Skip to content

Seattle, Washington

ISO consultants for Puget Sound aerospace suppliers.

Boeing requires AS9100 of its production suppliers. Its supplier quality document also sends Boeing's findings and your delivery data to your certification body, and a probation triggers a short-notice audit.

ISO certification consulting in Seattle at a glance

Who we are
Glocal Insight: senior ISO management system consultants working with Seattle companies on site and remotely. The consultant who scopes the work does the work.
Standards
ISO 9001, AS9100, ISO 14001, ISO 45001, ISO 27001, ISO 42001, ISO 13485, ISO 17025, plus internal audits, auditor training and ISO certification maintenance.
Typical timeline
For ISO 9001 at a company of 10 to 100 people, about three to four months from kickoff to the Stage 2 audit. Week by week.
Cost
A standalone gap analysis is typically in the low five figures; full implementation depends on scope. Certification body fees are separate. How certification costs are set, or estimate your audit days.
Track record
100% certification success. 100% of surveyed clients would recommend us.
Contact
(816) 535-0738 or start a conversation.

Boeing's AS9100 requirement comes with your scorecard attached

The Seattle metro has 3,154 manufacturing establishments, 2,938 of them with fewer than 100 employees, employing about 160,000 people (US Census County Business Patterns, 2023, Seattle-Tacoma-Bellevue MSA: King, Pierce and Snohomish Counties). Boeing's major Washington facilities in Everett, Renton, Auburn and Frederickson all sit inside it, and Boeing says it has more employees in Washington than anywhere else in the world.

For a shop that designs, develops or produces product for Boeing, D6-82479 Appendix A means AS9100. The part that decides how a certificate holds up is what Boeing attaches to it.

Boeing's supplier quality requirements, D6-82479 Revision K, released November 14, 2025, require suppliers that design, develop or produce product to be certified to 9100 by an accredited certification body listed in the IAQG OASIS database. Then they go further. Boeing's own supplier evaluation findings, and your quality and delivery performance data, must be provided to your certification body before or during your audits. And a downgrade to Probation or Disapproved means a special short-notice audit by that body.

At Boeing, then, your customer's scorecard and your registrar's audit are connected by contract. A Seattle supplier's AS9100 system is tested against its delivery record, not only against the standard.

Industry in Seattle

  • Boeing Commercial Airplanes Major facilities in Everett, Renton, Auburn and Frederickson, all inside this metro; Boeing's corporate headquarters is in Arlington, Virginia
  • The Boeing supply base D6-82479 Revision K (November 2025): every location that manufactures, inspects, tests or assembles for Boeing needs an accredited 9100 certificate covering those processes
  • PACCAR, Bellevue Headquartered in Bellevue, King County; classified by the SEC under motor vehicles and passenger car bodies
  • Microsoft, Redmond, and Amazon, Seattle Both headquartered in King County: the software and cloud side of the metro, where ISO/IEC 27001 is the relevant standard
  • Aviation distributors and maintenance shops Boeing's Appendices D and E call for 9120, which we support; Appendix C calls for 9110, which is outside our scope

What D6-82479 attaches to the certificate

Section 2 of D6-82479 sets the conditions under which Boeing recognizes your certification as evidence of compliance. Boeing reserves the right to make the final determination on compliance, to assess your system itself, and to terminate recognition of your certificate regardless of its status.

The conditions include these. The certification body must be accredited and operate under the IAQG scheme in 9104-001. You keep the certificate, the audit reports and every finding with evidence that its corrective action was accepted and closed. You tell your Boeing Supplier Quality Representative in writing if you change certification body. Your agreement with that body gives Boeing, the accreditation body and IAQG oversight a right of access to its records. And on request you give Boeing access to your audit results in OASIS.

Two conditions change how you run the system. Boeing's Supplier Evaluation Report nonconformities and your quality and delivery data go to your certification body before or during the initial, surveillance, special and recertification audits, so that they shape the audit plan. And if Boeing moves you to Probation or Disapproved, you arrange a special short-notice audit whose scope includes the process performance behind the downgrade and its impact on your certification.

The practical consequence: an internal audit program that ignores your Boeing scorecard is auditing a different company from the one your registrar will see. Build the scorecard into your internal audit plan and your management review inputs.

Supplemental requirements that reach the shop floor

Section 3 adds requirements on top of 9100 unless the purchase contract says otherwise. Every supplier location that performs or outsources manufacturing, fabrication, installation, servicing, additional inspection or test, re-identification, assembly or kitting must hold an accredited 9100 certificate with those processes in its scope. If you add a building or move a process, the certificate scope has to follow it.

Raw material accepted on the basis of test reports must have those reports checked 100% against your requirements and specifications, and periodically validated by testing samples yourself or through an independent party, on a schedule set by the provider's history, unless a Boeing specification says otherwise. Calibration records must carry the register elements the standard defines, together with the results. Distributors you buy from must be evaluated on their ability to conform to 9120.

Changes that could affect your system's ability to meet Boeing requirements, including changes of scope or of clauses you treat as not applicable, must be reported in writing to the Boeing Supplier Quality Representative and procurement agent. Which appendix applies to you is set by your contract.

Where our scope stops in this supply chain

D6-82479 has four active appendices. Appendix A is 9100 and Appendices D and E are 9120, for distributors; we support both. Appendix C (9110, for maintenance organizations) is specialist work outside our scope. Boeing no longer recognizes AS9003 for production approvals and marks that appendix obsolete.

Deliverable software has an addendum of its own, built on 9100 together with either 9115 or CMMI, and Boeing's supplier guidance says 9115 requires Boeing second-party approval.

Boeing's guidance also says it contractually flows quality management system standards and expects suppliers to obtain accredited certification, and D6-82479 notes that 9100 contains the requirements of ISO 9001 with aerospace supplementation. An ISO 9001 system is therefore the foundation for a shop that wants Boeing production work, not the destination.

Washington's own safety rules

Washington runs an OSHA-approved State Plan through the Department of Labor and Industries' Division of Occupational Safety and Health, covering private employers and state and local government. Federal OSHA keeps some work, including offshore maritime work such as shipyard employment, and military reservations.

Every employer in the state must have a formal, written Accident Prevention Program tailored to its workplace and hazards (WAC 296-800-140), with a safety orientation and a safety committee or safety meetings among its required elements. An ISO 45001 system here should contain the program rather than sit beside it. How Washington's committee rule differs from Oregon's, a short drive south, is set out on our Portland page.

How we work with companies here

We work with Seattle companies on site and remotely, and we put the on-site days where being in the building changes the outcome: the gap analysis walkthrough, the first internal audit cycle, and the certification audits.

For Boeing suppliers we start with two documents side by side: the D6-82479 appendix your contract calls out, and your current supplier scorecard. The first sets what you must certify. The second shows what your certification body will be given.

The consultant who scopes the engagement does the work. No handoff to a junior implementer after the sale.

100% certification success. Every client we have taken to a Stage 2 certification audit has been certified, with no major nonconformities. 100% of surveyed clients would recommend us. Every client who answered our client satisfaction survey said they would recommend Glocal Insight.

ISO standards we help Seattle companies with

This page focuses on AS9100, and we can help Seattle companies with any of the standards below. If you are deciding whether to bring in outside help, start with what an ISO consultant does, how fees work and when certification is worth it.

AS9100 in Seattle

The Seattle metro has 173 aerospace product and parts establishments and 189 machine shops (BLS QCEW, 2024 annual averages). Aerospace employment here runs about 10.3 times its national share. AS9100 adds aerospace requirements to ISO 9001, and it reaches machine shops and processors through the purchase orders of the aerospace companies they supply; distributors use AS9120.

The focus of this page. AS9100 consultants → · Free AS9100 internal audit checklist

ISO 9001 in Seattle

Boeing's direct suppliers that make, inspect or assemble product need an accredited 9100 certificate. The machine shops, platers and assemblers working for those suppliers are governed by a different sentence in the same document, and it does not say certificate. The Seattle metro has 3,154 manufacturing establishments, 2,938 of them with fewer than 100 employees (US Census County Business Patterns, 2023), and 3,728 durable-goods wholesalers (BLS QCEW, 2024 annual averages). ISO 9001 is the most widely held ISO management system certification and the base that AS9100, ISO 13485 and the other sector standards build on.

ISO 9001 in Seattle: the full page → · Free ISO 9001:2026 gap analysis checklist · Free ISO 9001 internal audit checklist

ISO 27001 in Seattle

Washington's My Health My Data Act covers health data far outside healthcare: apps, wearables, retailers and the processors behind them. It requires restricted access and reasonable security for all of it. The Seattle metro has 11,266 computer systems design, software publishing and hosting establishments (BLS QCEW, 2024 annual averages). Software publishing employment here runs about 8.0 times its national share. ISO 27001 is the internationally recognized certification for an information security management system, and a common answer to enterprise customers' security questionnaires.

ISO 27001 in Seattle: the full page → · Free ISO 27001 internal audit checklist · ISO 27001 audit days calculator

ISO 45001 in Seattle

The Seattle metro has 3,154 manufacturing establishments (US Census County Business Patterns, 2023) and 12,991 construction establishments (BLS QCEW, 2024 annual averages). ISO 45001 turns a safety program into a management system, with hazard identification, worker participation and incident follow-up that a customer, general contractor or insurer can check.

ISO 45001 consultants →

ISO 14001 in Seattle

The Seattle metro has 389 establishments in chemical, plastics and rubber, paper, primary metal, and metal coating and finishing manufacturing (BLS QCEW, 2024 annual averages), the industries where air, water and waste obligations tend to be heaviest. ISO 14001 gives a site one system for its permits, its environmental aspects and its customers' sustainability questionnaires.

ISO 14001 consultants → · Free ISO 14001:2026 gap analysis checklist · Free ISO 14001 internal audit checklist

ISO 42001 in Seattle

The Seattle metro has 3,726 software publishers and custom programming firms (BLS QCEW, 2024 annual averages). ISO/IEC 42001 is the management system standard for organizations that develop or use AI, and it fits alongside an existing ISO 27001 system. See which state AI laws reference it.

ISO 42001 consultants →

ISO 13485 in Seattle

The Seattle metro has 255 medical equipment and electromedical device manufacturing establishments (BLS QCEW, 2024 annual averages). ISO 13485 is the quality management standard for medical devices, and since February 2, 2026 the FDA's Quality Management System Regulation incorporates it by reference.

ISO 13485 consultants → · Free ISO 13485 internal audit checklist · ISO 13485 audit days calculator

ISO 17025 in Seattle

The Seattle metro has 124 testing laboratories (BLS QCEW, 2024 annual averages). ISO/IEC 17025 is the accreditation standard for testing and calibration laboratories, including in-house labs whose results customers or regulators rely on.

ISO 17025 consultants →

What an engagement covers

  • D6-82479 applicability review Which appendix and addenda your contracts invoke, which Section 3 requirements apply, and which purchase orders add Boeing Commercial Airplanes supplements on top.
  • AS9100 system build A 9100 quality management system built around your processes and Boeing's supplemental requirements. See AS9100.
  • Scorecard-driven internal audits Internal audits planned from your Boeing findings and delivery data, the same inputs your certification body will receive.
  • Raw material and calibration controls Test report checking, periodic validation testing and calibration records built to the Section 3 requirements.
  • Multi-site scope check Every location that manufactures, inspects, tests or assembles for Boeing traced to a certificate scope that covers it.
  • ISO 45001 with Washington's APP inside it A safety management system that contains the written Accident Prevention Program every Washington employer needs. See ISO 45001.
  • Gap analysis and roadmap Two to four weeks, fixed scope and price, with a clear go or no-go before real money is committed.

Questions we get from companies in this market

Does Boeing accept ISO 9001 instead of AS9100?

Not for production suppliers. D6-82479 Revision K requires Appendix A suppliers, those that design, develop or produce product, to be certified to 9100 (AS9100, EN 9100, JISQ 9100 or IA9100) by an accredited certification body listed in the IAQG OASIS database. 9100 contains ISO 9001's requirements, so an ISO 9001 system is a foundation, but it is not a substitute. Your contract sets which appendix applies to you.

What does Boeing share with our certification body?

Under Section 2 of D6-82479, Boeing's Supplier Evaluation Report nonconformities and your quality and delivery performance data must be provided to your certification body before or during your initial, surveillance, special and recertification audits. Boeing also reserves the right to give the body its own quality system findings and performance data. Your agreement with the body must give Boeing a right of access to its records.

We have been moved to Boeing probation. What happens to our AS9100 certificate?

D6-82479 requires you to coordinate with your certification body to arrange a special short-notice audit. Its scope includes the process performance behind the nonconformities that caused the change in status, and an assessment of the impact on your certification. What happens next depends on what that audit finds, which is why the corrective action work should start before the auditor arrives.

Do we need a separate certificate for our second building?

Every supplier location that performs or outsources manufacturing, fabrication, installation, servicing, inspection or test, re-identification, assembly or kitting for Boeing must hold an accredited 9100 certificate with those processes in its scope. Whether a second building joins your existing certificate or gets its own is a question to settle with your certification body. Either way it has to be inside a 9100 scope before Boeing work moves there.

Is Boeing headquartered in Seattle?

No. Boeing's principal executive offices are in Arlington, Virginia, according to its SEC filings. Its major commercial airplane facilities in Everett, Renton, Auburn and Frederickson are inside the Seattle metro, and Boeing says it has more employees in Washington than anywhere else in the world. For supplier paperwork, use the Boeing entity and site named in your purchase order.

Does Washington require a written safety program?

Yes. Every Washington employer must develop a formal, written Accident Prevention Program tailored to its workplace and hazards, under WAC 296-800-140. Its required elements include a safety orientation and a safety committee or safety meetings. Washington runs its own OSHA-approved State Plan through the Department of Labor and Industries, so a safety system built from federal OSHA sources alone will be incomplete here.