Skip to content

San Jose, California

ISO consultants for Silicon Valley's equipment suppliers.

Applied Materials requires its whole supply chain to comply with the RBA Code of Conduct. The Code asks for a management system shaped like ISO 14001 and ISO 45001, not a certificate.

ISO certification consulting in San Jose at a glance

Who we are
Glocal Insight: senior ISO management system consultants working with San Jose companies on site and remotely. The consultant who scopes the work does the work.
Standards
ISO 9001, AS9100, ISO 14001, ISO 45001, ISO 27001, ISO 42001, ISO 13485, ISO 17025, plus internal audits, auditor training and ISO certification maintenance.
Typical timeline
For ISO 9001 at a company of 10 to 100 people, about three to four months from kickoff to the Stage 2 audit. Week by week.
Cost
A standalone gap analysis is typically in the low five figures; full implementation depends on scope. Certification body fees are separate. How certification costs are set, or estimate your audit days.
Track record
100% certification success. 100% of surveyed clients would recommend us.
Contact
(816) 535-0738 or start a conversation.

The supplier requirement that comes before ISO 9001

The San Jose metro has 2,056 manufacturing establishments, 1,919 of them with fewer than 100 employees, employing about 97,360 people (US Census County Business Patterns, 2023, San Jose-Sunnyvale-Santa Clara MSA). Some of the largest potential customers for that small-shop base are headquartered inside the metro: Applied Materials is headquartered in Santa Clara, KLA in Milpitas and Intel in Santa Clara, all inside this metro.

The usual assumption is that customers like these flow down a quality certificate. Read what one of them publishes about its supply chain, and a different document comes first.

Applied Materials states that it requires all members of its global supply chain to comply with the Responsible Business Alliance Code of Conduct, together with its own supplier standards, and it reviews and audits suppliers against that Code (Applied Materials supply chain statement, last updated July 10, 2026). Intel's supplier program says the RBA conformance expectation “extends to Intel's suppliers & their supply chain”, and requires suppliers to know how the RBA assesses conformance to the Code.

The RBA Code is not a quality standard. It covers labor, health and safety, environment and ethics, and its Section E requires a management system to run them. That section follows the structure of ISO 14001 and ISO 45001 closely, and the Code lists both standards among its references. It does not require either certificate. That distinction decides what a supplier here should build first.

Industry in San Jose

  • Applied Materials, Santa Clara Requires all members of its global supply chain to comply with the RBA Code of Conduct, and performs third-party audits of at least half of its high-risk direct suppliers (statement updated July 10, 2026)
  • KLA, Milpitas Headquartered at One Technology Drive in Milpitas, Santa Clara County, inside this metro
  • Intel, Santa Clara Headquartered here; its supplier program requires suppliers to know how the RBA assesses conformance to its Code (revised October 2024)
  • Cisco, San Jose Headquartered on West Tasman Drive; classified by the SEC under computer communications equipment
  • Apple, Cupertino Headquartered at Apple Park in Cupertino, Santa Clara County, inside this metro

What Section E of the RBA Code requires

Section E says participants shall adopt or establish a management system whose scope relates to the content of the Code. It must be designed to ensure compliance with applicable laws, regulations and customer requirements, conformance with the Code, and identification and mitigation of the operational risks the Code covers, and it must facilitate continual improvement.

It then lists twelve elements: company commitment, management accountability and responsibility, legal and customer requirements, risk assessment and risk management, improvement objectives, training, communication, worker and stakeholder engagement with access to remedy, audits and assessments, a corrective action process, documentation and records, and supplier responsibility.

Anyone who has built an environmental or safety management system will recognize that list: policy, leadership accountability, compliance obligations, risks, objectives, competence, communication, worker participation, internal audit, corrective action, documented information and control of external providers. The Code's reference list includes ISO 14001 and ISO 45001:2018, as useful references that each participant may or may not endorse.

Two limits apply. First, the Code asks for a system, not a certificate, and an RBA audit is its own program rather than an ISO certification audit. Second, the Code's labor and ethics requirements sit outside both ISO standards, so a system built to answer the Code has to extend its scope to cover them.

How the requirement reaches a small supplier

Applied's published statement describes the mechanics. It asks the top 80% of its direct suppliers, ranked by spend, and 10% of high-risk indirect suppliers to complete self-assessments every year. It performs third-party audits of at least half of its high-risk direct suppliers and 10% of high-risk indirect ones. It reviews the written policies of the top 80% of its direct suppliers against RBA requirements, flags gaps and requires them to be fixed. Suppliers that fail to cooperate may face consequences up to termination of the relationship.

Look at what is being reviewed: written policies, self-assessment answers and audit evidence. A supplier with a working environmental and safety management system answers those from records it already keeps. A supplier without one writes the policies to order.

The Code also travels down the chain. It says that, at a minimum, participants should require their next-tier suppliers to acknowledge and implement it, and Section E's own last element is a process to communicate Code requirements to suppliers and monitor their compliance. So a ten-person machining, plating or cleaning shop that sells to a subsystem supplier can receive the same request one tier down.

Where ISO 9001 still comes in

None of this replaces quality. Equipment makers buy precision parts, and the quality terms in their purchase orders are their own. The supplier documents these companies publish do not name a required quality certificate, so the place to look is your purchase order and supplier agreement. Read them before assuming that ISO 9001 is the requirement, or that it is not.

Where ISO 9001 is required, the efficient build is one system: quality, environment and safety under one set of procedures, one internal audit program and one management review, scoped so that the same records answer the customer's RBA self-assessment.

California adds one fixed point to the safety side: every employer must keep a written Injury and Illness Prevention Program under 8 CCR 3203, and an ISO 45001 system here should contain it. We set out how the two map on our Los Angeles page.

Two boundary notes

Lam Research is in the same equipment industry, but its headquarters is in Fremont, which is in Alameda County and part of the San Francisco metro, not this one.

Intel's headquarters is in this metro, and its Hillsboro campuses are in Oregon, where Oregon OSHA rather than Cal/OSHA runs the State Plan; we cover suppliers there, including those with sites on the Washington side, on our Portland page.

How we work with companies here

We work with San Jose companies on site and remotely, and we put the on-site days where being in the building changes the outcome: the gap analysis walkthrough, the first internal audit cycle, and the certification audits.

The most useful first document here is often your largest customer's supplier code rather than its quality clauses. We read it with you, map it to the ISO 14001 and ISO 45001 structure, and mark the labor and ethics items that need procedures of their own.

The consultant who scopes the engagement does the work. No handoff to a junior implementer after the sale.

100% certification success. Every client we have taken to a Stage 2 certification audit has been certified, with no major nonconformities. 100% of surveyed clients would recommend us. Every client who answered our client satisfaction survey said they would recommend Glocal Insight.

ISO standards we help San Jose companies with

This page focuses on ISO 14001, and we can help San Jose companies with any of the standards below. If you are deciding whether to bring in outside help, start with what an ISO consultant does, how fees work and when certification is worth it.

ISO 14001 in San Jose

The San Jose metro has 166 establishments in chemical, plastics and rubber, paper, primary metal, and metal coating and finishing manufacturing (BLS QCEW, 2024 annual averages), the industries where air, water and waste obligations tend to be heaviest. ISO 14001 gives a site one system for its permits, its environmental aspects and its customers' sustainability questionnaires.

The focus of this page. ISO 14001 consultants → · Free ISO 14001:2026 gap analysis checklist · Free ISO 14001 internal audit checklist

ISO 9001 in San Jose

If your company designs in Santa Clara County and contracts out fabrication, assembly or test, ISO 9001 follows that work out of the building, and the certificate scope has to say so. The San Jose metro has 2,056 manufacturing establishments, 1,919 of them with fewer than 100 employees (US Census County Business Patterns, 2023), and 1,379 durable-goods wholesalers (BLS QCEW, 2024 annual averages). ISO 9001 is the most widely held ISO management system certification and the base that AS9100, ISO 13485 and the other sector standards build on.

ISO 9001 in San Jose: the full page → · Free ISO 9001:2026 gap analysis checklist · Free ISO 9001 internal audit checklist

ISO 45001 in San Jose

The San Jose metro has 2,056 manufacturing establishments (US Census County Business Patterns, 2023) and 4,413 construction establishments (BLS QCEW, 2024 annual averages). ISO 45001 turns a safety program into a management system, with hazard identification, worker participation and incident follow-up that a customer, general contractor or insurer can check.

ISO 45001 consultants →

ISO 27001 in San Jose

The San Jose metro has 4,839 computer systems design, software publishing and hosting establishments (BLS QCEW, 2024 annual averages). Software publishing employment here runs about 6.6 times its national share. ISO 27001 is the internationally recognized certification for an information security management system, and a common answer to enterprise customers' security questionnaires.

ISO 27001 consultants → · Free ISO 27001 internal audit checklist · ISO 27001 audit days calculator

AS9100 in San Jose

The San Jose metro has 23 aerospace product and parts establishments and 329 machine shops (BLS QCEW, 2024 annual averages). AS9100 adds aerospace requirements to ISO 9001, and it reaches machine shops and processors through the purchase orders of the aerospace companies they supply; distributors use AS9120.

AS9100 consultants → · Free AS9100 internal audit checklist

ISO 42001 in San Jose

The San Jose metro has 2,840 software publishers and custom programming firms (BLS QCEW, 2024 annual averages). ISO/IEC 42001 is the management system standard for organizations that develop or use AI, and it fits alongside an existing ISO 27001 system. See which state AI laws reference it.

ISO 42001 consultants →

ISO 13485 in San Jose

The San Jose metro has 192 medical equipment and electromedical device manufacturing establishments (BLS QCEW, 2024 annual averages). Medical equipment and supplies employment here runs about 1.6 times its national share. ISO 13485 is the quality management standard for medical devices, and since February 2, 2026 the FDA's Quality Management System Regulation incorporates it by reference.

ISO 13485 consultants → · Free ISO 13485 internal audit checklist · ISO 13485 audit days calculator

ISO 17025 in San Jose

The San Jose metro has 82 testing laboratories (BLS QCEW, 2024 annual averages). ISO/IEC 17025 is the accreditation standard for testing and calibration laboratories, including in-house labs whose results customers or regulators rely on.

ISO 17025 consultants →

What an engagement covers

  • RBA Code gap review Your current policies and records read against Section E's twelve management system elements and the Code's environment, health and safety sections.
  • ISO 14001 system build Environmental aspects, compliance obligations and objectives built so the same records answer a customer's self-assessment. See ISO 14001.
  • ISO 45001 with your IIPP inside it A safety management system that contains California's written Injury and Illness Prevention Program. See ISO 45001.
  • Integrated quality system ISO 9001 in the same system where your customer's purchase terms call for it, with one internal audit program across all three standards.
  • Labor and ethics extension Procedures and records for the RBA requirements that sit outside the ISO standards, inside the same document control and corrective action process.
  • Gap analysis and roadmap Two to four weeks, fixed scope and price, with a clear go or no-go before real money is committed.
  • Internal audit and management review Auditor-grade internal audits and a facilitated management review producing recorded decisions.

Questions we get from companies in this market

Does Applied Materials require ISO 14001 or ISO 45001 from suppliers?

Its published supply chain statement does not say so. It says Applied requires all members of its global supply chain to comply with its supplier standards and the RBA Code of Conduct, and describes self-assessments, policy reviews and third-party audits. The RBA Code requires a management system and lists ISO 14001 and ISO 45001 among its references, not as requirements. Your supplier agreement and purchase orders may say more, so read them.

Why would the RBA Code reach a small shop that does not sell to Applied directly?

Because the Code is designed to travel. It says that, at a minimum, participants should require their next-tier suppliers to acknowledge and implement it, and its management system section includes a process to communicate the Code to suppliers and monitor their compliance. A subsystem supplier that has accepted the Code from its customer can pass the same request to you.

Is an RBA audit the same as ISO certification?

No. An RBA audit assesses conformance to the RBA Code under the RBA's own program. ISO 14001 and ISO 45001 certification is issued by an accredited certification body against the ISO standard. The two overlap heavily in management system structure, which is why one well-built system can serve both, but neither substitutes for the other.

Is Lam Research in the San Jose metro?

No. Lam Research's headquarters is in Fremont, which is in Alameda County and part of the San Francisco-Oakland-Fremont metro. The San Jose metro is Santa Clara and San Benito Counties, which includes Santa Clara, Milpitas, Sunnyvale, Cupertino, Mountain View and Palo Alto.

What will certification cost?

How long does an RBA self-assessment take to answer with an ISO 14001 system in place? Our certification cost breakdown explains how audit days are set, so you can check any quote you receive.