Guide · AS9100 certification
AS9100 certification: cost, timeline and steps.
AS9100 certification costs two bills plus your team's time. The certification body charges for audit time, which IAQG's 9104/1 standard sets from your head count and then adjusts with a risk rating built from data you send before the audit. Preparation (consulting, training, tools) is the second bill, if you buy it. How long it takes depends on your starting point: the system has to run, produce records and complete an internal audit and management review before the auditors arrive. Here is every cost, every step and the evidence each step needs.
Last verified October 30, 2026
- What sets the audit fee
- Audit time from IAQG 9104/1, adjusted by your risk rating, times the certification body's day rate.
- What sets the timeline
- Your starting point. A working ISO 9001 system is the shortest route.
- The edition you certify to
- AS9100D (AS9120B for distributors). IA9100 is not published yet.
- Where most projects start
- A gap analysis. Ours is typically in the low five figures.
Every cost, itemized
This is the full list for a company certifying to AS9100 for the first time. Some lines are optional. None of them stop when the certificate arrives: it runs on a three-year cycle, with audits every year.
| Cost | Who you pay | When | What sets the amount |
|---|---|---|---|
| The standard | SAE International or a standards seller | Before you start | AS9100D, or AS9120B for distributors, plus any standard your customers specify, such as AS9102 for first article reports. |
| Gap analysis | Consultant (optional) | First | Your scope, your customers' flow-down clauses, and whether you already run an ISO 9001 system. |
| Build and implementation support | Consultant (optional) | After the gap analysis | How much of the aerospace layer you already do in practice, and how much of the writing and record-keeping your own team carries. |
| Your team's time | Your payroll | Throughout, then every year | A project owner, process owners, top management for the management review, and the people who keep production, inspection and supplier records. |
| Training | Training provider or consultant | Before the internal audit | Awareness for everyone in scope; deeper training for internal auditors and the people who run first article inspection and supplier approval. |
| Internal audit | Your trained staff or an outside auditor | Before Stage 1, then every year | Whether you build the skill in house or buy it. It has to cover every process in scope. |
| Pre-audit data (OCAP) | Your team's time | Before each audit | Scope, sites, structure and performance data your certification body asks for so it can rate your risk and set audit time. |
| Stage 1 and Stage 2 audits | Certification body | After the internal audit and management review | Audit time from the IAQG 9104/1 table and its risk adjustments, times the certification body's day rate, plus travel and any scheme or listing fees the quote shows. |
| Surveillance audits | Certification body | At least once each calendar year | Set under the same IAQG rules. The first must fall within 12 months of the certification decision. |
| Recertification | Certification body | Year 3 | Recalculated from your scope and risk data at the time, before the certificate expires. |
| Special-process approvals | Whoever your customer names | When a purchase order calls for one | Heat treating, chemical processing, nondestructive testing and similar work may need customer approval or Nadcap accreditation. These are separate programs with their own fees. |
| The next revision (IA9100) | Certification body, plus your own update work | Once IAQG publishes it and sets transition rules | How far your system is from the new edition. No publication date or transition deadline has been set. |
How AS9100 audit time is set
AS9100 does not use the audit-day table that applies to ISO 9001. An accredited certification body audits aerospace quality systems under three documents at once: ISO/IEC 17021-1, the general rules for any certification body; IAQG 9104/1, the rules of the aerospace certification scheme; and IAQG 9101, which governs how the audit is run and reported. Audit time comes from 9104/1. Its current edition, AS9104/1A, was revised in January 2022 and is sold through SAE International, so the table itself is not on any public website. What the public record shows is how the calculation works:
| Factor | What it does | Ask your certification body |
|---|---|---|
| Baseline table | A table in IAQG 9104/1 sets baseline audit durations from the number of employees in the certified organization. | Which table row did you use, and what head count? |
| OCAP risk rating | Before the audit you submit data on your context, scope and quality risks. The certification body rates you High, Medium or Low, and the rating adjusts audit time. | What rating did you give us, and how many days did it add or remove? |
| Sites and structure | 9104/1 sets site-structure rules for single-site and multi-site organizations, and the audit plan follows them. | How did you count each site and any central function? |
| Remote audit time | Under set conditions, up to 50% of audit duration may be done remotely. | How much of the plan is remote, and does that change travel cost? |
| Performance-based surveillance (PBS/RP) | Organizations that qualify can audit a smaller share of the system each time: NASA OSMA describes 33% of quality system elements instead of the 50% baseline, with every element covered within 48 months. Criteria include a Low or Medium risk rating and no suspension of AS9100 certification in the prior six years. | When could we apply, and what would we have to show? |
The step most buyers miss is the Organization Certification Analysis Process (OCAP). NASA's Office of Safety and Mission Assurance described the data as due 90 days before the start of the audit. The certification body uses it to plan the audit and rate your risk, and the rating moves your audit time up or down. Clean, current data is a lever on the audit fee you control.
To turn audit time into dollars, multiply the days by the day rate, then add travel and listed fees. Ask for each number separately. Do not estimate AS9100 from an ISO 9001 audit-day table: the two schemes use different rules. Our ISO certification cost guide covers the ISO 9001 method if you hold both certificates.
Who can certify you
Only a certification body inside the IAQG scheme can issue an AS9100 certificate that aerospace customers recognize. Three checks apply:
- The certification body must be accredited with 9100 in its scope. 9120 (distributors) and 9110 (maintenance) are separate scope options, so confirm the one you need. In the US, ANAB requires a certification body to hold ISO 9001 accreditation for at least a year before it applies for AS accreditation. In Canada, the Standards Council of Canada sets the same one-year rule.
- The accreditation body must be approved by IAQG to work in the scheme. Our Global ACI guide explains how accreditation recognition now works, including for aerospace certificates.
- The auditors must be authenticated for aerospace audits under IAQG 9104/3, as Aerospace Auditors or Aerospace Experienced Auditors.
All three show up in OASIS, IAQG's Online Aerospace Supplier Information System. It lists suppliers certified under the IAQG rules, along with certification bodies, accreditation bodies and authenticated auditors. It is also where your own certificate and audit results will appear. Our guide to verifying a certificate shows where to check each kind.
Your team's time: the line no quote prices
AS9100 asks more of your people than ISO 9001 does, because the aerospace layer adds controls that touch the shop floor every day. Budget hours for:
- A project owner and process owners who write down how work is done and close what the gap analysis finds.
- Operations and engineering for operational risk, configuration management, product safety, foreign object debris (FOD) prevention and production process verification, usually through first article inspection.
- Purchasing and receiving for supplier approval and monitoring, flow-down to your own suppliers, and counterfeit part prevention.
- Top management, internal auditors and whoever prepares the OCAP data before each audit.
The less of this your team can carry, the more outside help you buy. Our AS9100 vs ISO 9001 comparison sets out what the aerospace layer adds to an ISO 9001 system.
The timeline: what has to exist before each audit
Any AS9100 timeline is set by evidence, not by the calendar. These are the gates a certification body applies, in order:
- Before Stage 1: a running system. Documented processes, records that show they are followed, a completed internal audit and a management review. At Stage 1 the certification body checks that internal audits and management reviews are planned and performed. A plan alone gives it nothing to check.
- Before each audit: OCAP data. Your context, scope, sites and quality risks, sent ahead so the audit can be planned and timed.
- Stage 1: readiness. The auditor reviews your documented system, confirms the scope and decides whether you are ready for Stage 2. If not, the certification body can change the Stage 2 plans or repeat part of Stage 1.
- Stage 2: implementation and effectiveness. The 9101 audit standard has the auditors report on whether each process is effective, not only whether it conforms. Expect them to follow records end to end: a purchase order's flow-down to your supplier, a first article report, a nonconforming part.
- After Stage 2: findings closed. If the certification body cannot verify corrections and corrective actions for a major nonconformity within 6 months of the last day of Stage 2, it must run another Stage 2.
- Certification decision and OASIS. The three-year cycle starts on the decision date. Your certificate and audit results then show in OASIS, where aerospace customers look.
- Every year after. Surveillance at least once each calendar year, the first within 12 months of the decision, and recertification in year 3.
What makes it longer: no ISO 9001 system, design responsibility, several sites, special processes and heavy customer flow-down. What makes it shorter: an ISO 9001 system that already runs under control, in a shop that already does much of the aerospace work and only needs to prove it.
AS9100 certification, step by step
- Read your purchase orders. The quality clauses decide whether you need AS9100, AS9120 or ISO 9001. Distributors should certify to AS9120, not AS9100.
- Buy the standard. AS9100D, revised September 20, 2016, contains the ISO 9001:2015 requirements plus the aviation, space and defense layer. Customer and legal requirements take precedence where they conflict with it.
- Run a gap analysis. Against AS9100D and your customers' flow-down, with a prioritized plan and a dated route to Stage 2.
- Build the aerospace layer into the way your shop already works, including control of outsourced special processes.
- Train people and run the system. Records come only from time and from people doing the work.
- Complete the internal audit and management review, and close what they find.
- Choose your certification body. Confirm its 9100 (or 9120) scope and its accreditation, and get a three-year quote.
- Submit the OCAP data on the certification body's schedule.
- Stage 1, then Stage 2. Answer findings with corrective action that addresses the cause.
- Certification and OASIS listing. Tell your customers, and plan the first surveillance audit.
IA9100 and your budget
AS9100's next revision will be published as IA9100. As of October 30, 2026, IAQG's published standards page lists no IA9100, and no transition deadline has been set. Certification bodies audit to AS9100D, and that is what your customers call for. Budget for a transition inside a future certificate cycle, and ask your certification body how it will handle the move once the rules exist. Our IA9100 status tracker keeps the record current.
Start with a number you can trust
A gap analysis turns this page into your budget. It reads your customers' flow-down, confirms the right standard, lists what has to be built and gives you a plan with dates. A standalone gap analysis from us is typically in the low five figures, and every engagement after it is priced to its scope. We are headquartered in the Kansas City metro, working with companies across the US and Canada, on site and remotely. Choosing outside help? Our guide to choosing an AS9100 consultant lists the aerospace-specific questions to ask.
Free tools and downloads
- ISO 9001:2026 gap analysis checklist88 clause-by-clause checks with the 2026 changes marked; free Excel and PDF workbook.
- AS9100 internal audit toolkit102 AS9100D checks with the 51 aerospace additions marked, plus a process audit sheet.
- What 32 major manufacturers require of suppliersWhich customers require a certificate, which only expect one, and which ask for a system.
Common questions
How much does AS9100 certification cost?
It is two bills plus your own time. The certification body's fee is its audit time multiplied by its day rate. AS9100 audit time is set by IAQG's 9104/1 standard: a baseline table based on the number of employees, then adjusted by a risk rating from the data you submit before the audit. Preparation is the second bill, if you buy it: consulting, training and tools. A standalone gap analysis is typically in the low five figures. Ask every certification body for the days, the rate, and the travel and fees as separate numbers.
How long does it take to get AS9100 certified?
It depends on your starting point, and nobody can promise a date. A company that already runs an ISO 9001 system has most of the structure. A company starting from nothing has more to build. Either way, the system has to run long enough to produce records, and the internal audit and management review must be underway before Stage 1. If Stage 2 finds a major nonconformity, its correction has to be verified within 6 months or Stage 2 is repeated. A gap analysis gives you a dated plan for your own scope.
How do you get AS9100 certified?
Confirm from your purchase orders that AS9100 (or AS9120, for distributors) is the right target. Buy the standard, run a gap analysis, and build the aerospace controls into the way your shop works. Train people, run the system and keep records. Complete an internal audit and a management review. Choose a certification body accredited for the 9100 series, submit its pre-audit data, then pass Stage 1 and Stage 2. Once certified, your certificate and audit results appear in OASIS.
What is the AS9100 certification process?
An accredited certification body audits under ISO/IEC 17021-1, IAQG 9104/1 and the IAQG 9101 audit standard. Stage 1 reviews your documented system and readiness, and checks that internal audits and management reviews are planned and performed. Stage 2 evaluates whether the system is implemented and effective, process by process. Certification starts a three-year cycle with surveillance audits at least once each calendar year and recertification in year 3. The auditors must be authenticated for aerospace audits under IAQG 9104/3.
Is AS9100 certification worth it?
If your customers require it, it is the price of the work. According to ANAB, most major aviation, space and defense organizations require their direct suppliers to be certified to one or more standards in the AS9100 series, and aerospace buyers check supplier certification in OASIS. If your purchase orders ask only for ISO 9001, AS9100 is a choice: it can open doors with the customers you want next. Read your flow-down clauses before you decide.
How much do AS9100 surveillance audits cost?
Budget for one every calendar year, at the certification body's day rate, with the first due within 12 months of the certification decision. Their length is set under the same IAQG 9104/1 rules as the initial audit, including the risk rating from your pre-audit data. Organizations that qualify for performance-based surveillance can audit a smaller share of the system at each audit, with every element still covered within 48 months. Ask your certification body to quote surveillance and recertification with the initial audit, so you see the three-year total.
Related
- AS9100 consulting — AS9100D, ISO 9001 upgrades and AS9120.
- How to choose an AS9100 consultant — the aerospace-specific tests.
- IA9100 status tracker — the next revision of AS9100.
- AS9100 vs ISO 9001 — what the aerospace layer adds.
- ISO audit days calculator — ISO 9001 audit time, the starting point the aerospace rules build on.
Sources
- IAQG, Certification Scheme — certification body, accreditation body and auditor requirements; 9104/1, 9101 and 9104/3; OASIS.
- IAQG, Published Standards — the 9100 family and the scheme documents; no IA9100 listed on October 30, 2026.
- IAQG, OASIS — suppliers certified under the IAQG rules.
- NASA Office of Safety and Mission Assurance, November 10, 2021 — baseline audit durations from a 9104/1 table based on employees; OCAP data 90 days before the audit; risk rating; PBS/RP criteria.
- ANAB, "AS9104 and New Revisions" — OCAP calculates audit time; audit duration can be decreased by 33% for single and multi-site structures; up to 50% remote.
- ANAB, AS9100 quality management system certification — who requires AS9100; accreditation prerequisites; AS9120 for distributors.
- Standards Council of Canada, aerospace quality management systems — accreditation prerequisites in Canada.
- ISO/IEC 17021-1:2015, section 9 (IAS) — clauses 9.1.3.2, 9.1.3.3, 9.3.1.2.2, 9.3.1.2.4, 9.3.1.3 and 9.5.3.2.
- SAE International: AS9100D, AS9120B, AS9101G and AS9104/1 — editions and scope.
Changelog
- 2026-10-30 — Published. Audit time from IAQG 9104/1 as described by NASA OSMA (November 2021) and ANAB; scheme rules from IAQG, ANAB and the Standards Council of Canada; certification process from ISO/IEC 17021-1:2015 section 9; standard editions from SAE International; IA9100 status from IAQG's published standards page.