

The Toronto census metropolitan area has 16,721 computer systems design, software publishing and hosting businesses (Statistics Canada, Canadian Business Counts, June 2026). ISO 27001 is the internationally recognized certification for an information security management system, and a common answer to enterprise customers' security questionnaires.

ISO 27001 consultants → · Free ISO 27001 internal audit checklist · ISO 27001 audit days calculator

ISO 14001 in Toronto

The Toronto census metropolitan area has 1,265 businesses in chemical, plastics and rubber, paper, primary metal, and metal coating and finishing manufacturing (Statistics Canada, Canadian Business Counts, June 2026), the industries where air, water and waste obligations tend to be heaviest. ISO 14001 gives a site one system for its permits, its environmental aspects and its customers' sustainability questionnaires.

ISO 14001 consultants → · Free ISO 14001:2026 gap analysis checklist · Free ISO 14001 internal audit checklist

AS9100 in Toronto

The Toronto census metropolitan area has 67 aerospace product and parts businesses and 378 machine shops and turned-product makers (Statistics Canada, Canadian Business Counts, June 2026). AS9100 adds aerospace requirements to ISO 9001, and it reaches machine shops and processors through the purchase orders of the aerospace companies they supply; distributors use AS9120.

AS9100 consultants → · Free AS9100 internal audit checklist

ISO 45001 in Toronto

The Toronto census metropolitan area has 9,902 manufacturing businesses with employees and 21,668 construction businesses (Statistics Canada, Canadian Business Counts, June 2026). ISO 45001 turns a safety program into a management system, with hazard identification, worker participation and incident follow-up that a customer, general contractor or insurer can check.

ISO 45001 consultants →

ISO 42001 in Toronto

The Toronto census metropolitan area has 671 software publishers (Statistics Canada, Canadian Business Counts, June 2026). ISO/IEC 42001 is the management system standard for organizations that develop or use AI, and it fits alongside an existing ISO 27001 system.

ISO 42001 consultants →

ISO 17025 in Toronto

ISO/IEC 17025 is the accreditation standard for testing and calibration laboratories, including in-house labs whose results customers or regulators rely on.

ISO 17025 consultants →

What an engagement covers

  • MDSAP readiness assessment Your system against ISO 13485:2016 and the requirements of the MDSAP jurisdictions you sell into, starting with Health Canada.
  • ISO 13485 system build A device quality management system designed around your processes and device classes, structured for an MDSAP audit from the start. See ISO 13485.
  • License-ready certificate control Certificate scope, site list and the thirty-day filing of new or modified certificates under section 43.1, built into the system as controlled steps.
  • ISO 9001 for the manufacturing base A quality management system for suppliers asked for a certificate, planned against the 2026 edition. See ISO 9001.
  • ISO/IEC 27001 for health technology An information security management system for software and data businesses selling into health care. See ISO/IEC 27001.
  • Gap analysis and roadmap Two to four weeks, fixed scope and price, with a clear go or no-go before real money is committed.
  • Internal audit and management review Auditor-grade internal audits and a facilitated management review producing recorded decisions.

Questions we get from companies in this market

Does Health Canada accept an ISO 13485 certificate for a Class II license?

Only if it was issued under MDSAP. A Class II, III or IV license application needs a quality management system certificate, and Health Canada's transition notice states that as of January 1, 2019, only MDSAP certificates are accepted. A standalone ISO 13485 certificate does not meet that requirement, so a company planning a Canadian license should start with an MDSAP audit rather than add one later.

Do Class I devices need a quality system certificate in Canada?

No. Class I devices do not need a medical device license, which the Medical Devices Regulations require only for Class II, III and IV devices, so Health Canada asks for no quality management system certificate. Distributors, hospital buyers and export markets may still ask for ISO 13485, so the commercial case can exist even where the regulatory one does not.

Can one audit cover Health Canada and the FDA?

That is what MDSAP is for. The program is run by Health Canada, the FDA, Australia's TGA, Brazil's ANVISA and Japan's regulators, and the FDA states that it may accept MDSAP audit reports as a substitute for its routine inspections. The stated exception is electronic product radiation control activities, which remain subject to FDA inspection. The audit tests each jurisdiction's requirements you sell into, so the scope has to be set deliberately.

Will a certificate from a Canadian certification body be accepted by US and European customers?

Generally, yes, when the certification body is accredited. The Standards Council of Canada states that it signs the international recognition arrangement for most of its management systems programs and that certification by SCC-accredited bodies is widely accepted internationally. That arrangement has run under Global ACI since January 1, 2026. A customer contract can still name a specific requirement, so check yours.

Does this page cover Mississauga, Vaughan, Oakville and Burlington?

Mississauga, Vaughan, Brampton, Markham, Oakville, Milton and Halton Hills are all in the Toronto census metropolitan area, and the business counts on this page include them. Burlington is not: Statistics Canada places it in the Hamilton CMA. Oshawa, Whitby and Clarington are outside the Toronto CMA as well.

What will certification cost?

Audit days are set from the number of people within your certification scope against a published table, then adjusted for factors including system complexity and the number of sites. Device work generally sits at the higher end, and an MDSAP audit covers the requirements of each jurisdiction you sell into. For an MDSAP or ISO 13485 quote, ask the auditing organization to show how it calculated the audit days; the table on our cost page is the one used for ISO 9001 and ISO/IEC 27001. Our certification cost breakdown reproduces that ISO 9001 and ISO/IEC 27001 table.