Skip to content

Guide · ISO 45001 certification

ISO 45001 certification: cost, timeline and steps.

ISO 45001 certification costs two bills plus your team's time: the certification body's audits, priced by audit days that depend on the people in scope, contractors included, and on how hazardous your work is, and any outside help you buy to prepare. How long it takes depends on records: the certification body has to see your system running, including an internal audit and a management review, before it certifies. To get certified, you scope the system, close regulatory gaps, build it with your workers around your hazards, run it, and pass a two-stage audit.

Last verified October 30, 2026

What sets the audit fee
People in scope, contractors included, and your OH&S risk category, times the day rate.
Example
26 to 45 people: 7 initial audit days at high risk, 4 at low, before adjustments.
What sets the timeline
Records, an internal audit and a management review, all before the certification body can certify.
Not the same as
OSHA SHARP or VPP. Those are OSHA recognition programs, evaluated by OSHA or its consultation offices.

Every cost, itemized

This is the full list for a company certifying to ISO 45001 for the first time. Some lines are optional. None of them stop when the certificate arrives: it runs for three years, and the audits and the internal work continue every year.

Cost Who you pay When What sets the amount
The standard itself A standards seller Before you start One copy of ISO 45001:2018 with Amendment 1:2024 for the person who owns the system.
Gap analysis Consultant (optional) First Sites, hazards, the regulator for each site, and how much of your safety program already runs.
System build and implementation support Consultant (optional) After the gap analysis How much of your hazard control, worker participation and incident investigation already works, and how much your team carries.
Your team's time Your payroll Throughout, then every year A system owner, supervisors, worker participation time, and top management for the management review.
Training Training provider or consultant Before the Stage 2 audit Awareness for everyone in scope, internal auditor training, and any regulatory training that is overdue.
Closing regulatory gaps Varies Before Stage 2 The certification body will look at legal compliance. Missing programs that your regulator already requires have to be fixed first.
Stage 1 and Stage 2 audits Certification body When the system has run long enough to produce records Audit days from Table OH&SMS 1 for your headcount, contractors included, and your risk category, times the day rate.
Surveillance audits Certification body At least once each calendar year About one third of the initial audit time. The first falls within 12 months of the certification decision.
Recertification Certification body Before the three-year certificate expires About two thirds of the time a fresh initial audit would need at that point.

Certification body audit days for ISO 45001

Accredited certification bodies set audit time from Global ACI-TECH-3-004, the document long known as IAF MD 5. For ISO 45001 its table has three columns, one for each OH&S risk category, against the effective number of people within the scope of the certificate. The figures are for the initial audit, Stage 1 and Stage 2 combined.

For example, at 86 to 125 people a high-risk operation starts at 11 days and a low-risk, office-based one at 5.5: the risk category can double the audit fee at the same headcount. For your own headcount and risk category, or an audit combined with ISO 9001 or ISO 14001, use our ISO audit days calculator.

Which risk category you are in

The category comes from the nature and severity of your OH&S risks, and the document links it to business sectors. A certification body can place a specific organization lower than its sector suggests, but it has to document why.

  • High: significant risks where a failure could cost a life, as in construction, heavy manufacturing, mining and chemicals.
  • Medium: some significant risks, as in most light manufacturing and assembly.
  • Low: low risks, as in office-based work and most services.

Rules that apply only to ISO 45001 audits

  • Contractors count. For ISO 45001, the effective number of personnel includes contractor and subcontractor workers whose work you control or influence and who can affect your OH&S performance. A site with 40 employees and 30 regular contractors may be audited as a site of 70.
  • Two shifts in the first cycle. During the first certificate cycle, the certification body must audit at least one shift during regular office hours and one outside them. Later surveillance audits can drop the second shift where maturity justifies it, with the reasons recorded.
  • Fewer headcount reductions. Reducing the count for temporary unskilled workers is in principle not applicable for ISO 45001, because they can create OH&S risks. Reducing for repetitive jobs needs a documented OH&S risk assessment.
  • Limits on remote auditing. Remote activity is limited to reviewing documents and records and interviewing staff and workers. Process control and OH&S risk control cannot be audited remotely.
  • Contractor interviews. Contractor personnel working on in-scope processes at your premises must be interviewed about their OH&S awareness, and your controls over outsourced work are audited.
  • Temporary sites. Construction and field-service companies have temporary sites in the audit program. The sample reflects the scope, hazards, risks and project stages, and remote alternatives cannot replace witnessing risk control.

What moves the number

Time can go up for the views of interested parties, an accident or occupational disease rate above your sector's average, members of the public on site, OH&S legal proceedings, a large temporary presence of contractors such as a plant shutdown, dangerous substances in quantities that create a major accident risk, and sites in other countries where the legislation and language are not well known.

Time can come down for a very small site for its headcount, a mature system, prior certification under another voluntary OH&S scheme, or periodic audits by a national authority under a mandatory scheme. Reductions are capped at 30% of the starting figure.

The three-year cycle, worked through

Take a single site with 45 employees and 15 regular contractors in a medium-risk sector, no adjustments. Counted together that is 60 people, so the initial audit is 6 days. Each surveillance audit is about a third, 2 days. Recertification is about two thirds of what an initial audit would need at that point, about 4 days if the scope has not changed. Multiply each by the day rate and add any travel and fees in the quote. Our certification cost guide explains day rates and how to check a quote's arithmetic.

Your team's time: the line no quote prices

  • A system owner with the authority to make decisions and regular time every week.
  • Supervisors, who carry most hazard controls, inspections and incident investigations.
  • Workers, for hazard identification, consultation, awareness training and audit interviews, on every shift in scope.
  • Top management, who take part in the management review and will be interviewed.
  • Internal auditors trained to audit areas other than their own.

The less of that your team can carry, the more outside help you buy. A standalone gap analysis from us is typically in the low five figures, and every engagement after it is priced to its scope. Our guide to choosing an ISO 45001 consultant covers regulator knowledge, worker participation, impartiality and a scorecard.

The timeline: what must exist before Stage 2

What sets the floor is the evidence an accredited certification body has to see under ISO/IEC 17021-1. At Stage 1 it checks your readiness, including whether internal audits and management reviews are planned and being performed. At Stage 2 it evaluates whether the system is implemented and effective, including legal compliance and operational control. Before you book Stage 2, have these in hand:

Evidence Why the auditor needs it
Hazards identified and risks assessed, with controls in place The auditor will pick a hazard and follow it to the control, the training of the people exposed, and the inspection or monitoring that shows it works.
Your legal requirements, site by site, with compliance evaluated Stage 2 looks at legal compliance. The auditor will ask which regulator governs each site and how you know you comply.
Evidence of worker consultation and participation Auditors interview workers, not just managers. Records of safety meetings or committee work help, but what workers say carries the weight.
Incident and near-miss records, with investigations The auditor will check that incidents were investigated for cause and that corrective actions were carried out.
At least one internal audit Stage 1 checks that internal audits are planned and being performed.
At least one management review The same Stage 1 check applies to management review. Top management takes part, and the auditor will ask them about it.

The interval between Stage 1 and Stage 2 depends on how long you need to resolve anything Stage 1 raises. A major nonconformity at Stage 2 stops certification until the certification body has verified the fix; if that takes longer than six months from the last day of Stage 2, Stage 2 is repeated. Your gap analysis turns this into a dated plan for your sites.

How to get ISO 45001 certified, step by step

  1. Define the scope. Which sites, activities, workers and contractors are in. Scope and your risk category set the audit days for the whole three-year cycle.
  2. Run a gap analysis. Walk the sites. Compare your hazard controls, regulatory programs, worker participation and incident handling with what the standard expects, and turn the gaps into a plan with owners and dates.
  3. Pick a certification body and book Stage 1. Choose one accredited for ISO 45001, and check its accreditation in the accreditation body's own directory. Ask for the audit days, with contractors counted, and the day rate as separate numbers.
  4. Close regulatory gaps. Programs your regulator already requires come first. The certification body will look at legal compliance.
  5. Build the system around how work is done. Hazard identification and risk assessment with the people who do the work, controls, legal requirements, worker participation, emergency preparedness, incident investigation and competence.
  6. Run it and collect records. Inspections, training, consultation, incident investigations, corrective actions. This is the step nobody can shorten.
  7. Complete an internal audit and a management review. Both before Stage 1, so the certification body can see they are being performed. Fix what the internal audit finds.
  8. Stage 1 audit. The certification body reviews your documented system, readiness and legal requirements, and plans Stage 2. The interval depends on how long you need to resolve anything Stage 1 raises.
  9. Stage 2 audit. The certification body evaluates whether the system is implemented and effective, including shifts and contractors. Any major nonconformity must be closed and verified within six months of the last day of Stage 2, or Stage 2 is repeated.
  10. Certification decision, then surveillance. An independent reviewer at the certification body decides. Surveillance follows at least once each calendar year, and recertification comes before the certificate expires.

ISO 45001, OSHA SHARP and OSHA VPP

US buyers often meet three safety programs at once. They are different things, run by different evaluators, with different rewards. ISO's own technical committee describes ISO 45001 certification as voluntary and says legislation always takes precedence over standards. Your duties under the OSH Act or a State Plan stand on their own, and OSHA says the same of SHARP.

ISO 45001 certification OSHA SHARP OSHA VPP
What it is A voluntary international standard for an OH&S management system. OSHA recognition for small employers who have used its On-Site Consultation Program. OSHA recognition program with three levels: Star, Merit and Demonstration.
Who evaluates An accredited third-party certification body you choose and pay. Your state's On-Site Consultation office, funded by OSHA. An OSHA onsite evaluation team, after an application review by a VPP Manager.
Who can apply Any organization; third-party certification is voluntary. New participants: 250 or fewer employees on site and fewer than 500 company-wide. Private-sector general industry, maritime and construction employers, resident contractors and federal agencies; the employer that controls the worksite applies.
Injury rates Audit time can rise if your rates are above your sector's average. DART and TRC rates below the national average for your industry. Three-year TCIR and DART rates compared with BLS national averages for your industry.
What you get A certificate valid for three years, with yearly surveillance. Exemption from OSHA programmed inspections for up to two years at first, up to three on renewal. Exemption from OSHA programmed inspections while you keep VPP status; re-evaluated every three to five years.

Holding one does not give you another: each has its own evaluator and its own criteria. A customer that asks for ISO 45001 usually means an accredited certificate. And the OSHA exemptions have limits: complaints, fatalities and imminent-danger situations can still bring an inspection. The work overlaps: hazard control, worker participation and incident investigation built for one serve the others.

Which edition

The current edition is ISO 45001:2018, with Amendment 1:2024 on climate action. ISO is revising it, and its draft, ISO/DIS 45001, will replace the 2018 edition. Until the new edition is published, certificates are issued to the 2018 edition. A system built to the 2018 edition, with the draft in view, moves across as an update.

Start with a number you can trust

A gap analysis turns this page into your budget. It fixes your scope, counts your contractors, settles your risk category, estimates your audit days, and gives you a dated plan to Stage 2. We are headquartered in the Kansas City metro, working with companies across the US and Canada, on site and remotely.

Talk through your scope

Common questions

How much does ISO 45001 certification cost?

Two bills plus your own team's time. The certification body's fee is set mainly by audit days: under Global ACI-TECH-3-004 (formerly IAF MD 5), a single site with 26 to 45 people in scope, contractors included, starts at 7 days for Stage 1 and Stage 2 combined if its OH&S risk is high, 5.5 if medium and 4 if low, before adjustments. Each yearly surveillance audit is about a third of that and recertification about two thirds, at the certification body's day rate. Consulting is optional. A standalone gap analysis from us is typically in the low five figures.

How long does it take to get ISO 45001 certified?

As long as it takes to produce the evidence the certification body must see. Before Stage 2, the certification body checks that internal audits and management reviews are planned and being performed, and Stage 2 then tests whether the system is implemented and effective, including legal compliance, on more than one shift in the first cycle. That needs records from running the system. A gap analysis gives you a dated plan for your sites; the certificate follows Stage 2 once any findings are closed and the certification body has decided.

How do I get ISO 45001 certified?

Define your scope, run a gap analysis, close any regulatory gaps, build the system with your workers around your hazards and legal requirements, run it long enough to produce records, complete an internal audit and a management review, then pass a two-stage audit by an accredited certification body. Check the certification body's accreditation in the accreditation body's own directory.

What is the ISO 45001 certification process?

Accredited certification bodies work to ISO/IEC 17021-1. Stage 1 reviews your documented system and readiness and plans Stage 2; Stage 2 evaluates whether the system is implemented and effective. Findings are closed, an independent reviewer makes the decision, and the certificate runs for three years, with surveillance audits at least once each calendar year and a recertification audit before it expires.

Is ISO 45001 the same as OSHA VPP or SHARP?

No. ISO 45001 is a voluntary international standard, and an accredited certification body you choose certifies you against it. SHARP and VPP are OSHA recognition programs: SHARP is for small employers who have used OSHA's On-Site Consultation Program, and VPP sites are approved after an onsite evaluation by an OSHA team. Both OSHA programs have injury-rate criteria and exempt participants from OSHA programmed inspections. They are separate programs, and holding one does not give you another.

Is ISO 45001 certification worth it?

It is when customers, owner-clients or prequalification programs ask for it, or when you want one system that keeps hazard control, worker participation and corrective action running across sites. It does not replace your legal duties: ISO's own committee says legislation always takes precedence over standards. A gap analysis shows the size of the work against what is driving the request, before you commit to the full cost.

Related

Sources

Changelog

  • 2026-10-30 — Published. Audit days, OH&S risk categories and OH&S-specific audit rules from Global ACI-TECH-3-004 (formerly IAF MD 5:2023); certification process from ISO/IEC 17021-1:2015 section 9; SHARP and VPP from OSHA; the voluntary status of ISO 45001 from ISO/TC 283; edition status from ISO and the ANSI Webstore.