Skip to content

Bakersfield, California

ISO consultants for Kern County oil field contractors and manufacturers.

Drilling and production in California run under Cal/OSHA's Petroleum Safety Orders, which take precedence over the other safety orders and stop where custody changes. An ISO 45001 system here starts with that boundary.

ISO certification consulting in Bakersfield at a glance

Who we are
Glocal Insight: senior ISO management system consultants working with Bakersfield companies on site and remotely. The consultant who scopes the work does the work.
Standards
ISO 9001, AS9100, ISO 14001, ISO 45001, ISO 27001, ISO 42001, ISO 13485, ISO 17025, plus internal audits, auditor training and ISO certification maintenance.
Typical timeline
For ISO 9001 at a company of 10 to 100 people, about three to four months from kickoff to the Stage 2 audit. Week by week.
Cost
A standalone gap analysis is typically in the low five figures; full implementation depends on scope. Certification body fees are separate. How certification costs are set, or estimate your audit days.
Track record
100% certification success. 100% of surveyed clients would recommend us.
Contact
(816) 535-0738 or start a conversation.

The safety orders written for the oil field

The Bakersfield-Delano metropolitan area is one county: Kern. It has 402 manufacturing establishments, 380 of them with fewer than 100 employees — 95% of the base — employing about 14,857 people (US Census County Business Patterns, 2023). Manufacturing runs at under half the national concentration here. The work that defines Kern is in the oil fields: support activities for oil and gas operations employ about 3,480 people at 7.1 times the national concentration, and mining as a whole, oil and gas included, employs about half as many people as all of Kern's manufacturing (BLS QCEW, 2024 annual averages).

That work runs under its own rulebook. California has had petroleum safety orders since 1945, and since 1952 drilling and production have had a subchapter of their own: Cal/OSHA's Petroleum Safety Orders—Drilling and Production, Subchapter 14 of Title 8.

Section 6502 says what makes them different. For crude oil and natural gas drilling and production, these orders take precedence over the other safety orders. Section 6503 extends them to well servicing, rig building, pipelines on the lease, tank storage, blending and the separation of crude from water and gas, and the building and maintenance of the equipment that does all of it.

For an oil field contractor building an ISO 45001 system, that settles where the legal register starts. Not with the general industry orders that most safety templates are written around, but with Subchapter 14, and then with the boundary where Subchapter 14 stops.

Industry in Bakersfield

  • Oil and gas support contractors 98 establishments and about 3,480 jobs in support activities for oil and gas operations, about 7.1 times the national concentration (BLS QCEW, 2024 annual averages).
  • Crude oil and gas extraction 33 establishments and about 1,235 jobs, about 4.5 times the national concentration (BLS QCEW, 2024).
  • Petroleum refineries 14 establishments and about 724 jobs, about 5.1 times the national concentration (BLS QCEW, 2024).
  • Aerospace product and parts makers 26 establishments and about 1,747 jobs, about 1.4 times the national concentration (BLS QCEW, 2024).
  • Cal/OSHA Petroleum Safety Orders Subchapter 14 of Title 8 governs drilling and production and takes precedence over the other safety orders for that work (section 6502).

Where the petroleum orders start and stop

Section 6503 draws the line. Production of crude oil or natural gas ends where it leaves the last producing facility, changes custody, or, for gas, enters a natural gasoline plant. The section carries diagrams comparing that reach with the separate Petroleum Safety Orders for Refining, Transportation and Handling.

For a Kern service company that matters job by job. A crew servicing wells on a lease, a crew maintaining lease tanks and a crew working past the custody transfer point can be under different orders on the same day. The orders also follow the equipment: under section 6502(c), when petroleum drilling or servicing equipment is used on a well that is not a petroleum well, the applicable sections still apply.

Two other rules mark the edges. California's process safety management rule, section 5189, expressly does not apply to oil or gas well drilling or servicing operations, so a contractor that also works inside a covered process plant carries two different sets of obligations. And Subchapter 14 does not replace the general Injury and Illness Prevention Program: section 6507 requires one, built to section 3203. Our Los Angeles page explains how far a sound IIPP already goes toward ISO 45001.

In ISO 45001 terms, this is the compliance obligations step done properly: one register, organized by type of site and type of work, with the governing orders identified for each.

The permit on the well site is part of your safety system

Section 6691 is a good example of how these orders work. For well operations that require a permit from the state's oil and gas division, the blowout prevention equipment must meet the equipment class named in that permit. A copy of the permit has to be posted or otherwise readily available at the well site. The equipment requirements come from the division's Manual M07, sixth edition, 1987, which the rule incorporates by reference, and the equipment must be used and maintained to M07 and the manufacturer's recommendations.

The rule still names the Division of Oil, Gas, and Geothermal Resources. The state's oil and gas regulator now signs its orders as the Geologic Energy Management Division, CalGEM. Either way, the permit issued for the well sets a safety requirement that Cal/OSHA enforces.

That makes the well permit a controlled document in your safety system, not paperwork that lives in the operator's office. The crew needs the current permit, the equipment class it names, and evidence that the stack on site matches it. The same section sets physical requirements, including a clear passage to the blowout preventer controls at least two feet wide with six and a half feet of vertical clearance, and controls labeled by function.

Section 6531 adds a competence requirement. Tests for flammable or toxic gases and vapors required by the orders must be made by a qualified person with approved devices or by chemical analysis. The rule does not define qualified, so your system has to: who may test, on what instruments, with what training and calibration. That is exactly what ISO 45001's competence and monitoring requirements ask you to decide and record.

Heat is a written-plan obligation in the oil field

Cal/OSHA's outdoor heat rule, section 3395, covers all outdoor places of employment, with shade required above 80°F. Its high-heat procedures, which start at 95°F, apply to a short list of industries, and oil and gas extraction is on it. The heat illness prevention plan must be written, in English and in the language understood by the majority of employees.

In a Kern summer, that is not a seasonal memo. It is an operational control with a trigger, a procedure and records, and it belongs in the same ISO 45001 system as the petroleum orders.

The rest of the Kern base

Oil does not end at the wellhead here. Petroleum refineries employ about 724 people in Kern at about five times the national concentration, cement plants about 416 at twelve times, and aerospace product and parts makers about 1,747 across 26 establishments (BLS QCEW, 2024). Snack food manufacturing employs about 1,743 at nearly twelve times.

Those businesses buy from the same local fabrication and service base, and some customers ask suppliers for an ISO 9001 system. Where an aerospace customer flows AS9100 down, that is work we support. Where an operator or equipment buyer asks for API Spec Q1, that is specialist work outside our scope.

For companies whose permits and discharges are the bigger risk, an ISO 14001 system can run beside the safety system with one shared document control and internal audit program.

How we work with companies here

We work with Bakersfield companies on site and remotely, and we put the on-site days where being in the building, or on the lease, changes the outcome: the gap analysis walkthrough, the first internal audit cycle and the certification audits.

The most useful first meeting here is a sorting exercise: every type of job your crews do, which safety orders govern it, where custody changes, and which permits and plans have to travel with the crew. That settles the shape of the system before anyone prices it.

The consultant who scopes the engagement does the work. No handoff to a junior implementer after the sale.

100% certification success. Every client we have taken to a Stage 2 certification audit has been certified, with no major nonconformities. 100% of surveyed clients would recommend us. Every client who answered our client satisfaction survey said they would recommend Glocal Insight.

ISO standards we help Bakersfield companies with

This page focuses on ISO 45001, and we can help Bakersfield companies with any of the standards below. If you are deciding whether to bring in outside help, start with what an ISO consultant does, how fees work and when certification is worth it.

ISO 45001 in Bakersfield

The Bakersfield metro has 402 manufacturing establishments (US Census County Business Patterns, 2023) and 1,424 construction establishments (BLS QCEW, 2024 annual averages). ISO 45001 turns a safety program into a management system, with hazard identification, worker participation and incident follow-up that a customer, general contractor or insurer can check.

The focus of this page. ISO 45001 consultants →

ISO 9001 in Bakersfield

The Bakersfield metro has 402 manufacturing establishments, 380 of them with fewer than 100 employees (US Census County Business Patterns, 2023), and 374 durable-goods wholesalers (BLS QCEW, 2024 annual averages). ISO 9001 is the most widely held ISO management system certification and the base that AS9100, ISO 13485 and the other sector standards build on.

ISO 9001 consultants → · Free ISO 9001:2026 gap analysis checklist · Free ISO 9001 internal audit checklist

ISO 14001 in Bakersfield

The Bakersfield metro has 62 establishments in chemical, plastics and rubber, paper, primary metal, and metal coating and finishing manufacturing (BLS QCEW, 2024 annual averages), the industries where air, water and waste obligations tend to be heaviest. ISO 14001 gives a site one system for its permits, its environmental aspects and its customers' sustainability questionnaires.

ISO 14001 consultants → · Free ISO 14001:2026 gap analysis checklist · Free ISO 14001 internal audit checklist

AS9100 in Bakersfield

The Bakersfield metro has 26 aerospace product and parts establishments and 28 machine shops (BLS QCEW, 2024 annual averages). AS9100 adds aerospace requirements to ISO 9001, and it reaches machine shops and processors through the purchase orders of the aerospace companies they supply; distributors use AS9120.

AS9100 consultants → · Free AS9100 internal audit checklist

ISO 27001 in Bakersfield

The Bakersfield metro has 148 computer systems design, software publishing and hosting establishments (BLS QCEW, 2024 annual averages). ISO 27001 is the internationally recognized certification for an information security management system, and a common answer to enterprise customers' security questionnaires.

ISO 27001 consultants → · Free ISO 27001 internal audit checklist · ISO 27001 audit days calculator

ISO 42001 in Bakersfield

The Bakersfield metro has 58 software publishers and custom programming firms (BLS QCEW, 2024 annual averages). ISO/IEC 42001 is the management system standard for organizations that develop or use AI, and it fits alongside an existing ISO 27001 system. See which state AI laws reference it.

ISO 42001 consultants →

ISO 13485 in Bakersfield

The Bakersfield metro has 13 medical equipment and electromedical device manufacturing establishments (BLS QCEW, 2024 annual averages). ISO 13485 is the quality management standard for medical devices, and since February 2, 2026 the FDA's Quality Management System Regulation incorporates it by reference.

ISO 13485 consultants → · Free ISO 13485 internal audit checklist · ISO 13485 audit days calculator

ISO 17025 in Bakersfield

The Bakersfield metro has 18 testing laboratories (BLS QCEW, 2024 annual averages). ISO/IEC 17025 is the accreditation standard for testing and calibration laboratories, including in-house labs whose results customers or regulators rely on.

ISO 17025 consultants →

What an engagement covers

  • Petroleum safety orders register A compliance obligations register that starts with Subchapter 14, maps each type of work to the orders that govern it, and marks the custody boundary.
  • ISO 45001 system for field crews An occupational health and safety system built for crews that move between leases, yards and customer plants. See ISO 45001.
  • Well permit and equipment control Document control for well permits and the equipment classes they name, with on-site evidence that equipment matches.
  • Qualified-person competence Written criteria, training and instrument calibration records for the people who test for gases and vapors.
  • Heat illness plan as an operational control Section 3395 high-heat procedures written into the system with triggers, responsibilities and records.
  • Gap analysis and roadmap Two to four weeks, fixed scope and price, with a clear go or no-go before real money is committed.
  • Internal audit and management review Auditor-grade internal audits and a facilitated management review that produces recorded decisions.

Questions we get from companies in this market

Do Cal/OSHA's general industry orders or the Petroleum Safety Orders apply to our Kern oil field crews?

For crude oil and natural gas drilling and production, section 6502 says the Petroleum Safety Orders—Drilling and Production take precedence over the other safety orders. Section 6503 extends them to well servicing, rig building, pipelines on the lease, tank storage, blending and separation, and building and maintaining that equipment. Production ends where crude leaves the last producing facility or changes custody, so work beyond that point can fall under other orders.

Does California's process safety management rule apply to well servicing?

No. Section 5189 lists exceptions to its application, and oil or gas well drilling or servicing operations are among them. A contractor that also works inside a process plant covered by the rule still has to meet the plant's requirements there, so the two kinds of work need separate entries in your compliance register.

Does the outdoor heat rule's high-heat section cover oil field work?

Yes. Section 3395 lists oil and gas extraction among the industries that must follow its high-heat procedures when the temperature reaches 95°F. Shade is required above 80°F at any outdoor workplace, and the heat illness prevention plan must be written in English and in the language understood by the majority of employees.

Does any California rule require ISO 45001 for oil field contractors?

No. The Petroleum Safety Orders do not name ISO 45001. Whether a customer asks for a certificate is a contract question, so read your master service agreement. What ISO 45001 does well here is organize the obligations the orders already impose: the register, the competence records, the permit control and the audits that prove they work.

How many manufacturers are in the Bakersfield metro?

On the federal metropolitan definition, which is Kern County alone, 402 manufacturing establishments, 380 of them with fewer than 100 employees, employing about 14,857 people (US Census County Business Patterns, 2023). Oil and gas extraction and its support contractors are classified outside manufacturing, so they are not in that count.

What will ISO 45001 certification cost?

Audit days are set mainly from the number of people within your certification scope, then adjusted for factors such as system maturity and the number of sites. Field crews spread across many leases make the scope and sampling decision important. Our certification cost breakdown explains how audit days are set, and the audit days calculator gives an estimate.