Skip to content

Vancouver, British Columbia

ISO consultants for Vancouver employers and port suppliers.

British Columbia requires a formal occupational health and safety program from employers with 20 or more workers and a moderate or high hazard rating, or 50 or more workers. ISO 45001 is a way to build it that also earns a certificate.

ISO certification consulting in Vancouver at a glance

Who we are
Glocal Insight: senior ISO management system consultants working with Vancouver companies on site and remotely. The consultant who scopes the work does the work.
Standards
ISO 9001, AS9100, ISO 14001, ISO 45001, ISO 27001, ISO 42001, ISO 13485, ISO 17025, plus internal audits, auditor training and ISO certification maintenance.
Typical timeline
For ISO 9001 at a company of 10 to 100 people, about three to four months from kickoff to the Stage 2 audit. Week by week.
Cost
A standalone gap analysis is typically in the low five figures; full implementation depends on scope. Certification body fees are separate. How certification costs are set, or estimate your audit days.
Track record
100% certification success. 100% of surveyed clients would recommend us.
Contact
(816) 535-0738 or start a conversation.

BC already requires the program. ISO 45001 is a way to build it once.

In British Columbia every employer needs a health and safety program, and past set thresholds it must be a formal one. Section 3.1 of the Occupational Health and Safety Regulation says a formal occupational health and safety program must be initiated and maintained by every employer with 20 or more workers and at least one workplace with a moderate or high hazard rating, and by every employer with 50 or more workers, whatever the rating. Once either applies, the program covers the employer's whole operation.

The hazard rating in that test is the one defined in Schedule 3-A of the Regulation, the schedule that also governs first aid. Since November 1, 2024, WorkSafeBC has required employers to carry out and document a first aid assessment for every workplace, annually and whenever conditions change. The rating that sets your first aid also helps decide whether the law requires a formal program.

WorkSafeBC's program pages do not mention ISO 45001, and a certificate does not discharge the Regulation. What ISO 45001 does is give a Vancouver employer a structure in which every element section 3.3 requires already has a home, plus the parts the Regulation does not ask for: internal audit, management review and a disciplined corrective action loop.

For an employer with 20 to 49 workers and a moderate- or high-rated workplace, that is the practical question: you are building a program either way. Building it to the standard from the start means building it once, and it leaves the door open to a credential your customers recognize.

Industry in Vancouver

  • Port of Vancouver (Vancouver Fraser Port Authority) Described by the authority as Canada's largest port; 29 major terminals and more than 1,000 tenants
  • Seaspan Shipyards Vancouver Shipyards and Vancouver Drydock; strategic shipbuilding partner for the Coast Guard and Navy
  • STEMCELL Technologies Head office in Vancouver; manufacturing and operations sites in Burnaby
  • TELUS Principal executive office at 510 West Georgia Street, Vancouver

What the Regulation requires in a formal program

Section 3.3 sets out the contents. The program must be designed to prevent injuries and occupational diseases, and it must include: (a) a statement of the employer's aims and the responsibilities of the employer, supervisors and workers; (b) regular inspection of premises, equipment, work methods and work practices; (c) written instructions for workers; (d) periodic management meetings; (e) investigation of incidents; (f) records and statistics, available to the joint committee or worker health and safety representative; and (g) instruction and supervision of workers in the safe performance of their work.

Below the thresholds, section 3.2 asks for less: a less formal program built on regular monthly meetings with workers to discuss health and safety, with records of the meetings and what was discussed. WorkSafeBC can still require a smaller workplace to move to a formal program, for example where there is high-risk work, many injury claims, or multiple serious injuries or fatalities, and section 3.1(2) lets an officer require a program wherever one is judged necessary.

WorkSafeBC's guidance on the details sits in OHS Guidelines G3.1 and G3.2. Its program page describes an effective program as one that identifies and controls hazards, prevents injury and disease, limits financial losses and includes sub-programs for site-specific risks such as lockout, fall protection and confined space entry.

Where each requirement lives in ISO 45001

Every section 3.3 element has a natural home in ISO 45001. The statement of aims and responsibilities is the OH&S policy and the roles and authorities clause. Inspections are part of monitoring and measurement. Written instructions and instruction and supervision sit in operational planning and control and in the competence clause. Incident investigation is the incident, nonconformity and corrective action clause. Records and statistics are documented information, and the joint committee's access to them fits the standard's clause on worker consultation and participation.

The Regulation's periodic management meetings are the closest it comes to ISO 45001's management review, and the standard asks for more: a review against objectives, the status of actions, legal compliance, worker consultation outcomes and the adequacy of resources, with recorded decisions.

What ISO 45001 adds on top is the part that keeps a program from going stale: an internal audit program that tests whether the system works as written, measurable objectives, a hazard identification process that covers change and contractors, and a register of legal and other requirements that keeps track of the Regulation as WorkSafeBC amends it.

One caution runs the other way. ISO 45001 is written for every jurisdiction, so it does not list BC's specific requirements. The joint committee rules, the first aid assessment, and the Regulation's hazard-specific parts still have to be built into the system. A certificate earned on a generic system can leave those gaps open.

Vancouver's employers and supply chains

The Port of Vancouver, which its port authority describes as Canada's largest port, has 29 major terminals and more than 1,000 tenants along Burrard Inlet, Roberts Bank and the Fraser River, and borders 16 municipalities. Terminal operators, marine services, logistics and maintenance contractors all work inside its footprint.

Seaspan Shipyards runs Vancouver Shipyards and Vancouver Drydock on the north shore of the port, and is Canada's long-term strategic shipbuilding partner for the Canadian Coast Guard and the Royal Canadian Navy under the National Shipbuilding Strategy. STEMCELL Technologies has its head office in Vancouver and manufacturing and operations sites in Burnaby. TELUS has its principal executive office on West Georgia Street.

For manufacturers in this mix, ISO 9001 is the base quality credential, and life-sciences manufacturers selling devices may need ISO 13485. Environmental management under ISO 14001 can sit beside safety for port and marine work, and the three can share one management system.

The metro, counted properly

The Vancouver census metropolitan area has 4,077 manufacturing businesses with employees, 3,899 of them with 1 to 99 employees, and 9 with 500 or more (Statistics Canada, Canadian Business Counts, June 2026). Statistics Canada counts business locations, so read these as locations rather than headcounts. More than 95% of these locations have fewer than 100 employees, the range in which the Regulation's 20- and 50-worker thresholds, counted across an employer's whole workforce, decide what kind of program is required.

The metro covers Vancouver, Burnaby, Surrey, Richmond, Delta, Coquitlam, the Langleys, Maple Ridge, Pitt Meadows, New Westminster, the North Shore municipalities and their neighbors. Abbotsford and Squamish are outside it.

One naming note: this page is about Vancouver, British Columbia. Vancouver, Washington, is part of the Portland metro, under a different country's safety law.

How we work with companies here

We work with Vancouver companies on site and remotely, from the first gap analysis to the day the certificate arrives.

The first working session is usually a reading of the program you already have against section 3.3 of the Regulation and against ISO 45001. Employers past the thresholds should already have a program on paper; the work is organizing it so it runs and can be audited, or building the missing parts.

Your certificate is issued by a certification body accredited by the Standards Council of Canada or by another accreditation body in the Global ACI recognition arrangement, which replaced the IAF arrangement on January 1, 2026. SCC is a signatory for most of its management systems programs, and it states that certification by SCC-accredited bodies in those programs is widely accepted internationally.

The consultant who scopes the engagement does the work. No handoff to a junior implementer after the sale.

100% certification success. Every client we have taken to a Stage 2 certification audit has been certified, with no major nonconformities. 100% of surveyed clients would recommend us. Every client who answered our client satisfaction survey said they would recommend Glocal Insight.

ISO standards we help Vancouver companies with

This page focuses on ISO 45001, and we can help Vancouver companies with any of the standards below. If you are deciding whether to bring in outside help, start with what an ISO consultant does, how fees work and when certification is worth it. For the national picture, see ISO certification in Canada.

ISO 45001 in Vancouver

The Vancouver census metropolitan area has 4,077 manufacturing businesses with employees and 13,911 construction businesses (Statistics Canada, Canadian Business Counts, June 2026). ISO 45001 turns a safety program into a management system, with hazard identification, worker participation and incident follow-up that a customer, general contractor or insurer can check.

The focus of this page. ISO 45001 consultants →

ISO 9001 in Vancouver

Seaspan pre-qualifies every supplier on quality, then rates each one during and after the work. For a B.C. fabricator or service firm, that rating is the ISO 9001 question that matters. The Vancouver census metropolitan area has 4,077 manufacturing businesses with employees, 3,899 of them with fewer than 100 employees, and 5,262 wholesale businesses (Statistics Canada, Canadian Business Counts, June 2026). ISO 9001 is the most widely held ISO management system certification and the base that AS9100, ISO 13485 and the other sector standards build on.

ISO 9001 in Vancouver: the full page → · Free ISO 9001:2026 gap analysis checklist · Free ISO 9001 internal audit checklist

ISO 14001 in Vancouver

The Vancouver census metropolitan area has 435 businesses in chemical, plastics and rubber, paper, primary metal, and metal coating and finishing manufacturing (Statistics Canada, Canadian Business Counts, June 2026), the industries where air, water and waste obligations tend to be heaviest. ISO 14001 gives a site one system for its permits, its environmental aspects and its customers' sustainability questionnaires.

ISO 14001 consultants → · Free ISO 14001:2026 gap analysis checklist · Free ISO 14001 internal audit checklist

ISO 13485 in Vancouver

The Vancouver census metropolitan area has 173 medical equipment and supplies manufacturers (Statistics Canada, Canadian Business Counts, June 2026). ISO 13485 is the quality management standard for medical devices, and Health Canada requires an ISO 13485 certificate issued under the Medical Device Single Audit Program for Class II, III and IV medical device licenses.

ISO 13485 consultants → · Free ISO 13485 internal audit checklist · ISO 13485 audit days calculator

AS9100 in Vancouver

The Vancouver census metropolitan area has 21 aerospace product and parts businesses and 113 machine shops and turned-product makers (Statistics Canada, Canadian Business Counts, June 2026). AS9100 adds aerospace requirements to ISO 9001, and it reaches machine shops and processors through the purchase orders of the aerospace companies they supply; distributors use AS9120.

AS9100 consultants → · Free AS9100 internal audit checklist

ISO 27001 in Vancouver

The Vancouver census metropolitan area has 3,860 computer systems design, software publishing and hosting businesses (Statistics Canada, Canadian Business Counts, June 2026). ISO 27001 is the internationally recognized certification for an information security management system, and a common answer to enterprise customers' security questionnaires.

ISO 27001 consultants → · Free ISO 27001 internal audit checklist · ISO 27001 audit days calculator

ISO 42001 in Vancouver

The Vancouver census metropolitan area has 225 software publishers (Statistics Canada, Canadian Business Counts, June 2026). ISO/IEC 42001 is the management system standard for organizations that develop or use AI, and it fits alongside an existing ISO 27001 system.

ISO 42001 consultants →

ISO 17025 in Vancouver

ISO/IEC 17025 is the accreditation standard for testing and calibration laboratories, including in-house labs whose results customers or regulators rely on.

ISO 17025 consultants →

What an engagement covers

  • Section 3.3 and ISO 45001 gap review Your existing program read against BC's required elements and against the standard, in one pass.
  • ISO 45001 system build A safety management system with BC's Regulation built into its register of legal and other requirements. See ISO 45001.
  • Joint committee and worker participation Records, statistics and consultation routines that satisfy the Regulation and the standard's participation clause together.
  • ISO 14001 and ISO 9001 on the same system Environment and quality sharing documents, audits and management review with safety. See ISO 14001.
  • Gap analysis and roadmap Two to four weeks, fixed scope and price, with a clear go or no-go before real money is committed.
  • Internal audit and management review Auditor-grade internal audits and a facilitated management review producing recorded decisions.

Questions we get from companies in this market

Do we need a formal health and safety program in BC?

Under section 3.1 of the Occupational Health and Safety Regulation, yes if you have 20 or more workers and at least one workplace with a moderate or high hazard rating, or 50 or more workers regardless of rating. The program then covers your whole operation. Below those thresholds a less formal program based on monthly meetings with workers is required, and WorkSafeBC can require a formal program from a smaller workplace where it judges one necessary.

Does ISO 45001 certification satisfy WorkSafeBC?

Not by itself. WorkSafeBC's program pages do not mention ISO 45001, and the Regulation's requirements apply whether or not you hold a certificate. A well-built ISO 45001 system can contain every element section 3.3 requires, and it adds internal audit, management review and objectives. But the BC-specific parts, such as joint committee requirements, the first aid assessment and hazard-specific rules, have to be built in deliberately.

What has to be in a formal OHS program in BC?

Section 3.3 lists it: a statement of the employer's aims and the responsibilities of employer, supervisors and workers; regular inspections; written instructions; periodic management meetings; incident investigations; records and statistics available to the joint committee or worker representative; and instruction and supervision of workers. WorkSafeBC's Guideline G3.1 gives more detail, and G3.2 covers the less formal program for smaller employers.

How does the first aid hazard rating affect our program?

Section 3.1 uses the hazard rating defined in Schedule 3-A, the first aid schedule, as part of its test for a formal program. For an employer with 20 to 49 workers, a workplace rated moderate or high is what turns a less formal program into a formal one. Since November 1, 2024, WorkSafeBC has required a documented first aid assessment for every workplace, repeated annually and when conditions change.

Is ISO 45001 worth it if the Regulation already requires a program?

Often, because you are building a program either way. Certification adds an external check that the system works, a credential customers recognize, and the internal audit and management review disciplines that keep a program current. If no customer asks for it yet, build the section 3.3 program to the standard's structure so it can be certified later without rework.

What will ISO 45001 certification cost?

Audit days are set from the number of people within your certification scope, then adjusted for complexity and the number of sites, so scope is the biggest lever. Our certification cost breakdown explains how quotes are built so you can check any quote you receive.