Fresno, California
ISO consultants for Fresno processors, plants and their suppliers.
California's indoor heat rule asks for measurements, ranked controls, training and a written plan. In a Fresno food plant that is a safety management system, and ISO 45001 is the way to run it all year.
ISO certification consulting in Fresno at a glance
- Who we are
- Glocal Insight: senior ISO management system consultants working with Fresno companies on site and remotely. The consultant who scopes the work does the work.
- Standards
- ISO 9001, AS9100, ISO 14001, ISO 45001, ISO 27001, ISO 42001, ISO 13485, ISO 17025, plus internal audits, auditor training and ISO certification maintenance.
- Typical timeline
- For ISO 9001 at a company of 10 to 100 people, about three to four months from kickoff to the Stage 2 audit. Week by week.
- Cost
- A standalone gap analysis is typically in the low five figures; full implementation depends on scope. Certification body fees are separate. How certification costs are set, or estimate your audit days.
- Track record
- 100% certification success. 100% of surveyed clients would recommend us.
- Contact
- (816) 535-0738 or start a conversation.
Indoor heat is a management system problem
The Fresno metropolitan area is two counties, Fresno and Madera. It has 672 manufacturing establishments, 604 of them with fewer than 100 employees — 90% of the base — employing about 31,890 people (US Census County Business Patterns, 2023). The center of gravity is food: food manufacturing accounts for about 13,880 jobs at 2.5 times the national concentration, and fruit and vegetable preserving runs at about 6.8 times (BLS QCEW, 2024 annual averages).
Those plants run through long, hot summers. National Weather Service records for Fresno, going back to 1887, show no year with fewer than 73 days at 90°F or above, and as many as 142 in 2014. The average first 100-degree day falls on June 4 and the average last on September 10.
Since July 23, 2024, California has regulated that heat indoors. Title 8, section 3396, Heat Illness Prevention in Indoor Places of Employment, applies wherever an indoor work area reaches 82°F. Its full assessment and control duties start at 87°F, or at 82°F where workers wear clothing that restricts heat removal or work in a high radiant heat area. Cal/OSHA treats any workplace with a roof and enclosed sides as indoor.
For a Fresno plant this is not a summer memo. The rule asks for a measurement program, a ranked set of controls, trained people and a written plan. That is an occupational health and safety management system in miniature, and it is the reason ISO 45001 is the most useful standard for this metro's processors to start with.
Industry in Fresno
- The food manufacturing base 168 establishments in NAICS 311 employing about 13,880 people, 2.5 times the national concentration and nearly half of the metro's manufacturing jobs (BLS QCEW, 2024 annual averages)
- Fruit and vegetable preserving plants 30 establishments in NAICS 3114 employing about 3,730 people, about 6.8 times the national concentration (BLS QCEW, 2024 annual averages)
- Beverage manufacturers 51 establishments in NAICS 3121 employing about 1,680 people, about 1.7 times the national concentration (BLS QCEW, 2024 annual averages)
- Truck transportation 1,290 establishments in NAICS 484 employing about 7,310 people, more than 1.5 times the national concentration (BLS QCEW, 2024 annual averages)
- Machinery manufacturers 64 establishments in NAICS 333 employing about 2,620 people (BLS QCEW, 2024 annual averages)
What section 3396 asks for once the thresholds are reached
Measure, and keep the numbers. The employer measures both temperature and heat index where people work and records whichever is higher, along with other environmental risk factors. Measurements are taken when the rule reasonably may apply and during the period of greatest expected exposure, and again whenever conditions are expected to run 10 degrees or more above the last reading. Each record carries the date, time and specific location, is kept for 12 months or until the next measurement, whichever is later, and is available to employees, their representatives and Cal/OSHA.
Control in a fixed order. Engineering controls come first, and their target is specific: keep both temperature and heat index below 87°F, or below 82°F where restrictive clothing or radiant heat applies. Where that is infeasible, the employer gets as low as feasible and otherwise minimizes the risk. Administrative controls follow, then personal heat-protective equipment. Cal/OSHA's guidance says infeasibility is judged case by case at inspection.
Write it down and train to it. The plan must be written in English and in the language most of the workforce understands, kept at the worksite, and cover water, cool-down areas, measurement and controls, emergency response and acclimatization. Employees are trained before they are exposed, and supervisors receive the same training plus their own duties.
One point saves arguments later: air conditioning is not an exemption. The rule turns on the measured temperature and heat index in the work area. A conditioned building that holds below 82°F everywhere people work is outside the rule; one that does not, in a single room or on a single shift, is inside it for that area unless the exposure is only incidental: below 95°F and less than 15 minutes in any 60.
Where a Fresno plant crosses the 82-degree line
The 87-degree threshold gets the attention, but in a food plant the lower one is often the one that matters. A high radiant heat area is one where the globe temperature runs at least five degrees above the air temperature, and Cal/OSHA's guidance names machinery, stoves and ovens as radiant sources. A cook room or a line next to hot equipment can be under the full rule at 82°F while the packing hall beside it is not.
Clothing that restricts heat removal is the second trigger. The definition covers full-body clothing, arms, legs and torso, that is waterproof or protects against hazards or contamination; ordinary permeable knit or woven garments worn in place of street clothes are excepted. Full-body waterproof wash-down and sanitation gear fits that definition, so a sanitation crew wearing it comes under the full rule at 82°F even where the day shift in ordinary clothing does not.
The rule also reaches past the plant floor. The state's announcement named warehouses and manufacturing facilities among covered workplaces, and an employer with both indoor and outdoor work can be covered by both the indoor rule and the outdoor heat rule, section 3395. Truck transportation employs about 7,300 people in this metro at more than 1.5 times the national concentration (BLS QCEW, 2024), and Cal/OSHA's guidance says the short-exposure exception does not apply to vehicles without effective, functioning air conditioning.
Food plants in this metro also run on GFSI-benchmarked food safety schemes, which is specialist work outside our scope. The safety of the people working in those plants, and the quality systems of the companies that supply them, are what we do.
How the rule maps onto ISO 45001
Section 3396 does not mention ISO 45001, and a certificate does not satisfy it. What the standard gives you is a structure that already has a place for every element the rule asks for, so the heat program stops being a binder that comes out in June.
Hazard identification (clause 6.1.2) covers the physical work environment, so a heat survey by area and shift belongs in it. Legal requirements (6.1.3) are determined and kept current: section 3396, section 3395 where people work outdoors, and your Injury and Illness Prevention Program. The hierarchy of controls (8.1.2) runs elimination, substitution, engineering, administrative, then personal protective equipment, the same order the rule imposes.
Monitoring and measurement (9.1) expects measuring equipment that is calibrated or verified, which is the question an inspector will ask about your heat-index meter. Evaluation of compliance (9.1.2) makes someone check, on a schedule, that the readings were taken and the controls held. Competence and awareness (7.2, 7.3) carry the training duties, and emergency preparedness (8.2) carries the response procedure the plan has to contain.
The heat plan may be integrated into your Injury and Illness Prevention Program, and for most Fresno employers that is the right home for it. Our Los Angeles page explains how much of ISO 45001 the IIPP already covers. Engineering controls also use energy; if you run ISO 14001 alongside, cooling load belongs in your environmental aspects too.
The rest of the Fresno manufacturing base
Food is the concentration, not the whole picture. Manufacturing as a whole runs below the national share here, at about 0.75 times (BLS QCEW, 2024), and food accounts for nearly half of it. Beverage manufacturing adds about 1,680 jobs at 1.7 times the national concentration, and machinery manufacturing about 2,620.
The equipment builders, fabricators, packaging converters and maintenance contractors that serve food plants are ordinary ISO 9001 territory. A processor that audits its suppliers usually asks first for a documented quality system and evidence of control, and a certificate is the simplest single answer to that request. An integrated ISO 9001 and 45001 system shares document control, internal audit and management review, which keeps the cost of the second standard well below the first.
On the federal metropolitan definition, this market is Fresno and Madera counties. Kings County, home to Hanford and Corcoran, belongs to the wider combined statistical area but not to the metropolitan area, so figures that include it describe a larger market.
How we work with companies here
We work with Fresno companies on site and remotely, and we put the on-site days where being in the building changes the outcome: the heat survey walkthrough, the gap analysis, the first internal audit cycle and the certification audits.
We schedule the first heat walkthrough in the period of greatest expected exposure, because that is when the rule says to measure and when the numbers mean something. The most useful first meeting is a reading exercise: your Injury and Illness Prevention Program, your heat plan, and last summer's measurement records, if there are any.
The consultant who scopes the engagement does the work. No handoff to a junior implementer after the sale.
100% certification success. Every client we have taken to a Stage 2 certification audit has been certified, with no major nonconformities. 100% of surveyed clients would recommend us. Every client who answered our client satisfaction survey said they would recommend Glocal Insight.
ISO standards we help Fresno companies with
This page focuses on ISO 45001, and we can help Fresno companies with any of the standards below. If you are deciding whether to bring in outside help, start with what an ISO consultant does, how fees work and when certification is worth it.
ISO 45001 in Fresno
The Fresno metro has 672 manufacturing establishments (US Census County Business Patterns, 2023) and 2,214 construction establishments (BLS QCEW, 2024 annual averages). ISO 45001 turns a safety program into a management system, with hazard identification, worker participation and incident follow-up that a customer, general contractor or insurer can check.
The focus of this page. ISO 45001 consultants →
ISO 14001 in Fresno
In the San Joaquin Valley, equipment that emits air pollutants needs an Authority to Construct and a Permit to Operate from the Valley Air District, and the Valley is an Extreme nonattainment area for ozone. The Fresno metro has 93 establishments in chemical, plastics and rubber, paper, primary metal, and metal coating and finishing manufacturing (BLS QCEW, 2024 annual averages), the industries where air, water and waste obligations tend to be heaviest. ISO 14001 gives a site one system for its permits, its environmental aspects and its customers' sustainability questionnaires.
ISO 14001 in Fresno: the full page → · Free ISO 14001:2026 gap analysis checklist · Free ISO 14001 internal audit checklist
ISO 9001 in Fresno
Fresno County's agricultural production was worth $9.03 billion in 2024, by the county's own crop report. The equipment makers, fabricators and packaging suppliers that serve it are increasingly asked for a certified quality system. The Fresno metro has 672 manufacturing establishments, 604 of them with fewer than 100 employees (US Census County Business Patterns, 2023), and 526 durable-goods wholesalers (BLS QCEW, 2024 annual averages). ISO 9001 is the most widely held ISO management system certification and the base that AS9100, ISO 13485 and the other sector standards build on.
ISO 9001 in Fresno: the full page → · Free ISO 9001:2026 gap analysis checklist · Free ISO 9001 internal audit checklist
AS9100 in Fresno
The Fresno metro has 3 aerospace product and parts establishments and 34 machine shops (BLS QCEW, 2024 annual averages). AS9100 adds aerospace requirements to ISO 9001, and it reaches machine shops and processors through the purchase orders of the aerospace companies they supply; distributors use AS9120.
ISO 27001 in Fresno
The Fresno metro has 185 computer systems design, software publishing and hosting establishments (BLS QCEW, 2024 annual averages). ISO 27001 is the internationally recognized certification for an information security management system, and a common answer to enterprise customers' security questionnaires.
ISO 27001 consultants → · Free ISO 27001 internal audit checklist · ISO 27001 audit days calculator
ISO 42001 in Fresno
The Fresno metro has 80 software publishers and custom programming firms (BLS QCEW, 2024 annual averages). ISO/IEC 42001 is the management system standard for organizations that develop or use AI, and it fits alongside an existing ISO 27001 system. See which state AI laws reference it.
ISO 13485 in Fresno
The Fresno metro has 22 medical equipment and electromedical device manufacturing establishments (BLS QCEW, 2024 annual averages). ISO 13485 is the quality management standard for medical devices, and since February 2, 2026 the FDA's Quality Management System Regulation incorporates it by reference.
ISO 13485 consultants → · Free ISO 13485 internal audit checklist · ISO 13485 audit days calculator
ISO 17025 in Fresno
The Fresno metro has 24 testing laboratories (BLS QCEW, 2024 annual averages). ISO/IEC 17025 is the accreditation standard for testing and calibration laboratories, including in-house labs whose results customers or regulators rely on.
What an engagement covers
- Heat survey and measurement program Area-by-area and shift-by-shift readings of temperature and heat index, radiant heat and clothing triggers identified, and a measurement schedule that produces the records section 3396 requires.
- Written heat plan inside your IIPP A plan covering water, cool-down areas, measurement and controls, emergency response and acclimatization, integrated into your Injury and Illness Prevention Program rather than filed beside it.
- ISO 45001 system build Hazard identification, legal register, hierarchy of controls, calibrated monitoring and compliance evaluation, built so heat is one of the hazards the system runs. See ISO 45001.
- ISO 9001 for food-industry suppliers Quality systems for the fabricators, equipment builders and converters that supply processors, sharing one document and audit structure with ISO 45001.
- Supervisor and crew training Training delivered before exposure, in the languages your workforce uses, with supervisor duties covered separately. See training.
- Gap analysis and roadmap Two to four weeks, fixed scope and price, with a clear go or no-go before real money is committed.
- Internal audit and management review Auditor-grade internal audits, including a summer compliance check of heat records and controls, and a management review that produces recorded decisions.
Questions we get from companies in this market
Does Cal/OSHA's indoor heat rule apply to our Fresno plant?
It applies to any indoor work area where the temperature reaches 82°F, and Cal/OSHA counts any workplace with a roof and enclosed sides as indoor. The full assessment and control duties apply at 87°F temperature or heat index, or at 82°F where workers wear clothing that restricts heat removal or work in a high radiant heat area, such as near ovens or hot machinery. The only way to know is to measure in the areas where people work, during the hottest expected conditions.
Our building is air-conditioned. Are we exempt?
Not automatically. Section 3396 has no air-conditioning exemption; it turns on the measured temperature and heat index in each work area. If every area where people work stays below 82°F, the rule does not apply there. If a cook room, a dock, a mezzanine or a night sanitation shift runs above it for more than incidental exposures (below 95°F and under 15 minutes in any 60), the rule applies to that area, and the records should show you checked.
Can our indoor heat plan be part of our IIPP?
Yes. The rule allows the written plan to be integrated into the Injury and Illness Prevention Program required by section 3203, or into an outdoor heat plan, or kept separately. It must be written in English and in the language most of your employees understand, and kept at the worksite.
Does ISO 45001 certification satisfy the indoor heat standard?
No. Cal/OSHA enforces section 3396 and the rule does not mention ISO 45001. What the standard requires is that you identify your legal requirements, control hazards in hierarchy order, monitor with calibrated or verified equipment and evaluate your own compliance. A system built that way produces the measurements, plan and training records the rule asks for, and a certification auditor will sample them.
Is Madera County part of the Fresno metro?
Yes. On the federal metropolitan definition, the Fresno metro is Fresno and Madera counties, with 672 manufacturing establishments, 604 of them with fewer than 100 employees, employing about 31,890 people (US Census County Business Patterns, 2023). Kings County belongs to the wider combined statistical area but not to the metropolitan area.
What will ISO 45001 certification cost?
Audit days are set from the number of people within your certification scope against a published table, then adjusted for factors such as hazard level, system maturity and multiple sites. A food plant with seasonal headcount should agree with its certification body how seasonal workers are counted before the audit is quoted. Our certification cost breakdown explains how audit days are set.