Skip to content

Portland, Oregon

ISO consultants for Portland and Vancouver, Washington manufacturers.

The Portland metro spans two OSHA state plans. Oregon counts employees at a location for its safety committee rule; Washington, across the river, counts only those on the same shift at that location.

ISO certification consulting in Portland at a glance

Who we are
Glocal Insight: senior ISO management system consultants working with Portland companies on site and remotely. The consultant who scopes the work does the work.
Standards
ISO 9001, AS9100, ISO 14001, ISO 45001, ISO 27001, ISO 42001, ISO 13485, ISO 17025, plus internal audits, auditor training and ISO certification maintenance.
Typical timeline
For ISO 9001 at a company of 10 to 100 people, about three to four months from kickoff to the Stage 2 audit. Week by week.
Cost
A standalone gap analysis is typically in the low five figures; full implementation depends on scope. Certification body fees are separate. How certification costs are set, or estimate your audit days.
Track record
100% certification success. 100% of surveyed clients would recommend us.
Contact
(816) 535-0738 or start a conversation.

Two state safety plans, one river apart, counting differently

The Portland metro has 3,084 manufacturing establishments, 2,873 of them with fewer than 100 employees, employing about 118,460 people (US Census County Business Patterns, 2023, Portland-Vancouver-Hillsboro MSA). Two of its seven counties, Clark and Skamania, are in Washington. The Vancouver in the metro's name is Vancouver, Washington.

Cross the Columbia and your safety regulator changes. In both directions it is a state plan, not federal OSHA: Oregon OSHA on one bank, Washington's Division of Occupational Safety and Health on the other.

Both states make worker participation in safety a legal requirement, and both do it with committees. They count differently. Oregon's trigger is more than 10 employees at a location. Washington's is 11 or more employees on the same shift at the same location. The membership rules, meeting rules and record retention differ as well.

For a company with a plant in Hillsboro and a warehouse in Vancouver, that means two legal registers inside one ISO 45001 system, and one worker consultation and participation process that has to satisfy two different state rules.

Industry in Portland

  • Intel, Hillsboro Gordon Moore Park at Ronler Acres and the D1X development factory; Intel reported more than $4 billion spent with over 500 Oregon suppliers in the year before October 2023
  • Lattice Semiconductor, Hillsboro Headquartered on NE Moore Court in Hillsboro, Washington County, inside this metro
  • The Greenbrier Companies, Lake Oswego Railroad equipment maker headquartered in Clackamas County, inside this metro
  • Clark County, Washington employers Under Washington's DOSH, not Oregon OSHA: a written Accident Prevention Program, and a safety committee at 11 or more employees on one shift at one location
  • Shipyards and marine terminals Maritime work on navigable waters stays with federal OSHA under both the Oregon and Washington state plans

Oregon: a committee decided by headcount at a location

Every Oregon employer must have a safety committee or hold safety meetings, unless it is a corporation whose sole owner is also its only employee. Under Table 1 of the rule, an employer with more than 10 employees at a location must have a committee unless more than half its employees report to construction sites or move frequently between sites, or most do not regularly work outside an office. An employer with 10 or fewer employees for more than half the year, counting seasonal and temporary workers, may hold safety meetings instead, and so may satellite offices with 10 or fewer employees at each location. Generally, the guide says, the businesses that must have committees have more than 10 employees and are retail or manufacturing establishments.

The rule itself, OAR 437-001-0765, sets the committee's shape. It needs an equal number of employer-selected and employee-elected or volunteer members: at least two members with 20 or fewer employees, at least four above that. It meets monthly, except in months when quarterly worksite inspections are done, or quarterly where the work is mostly office work.

Members must be trained in accident and incident investigation and in hazard identification. The committee must evaluate management's accountability system for safety and health and recommend improvements. Its meeting records are kept for three years. A multi-location employer may run a centralized committee if it meets the rule's conditions, including a written policy. The rule was last amended in September 2024.

Washington: a committee decided by shift and location

Across the river, WAC 296-800-13020 requires a safety committee where you employ 11 or more employees on the same shift at the same location. Below that, you may hold safety meetings with a management representative present instead.

The membership rule differs in kind. Employee-elected members must equal or exceed employer-selected members, an employee-elected member serves at most one year per term, and the committee elects its own chair and sets its own meeting schedule. Minutes are kept for one year, not three.

The committee also sits inside a wider written requirement. Every Washington employer must have a formal, written Accident Prevention Program tailored to its workplace and hazards, with a safety orientation and the committee or safety meetings among its required elements (WAC 296-800-140 and 296-800-14005).

Here is how that plays out. A manufacturer with 30 people at a Hillsboro plant and ten at a Vancouver warehouse needs a committee in Oregon and may hold safety meetings in Washington. Put twelve on one shift in Vancouver and it needs a Washington committee too, built to a different membership rule and kept to a different retention period. Washington's committee rule has no provision for an Oregon-style centralized committee, so plan for a separate one.

Where ISO 45001 fits across both

ISO 45001 requires consultation and participation of workers, including non-managerial workers. In this metro the law has already built the vehicle for that twice. The efficient design is one participation process in the management system, with two statutory committee configurations under it, each documented to its own state's rule: membership ratio, terms, meeting cadence, inspections, training and record retention.

The legal requirements register has to work as two registers. Oregon OSHA and Washington's DOSH each write and adopt their own rules, and an ISO 45001 system that cites federal OSHA alone will be wrong on both banks of the river.

One exception runs the other way. Both state plans leave maritime work to federal OSHA: Oregon's for shipyards, longshoring and marine terminals on navigable waters, Washington's for offshore maritime work including shipyard employment. A ship repair or marine terminal operation here answers to a third regulator for that work.

Intel and the semiconductor base

Intel's Hillsboro campuses, including Gordon Moore Park at Ronler Acres and the D1X development factory, carry research, technology development and manufacturing. In its October 2023 announcement Intel said it had spent more than $4 billion in the previous year with more than 500 Oregon suppliers.

In July 2025 OPB reported nearly 2,400 layoffs at the Hillsboro campus, following 1,300 cuts in late 2024, and said Intel's Oregon payroll had fallen in recent years from around 23,000 to closer to 18,000, and in November 2025 Intel notified the state of another 669 cuts at Hillsboro and Aloha.

Intel's supplier program requires suppliers to know how the Responsible Business Alliance assesses conformance to its Code of Conduct, and that Code requires a management system covering, among other things, health and safety and the environment. What that means for a supplier, and how it maps onto ISO 14001 and ISO 45001, is set out on our San Jose page.

Lattice Semiconductor is headquartered in Hillsboro, and The Greenbrier Companies, a railroad equipment maker, in Lake Oswego, both inside this metro. For the 2,873 manufacturing establishments with fewer than 100 employees around them, ISO 9001 is often the first certificate a customer asks for, and the safety committee they already run is a ready evidence base for ISO 45001.

How we work with companies here

We work with Portland companies on site and remotely, and we put the on-site days where being in the building changes the outcome: the gap analysis walkthrough, the first internal audit cycle, and the certification audits. For two-state employers, that means time on both sides of the river.

The first working session is a headcount map: who works where, on which shift, in which state. It settles how many committees you need and which rule each one follows before any procedure is written.

The consultant who scopes the engagement does the work. No handoff to a junior implementer after the sale.

100% certification success. Every client we have taken to a Stage 2 certification audit has been certified, with no major nonconformities. 100% of surveyed clients would recommend us. Every client who answered our client satisfaction survey said they would recommend Glocal Insight.

ISO standards we help Portland companies with

This page focuses on ISO 45001, and we can help Portland companies with any of the standards below. If you are deciding whether to bring in outside help, start with what an ISO consultant does, how fees work and when certification is worth it.

ISO 45001 in Portland

The Portland-Vancouver metro has 3,084 manufacturing establishments (US Census County Business Patterns, 2023) and 9,352 construction establishments (BLS QCEW, 2024 annual averages). ISO 45001 turns a safety program into a management system, with hazard identification, worker participation and incident follow-up that a customer, general contractor or insurer can check.

The focus of this page. ISO 45001 consultants →

ISO 9001 in Portland

Daimler Truck North America builds trucks on Swan Island, and its published supplier requirements accept ISO 9001 as the quality certificate for production parts. For a Portland shop, that changes which certificate to pursue. The Portland-Vancouver metro has 3,084 manufacturing establishments, 2,873 of them with fewer than 100 employees (US Census County Business Patterns, 2023), and 2,840 durable-goods wholesalers (BLS QCEW, 2024 annual averages). ISO 9001 is the most widely held ISO management system certification and the base that AS9100, ISO 13485 and the other sector standards build on.

ISO 9001 in Portland: the full page → · Free ISO 9001:2026 gap analysis checklist · Free ISO 9001 internal audit checklist

ISO 14001 in Portland

The Portland-Vancouver metro has 433 establishments in chemical, plastics and rubber, paper, primary metal, and metal coating and finishing manufacturing (BLS QCEW, 2024 annual averages), the industries where air, water and waste obligations tend to be heaviest. ISO 14001 gives a site one system for its permits, its environmental aspects and its customers' sustainability questionnaires.

ISO 14001 consultants → · Free ISO 14001:2026 gap analysis checklist · Free ISO 14001 internal audit checklist

ISO 27001 in Portland

The Portland-Vancouver metro has 6,634 computer systems design, software publishing and hosting establishments (BLS QCEW, 2024 annual averages). ISO 27001 is the internationally recognized certification for an information security management system, and a common answer to enterprise customers' security questionnaires.

ISO 27001 consultants → · Free ISO 27001 internal audit checklist · ISO 27001 audit days calculator

AS9100 in Portland

The Portland-Vancouver metro has 34 aerospace product and parts establishments and 191 machine shops (BLS QCEW, 2024 annual averages). AS9100 adds aerospace requirements to ISO 9001, and it reaches machine shops and processors through the purchase orders of the aerospace companies they supply; distributors use AS9120.

AS9100 consultants → · Free AS9100 internal audit checklist

ISO 42001 in Portland

The Portland-Vancouver metro has 4,446 software publishers and custom programming firms (BLS QCEW, 2024 annual averages). ISO/IEC 42001 is the management system standard for organizations that develop or use AI, and it fits alongside an existing ISO 27001 system. See which state AI laws reference it.

ISO 42001 consultants →

ISO 13485 in Portland

The Portland-Vancouver metro has 180 medical equipment and electromedical device manufacturing establishments (BLS QCEW, 2024 annual averages). ISO 13485 is the quality management standard for medical devices, and since February 2, 2026 the FDA's Quality Management System Regulation incorporates it by reference.

ISO 13485 consultants → · Free ISO 13485 internal audit checklist · ISO 13485 audit days calculator

ISO 17025 in Portland

The Portland-Vancouver metro has 108 testing laboratories (BLS QCEW, 2024 annual averages). ISO/IEC 17025 is the accreditation standard for testing and calibration laboratories, including in-house labs whose results customers or regulators rely on.

ISO 17025 consultants →

What an engagement covers

  • Two-state legal requirements register Oregon OSHA and Washington DOSH requirements held separately, mapped to the sites they apply to, with federal OSHA added only where it applies.
  • Committee design for both rules Membership, terms, meeting cadence, inspections, training and record retention set to OAR 437-001-0765 in Oregon and WAC 296-800-13020 in Washington.
  • ISO 45001 system build One consultation and participation process across both states, built around the committees you are required to run. See ISO 45001.
  • Washington Accident Prevention Program The written program WAC 296-800-140 requires, built inside the ISO 45001 system rather than beside it.
  • Environmental system for supplier codes An ISO 14001 system whose records answer a customer's RBA self-assessment. See ISO 14001.
  • Gap analysis and roadmap Two to four weeks, fixed scope and price, with a clear go or no-go before real money is committed.
  • Internal audit and management review Auditor-grade internal audits and a facilitated management review producing recorded decisions.

Questions we get from companies in this market

Does federal OSHA cover our Portland plant?

For most private employers, no. Oregon OSHA, part of the Department of Consumer and Business Services, administers an OSHA-approved State Plan covering private-sector workplaces and state and local government in Oregon. Federal OSHA keeps some work, including maritime work on navigable waters such as shipyards and marine terminals, federal employers, tribal lands and federal military reservations. Across the river, Washington's own State Plan covers Clark and Skamania Counties.

Our Vancouver, Washington site has nine people. Do we need a safety committee there?

Not under Washington's committee rule, which applies where you employ 11 or more employees on the same shift at the same location. Below that you may hold safety meetings with a management representative present. You still need Washington's written Accident Prevention Program, and the count is per shift and location, so a second shift or a move can change the answer.

Can one safety committee cover our Oregon and Washington sites?

Oregon's rule allows a centralized committee for multiple locations if it meets the rule's conditions, including a written policy. Washington's committee rule has no equivalent provision; it ties the requirement to employees on the same shift at the same location. Plan for a separate Washington committee wherever that threshold is met, and run both through one participation process in your management system.

How long do we keep safety committee minutes?

It depends on the side of the river. Oregon's rule requires written records of each safety committee meeting to be kept for three years. Washington's requires committee minutes to be kept for one year and made available to Department of Labor and Industries consultation staff. A single records procedure set to three years satisfies both.

Does ISO 45001 certification satisfy Oregon's safety committee rule?

No. The committee is a legal requirement with its own membership, meeting, inspection, training and record terms, and a certificate does not discharge it. What ISO 45001 does is give the committee a defined place in a management system, so that its inspections, investigations and recommendations feed objectives, corrective action and management review, and become evidence for the standard's worker participation requirements.

Does Intel require ISO certification from suppliers?

Intel's supplier quality page does not name an ISO certificate; it describes Intel's own supplier quality assessments and tools. Its SPARC program, revised in October 2024, requires suppliers to know how the Responsible Business Alliance assesses conformance to its Code of Conduct, which requires a management system rather than a certificate. Your purchase terms may say more, so read them.