Skip to content

Guide · ISO/IEC 17025 accreditation

What ISO 17025 accreditation costs, fee by fee.

ISO/IEC 17025 accreditation costs an application fee, an annual fee and assessment fees from the accreditation body, plus proficiency testing, calibration and your staff's time. NVLAP, for example, publishes $1,000 to apply and $5,750 a year before assessment fees. How long it takes depends on your scope and on how quickly your lab can produce the evidence assessors check. Here are the published fee schedules, how the other bodies quote, and every step to accreditation.

Last verified October 30, 2026

The right word
Accredited, not certified. An accreditation body assesses your technical competence, method by method.
What sets the fee
Your scope: the tests or calibrations you list set the assessor days.
The cost that never stops
Proficiency testing, every year, on top of the annual fee.
Where most projects start
A gap analysis. Ours is typically in the low five figures.

Every cost, itemized

This is the full list for a laboratory seeking accreditation for the first time. Some lines are optional. Most of them recur: the annual fee, proficiency testing, calibration and reassessment continue for as long as you hold the accreditation.

Cost Who you pay When What sets the amount
The standard itself A standards seller Before you start ISO/IEC 17025:2017 is the current edition, confirmed by ISO in 2023. ISO lists it at CHF 179.
Gap analysis Consultant (optional) First How many methods and parameters are in the proposed scope, and how much validation and uncertainty work is already on file.
System build and technical work Consultant (optional) After the gap analysis Management system, method validation or verification, uncertainty budgets, traceability and competence records.
Your team's time Your payroll Throughout, then every year Analysts and technicians generating validation data, a quality lead running the system, management for the review.
Equipment calibration Calibration providers Before assessment, then on your intervals How many instruments affect reported results, and their calibration intervals.
Proficiency testing Proficiency testing provider Before assessment, then every year Number of disciplines or sub-areas in scope. ANAB puts a single program at a few hundred dollars to more than $1,000.
Application Accreditation body When you apply A fixed fee at some bodies ($1,000 at NVLAP), none at others (PJLA).
Annual fee Accreditation body Every year A fixed program fee at bodies that publish one ($5,750 at NVLAP), often adjusted for scope.
Assessment Accreditation body Initial, then on the body's cycle Assessor days, which follow the size and complexity of your scope, times the rate, plus assessor travel.
Corrective action review and follow-up Accreditation body After each assessment How many findings you get. ANAB quotes exclude corrective action review time; NVLAP bills repeat visits at its regular rate.
Scope extensions Accreditation body When you add methods An administration fee, plus assessor time if data review or a visit is needed.

What accreditation bodies publish about their fees

There is no audit-day table for laboratories like the one used for ISO 9001. Each accreditation body sets its own fees. Two publish amounts; the others quote to your scope and tell you what the quote is built from. Ask every body for the same thing: the full cost across one accreditation cycle, not just year one.

Accreditation body Publishes amounts? Application Annual Assessment
NVLAP (NIST) Yes, on NIST's site $1,000, one time, non-refundable $5,750 administrative and technical support fee, every year Variable by program; fixed for some (for example, $5,430 for thermal insulation materials, $5,850 for efficiency of electric motors). Preassessment visits are extra; monitoring visits are not charged separately.
CALA (Canada) Yes, fee schedule in CAD, effective January 1, 2025 CAD 970 application review, new laboratory CAD 4,805 accreditation maintenance, plus CAD 107 per appendix Assessor expenses, with a CAD 1,000 deposit per assessor; pre-assessment CAD 1,630 plus expenses; scope extension without a visit CAD 540 plus CAD 189 per appendix.
A2LA No; free, non-binding estimate on request In the estimate In the estimate Cost varies with the size of the organization, the size of the scope and readiness for assessment. A2LA states it charges no document fees.
ANAB No; quote on request In the quote In the quote On-site days vary with the complexity of the proposed scope. Quotes exclude actual travel costs, assessor travel time and corrective action review time.
IAS No; quote through its customer portal Paid with the application In the quote An assessment team is selected to match the requested scope after IAS reviews the management system and scope.
PJLA No; quote on request None In the quote Built from a daily rate, overhead and travel. An estimate should cover document review, any preliminary assessment, the assessment, travel and surveillance.

NVLAP's on-site fee may change with the scope or for a laboratory outside the United States, and its annual fee is due whatever the accreditation status. CALA's amounts are in Canadian dollars before tax. Check the current schedule before you budget: both bodies revise them.

Scope: the number that drives every fee

Your scope of accreditation lists the specific tests or calibrations the body found you competent to perform. Anything not on it is not covered, and you can apply for as many or as few as you choose. Every line you add needs validation or verification data, an uncertainty budget where results are quantitative, traceable calibration and proficiency testing coverage, and it adds assessor time. For calibration labs, the scope also states ranges and calibration and measurement capabilities.

The cheapest scope is the one your customers actually require. Start there, and add methods by scope extension once the system is running.

Proficiency testing: before and after accreditation

Proficiency testing is the external check that your results agree with other laboratories'. It is a separate bill from a proficiency testing provider, and the accreditation body sets how much you need. ANAB's rules show the pattern:

  • Before the initial assessment, participation in at least one discipline from the proposed scope, where possible. Results may still be pending.
  • Within six months of accreditation, results must reach ANAB, or the lab can be suspended until they do.
  • Every calendar year after accreditation, at least one proficiency test or interlaboratory comparison.
  • Every four years, each major sub-area of the scope covered at least once.

A2LA, in most cases, requires at least one proficiency testing activity before accreditation and publishes its full rules in one requirements document. Where no commercial program exists for a test, ANAB can approve an alternative. Price proficiency testing per sub-area per year, then multiply across the cycle.

The timeline: what has to exist before the assessment

No rule sets a calendar for accreditation. The bodies set evidence, and the evidence takes time to produce. Before assessors arrive, expect to have:

  1. A full internal audit. PJLA requires a full system internal audit before its assessors arrive. A2LA expects records of the results and the follow-up actions, by a qualified auditor; a third-party audit does not count.
  2. A full management review. Held by top management before the assessment, with its record.
  3. Proficiency testing. ANAB requires participation in at least one discipline of the proposed scope before the initial assessment, where possible; results may still be pending. A2LA, in most cases, requires at least one proficiency testing activity before accreditation.
  4. Measurement uncertainty data. Uncertainty budgets for the methods in scope. A2LA names uncertainty problems among the common causes of delay.
  5. Your documented system, early. PJLA requires documentation at least 30 days before the assessment, including the last internal audit, management review, proficiency testing results and uncertainty data.

Once you apply, the body's process has its own pace. A2LA says a well-prepared application avoids the common delays (incomplete packages, uncertainty budget problems, slow responses to findings); after an assessment with no nonconformities, accreditation can follow within days. ANAB keeps current customers' assessment schedules about 120 days ahead and usually confirms dates 30 to 60 days in advance, so book early.

Step by step, from scope to accreditation

  1. Define the scope. List the tests or calibrations, methods, matrices and ranges you want accredited. The scope is what customers will check, and anything not on it is not covered.
  2. Run a gap analysis. Compare the lab's current system and technical records with ISO/IEC 17025:2017 and the chosen body's own requirements.
  3. Choose an accreditation body and get quotes. In the US, A2LA, ANAB, IAS, PJLA and NVLAP among others; in Canada, CALA and SCC. Compare scope fit, what your customers or regulators accept, and the full cost across the cycle.
  4. Enroll in proficiency testing. Do it early. A2LA notes that enrollment can take several weeks.
  5. Build the system and the technical evidence. Management system, validation or verification, uncertainty budgets, calibration and traceability, and staff competence records.
  6. Run it, audit it, review it. Operate under the system, then complete the internal audit and management review.
  7. Apply and submit documents. The body checks the application, proposes assessors (you can raise a conflict of interest at A2LA), and reviews your documents before the visit.
  8. Optional preliminary assessment. Offered by A2LA, ANAB and PJLA, among others. NVLAP and CALA charge for it separately.
  9. Assessment. Assessors examine records, sample handling and reporting, interview technicians, and watch tests or calibrations being performed.
  10. Corrective action. You answer each nonconformity. PJLA allows 60 days. A2LA states that it typically reviews responses within a week.
  11. Accreditation decision. Made by the body, not the assessors: at A2LA a panel of its Accreditation Council, at PJLA its Executive Committee. You receive the certificate and the scope of accreditation.
  12. Keep it. Proficiency testing every year, surveillance and reassessment on the body's cycle, and scope extensions as you add methods.

Accreditation by a body that signs the Global ACI mutual recognition arrangement is recognized by the other signatories. Global ACI took over the ILAC arrangement on January 1, 2026, and existing accreditations were not affected. To check a laboratory's accreditation and scope, use the accreditation body's directory; our guide to verifying an ISO certificate or lab accreditation lists them.

Start with a number you can trust

A gap analysis turns this page into your budget. It fixes the scope your customers need, lists the validation, uncertainty and proficiency testing work still to do, and gives you a plan to an application date. A standalone gap analysis from us is typically in the low five figures, and every engagement after it is priced to its scope. We are headquartered in the Kansas City metro, working with laboratories across the US and Canada, on site and remotely. The difference between the two words is set out in our glossary entry on accreditation and certification.

Talk through your scope

Common questions

How much does ISO 17025 accreditation cost?

It depends mostly on your scope. Accreditation body fees have four parts: application, an annual fee, assessment (assessor days plus travel) and follow-up. NVLAP publishes its fees: $1,000 to apply and $5,750 a year, with assessment fees on top. CALA publishes CAD 970 to apply and CAD 4,805 a year plus CAD 107 per appendix. A2LA, ANAB, IAS and PJLA quote to your scope. Add proficiency testing, which ANAB puts at a few hundred dollars to more than $1,000 per program, equipment calibration and your staff's time. A standalone gap analysis from us is typically in the low five figures.

How long does it take to get ISO 17025 accredited?

Two clocks run. The first is yours: building the system and producing the records the assessors need, including a full internal audit, a management review, proficiency testing and uncertainty data. The second is the accreditation body's process from application to decision. A2LA notes that after an assessment with no nonconformities, accreditation can follow within days. Incomplete applications, weak uncertainty budgets and slow responses to findings are the usual delays.

How do you get ISO 17025 accredited?

Define the tests or calibrations you want on the scope, run a gap analysis, build the management system and the technical evidence, enroll in proficiency testing, then complete an internal audit and a management review. Apply to an accreditation body, pass document review and the assessment, answer any nonconformities, and the body's decision panel grants accreditation for the scope it assessed.

What is the ISO 17025 accreditation process?

Application, document review, an optional preliminary assessment, the assessment itself, corrective action and the accreditation decision. During the assessment, assessors review records and sample handling, interview technicians and watch tests or calibrations being performed. After accreditation, the lab takes part in proficiency testing every year and is reassessed on the body's cycle. At PJLA, the first surveillance is due 12 months after the initial assessment; at NVLAP, on-site assessments come in the first renewal year and every two years after that.

Is it ISO 17025 certification or accreditation?

Accreditation. Laboratories are accredited to ISO/IEC 17025 by an accreditation body, which assesses technical competence for each test or calibration on the scope as well as the management system. Certification, as with ISO 9001, verifies a management system and does not normally assess technical competence. A lab that calls itself ISO 17025 certified is using the wrong word, and a customer should check its scope in the accreditation body's directory.

Is ISO 17025 accreditation worth it?

When customers or regulators must accept your results, it usually is not optional. Accreditation also lets your reports be recognized abroad: accreditation bodies that sign the Global ACI mutual recognition arrangement, which replaced the ILAC arrangement on January 1, 2026, recognize each other's accreditations. For an in-house lab with no outside demand, compare the yearly cost of fees, proficiency testing and reassessment with the value of results that hold up in a dispute.

Related

Sources

Changelog

  • 2026-10-30 — Published. Fees from NVLAP's fee structure (NIST) and CALA's fee schedule; quoting, process and proficiency testing rules from A2LA, ANAB, IAS and PJLA; Global ACI's mutual recognition arrangement from NATA; standard status from ISO.