Skip to content

Guide · ISO 13485 certification

What ISO 13485 certification costs, and what it takes.

ISO 13485 certification costs two bills plus your team's time: the certification body's audits, priced by audit days from a medical device table that runs higher than ISO 9001's at every company size, and any preparation you buy. How long it takes depends on how quickly your design, risk and supplier records can show the system working. Here is every cost over the three-year cycle, the audit-day table, what FDA and Health Canada require, and the steps from scope to certificate.

Last verified October 30, 2026

What sets the audit fee
People in scope, through the ISO 13485 audit-time table, plus device complexity and regulatory requirements.
Compared with ISO 9001
More audit days at every size. 6 days instead of 4 for 26 to 45 people.
FDA
Does not certify. The QMSR incorporates ISO 13485, but certificates come from certification bodies.
Where most projects start
A gap analysis. Ours is typically in the low five figures.

Every cost, itemized

This is the full list for a device company certifying for the first time. Some lines are optional. None of them stop after the certificate arrives: it runs for three years, with audits every year.

Cost Who you pay When What sets the amount
The standard itself A standards seller Before you start ISO 13485:2016 is still the current edition, confirmed by ISO in 2025. ISO lists it at CHF 196.
Gap analysis Consultant (optional) First Device classes and markets, product families, sites, and how much design and risk work is already on file.
System build and implementation support Consultant (optional) After the gap analysis Design controls, risk management, supplier controls, validation, complaint handling and CAPA: how much exists, and how much your team carries.
Your team's time Your payroll Throughout, then every year Engineers on design and risk files, operations on validation and supplier records, top management on the management review.
Training Training provider or consultant Before Stage 2 Awareness for everyone in scope; deeper training for internal auditors and the owners of design, risk and complaint processes.
Internal audit Your trained staff or an outside auditor Before Stage 2, then at planned intervals Whether you build the skill in house or buy it. FDA can now inspect quality audit reports.
Stage 1 and Stage 2 audits Certification body (or MDSAP auditing organization) When records exist Audit days from Table D.1 (explained below), adjusted, times the day rate, plus travel and any fees in the quote.
Regulatory requirements in the audit Certification body or MDSAP auditing organization With each audit Time to audit national or regional requirements is added on top of the ISO 13485 time, not taken out of it.
Surveillance audits, years 1 and 2 after certification Certification body At least once each calendar year About one third of initial audit time. The first must fall within 12 months of the certification decision.
Recertification, year 3 Certification body Before the certificate expires About two thirds of what an initial audit would take on your scope at that time.

Certification body audit days for ISO 13485

ISO 13485 does not use the ISO 9001 audit-day figures. Accredited certification bodies start from Table D.1 of IAF MD 9, the mandatory document for ISO 13485 certification, now republished as Global ACI-TECH-3-007 with no substantive change to the text. The table gives the days for the initial audit, Stage 1 and Stage 2 combined, against the effective number of people within the scope of the certificate: permanent, temporary and part-time people, on every shift. The general audit-time rules still apply, so surveillance runs about a third of the initial time each year and recertification about two thirds.

The difference from ISO 9001 is large. A 30-person device manufacturer starts at 6 days for Stage 1 and Stage 2 together, against 4 for the same company under ISO 9001, then about 2 days for each surveillance audit and about 4 at recertification. At 100 people the starting figure is 10 days against 7.

Surveillance and recertification figures are rounded to the nearest half day, as the audit-time rules direct. Neither is likely to be shorter than one audit day. Recertification is recalculated from your scope at the time, not from the original audit.

What adds time

  • More than one main technical area in scope, such as sterile and non-sterile devices.
  • Device complexity.
  • Reliance on suppliers for critical processes or parts. Time can be added for each supplier the auditor has to visit when you cannot show control.
  • Installing product at customers' premises.
  • A poor record of regulatory compliance.
  • Multiple shifts or production lines.

What can reduce it

  • No manufacturing in scope, for example wholesale, retail, transport or equipment maintenance.
  • A smaller product range, or fewer design or production processes, than at the last audit.

Reductions together are capped at 20%, tighter than the 30% cap for ISO 9001. Distribution or transport services can be reduced by up to 50%.

Three rules catch budgets out. Time to audit national or regional regulatory requirements is added to the ISO 13485 time, and design dossier reviews are not part of it at all. Sites that design, develop or manufacture devices cannot be sampled, so each one is audited. If ISO 9001 and ISO 13485 are audited together, the combined audit takes at least 25% more than the ISO 13485 time alone.

Our free ISO 13485 audit days calculator works out your own starting figure, surveillance and recertification days in the browser. To turn days into dollars, multiply by the day rate in the quote and add the travel and fees it lists. Ask for the days and the rate separately so you can check the arithmetic. Our certification cost guide explains how day rates and quotes work.

FDA, MDSAP and Canada: what you are actually buying

United States

FDA's Quality Management System Regulation took effect on February 2, 2026 and incorporates ISO 13485:2016 by reference. FDA does not require or issue ISO 13485 certificates, and a certificate does not exempt you from inspection. Under the QMSR, FDA can inspect management review, quality audit and supplier audit reports, so those documents now carry regulatory weight as well as certification weight.

MDSAP and Canada

The Medical Device Single Audit Program lets one audit by a recognized auditing organization serve Australia, Brazil, Canada, Japan and the US. FDA may accept MDSAP audit reports in place of routine inspections. Health Canada has accepted only MDSAP certificates since January 1, 2019, and Class II, III and IV devices need one; for Class III and IV, the scope must include design.

MDSAP sets audit time by its own procedure rather than Table D.1. It counts the audit tasks that apply in each process, converts them to days, and adds 25% for an initial audit. A reduction for a small company is available in full only to organizations that meet all three of its criteria: lower-risk devices, simple designs and processes, and a good compliance history; otherwise any smaller reduction needs a documented justification. Ask any MDSAP auditing organization to show you that calculation.

Your team's time: the line no quote prices

The certification body audits what your people built. Across the project, and every year after, budget for:

  • A project owner with authority to make decisions and time every week.
  • Engineers who keep design and development files and the risk management file current as the design moves.
  • Operations and supply chain for process validation, supplier evaluation and purchasing controls.
  • Quality and regulatory for complaint handling, adverse event reporting, advisory notices, recalls and CAPA, all of which surveillance audits review.
  • Top management, who take part in the management review.
  • Internal auditors trained to audit processes other than their own.

The timeline: what has to exist before Stage 2

No rule sets a calendar for ISO 13485. The rules set evidence. Before Stage 2, the certification body has to see that internal audits and management reviews are being planned and performed. Stage 2 then tests whether the whole system is implemented and effective. In practice, auditors look for:

  • A completed internal audit covering the full scope, with findings and the actions taken.
  • A management review with real inputs and decisions, held by top management.
  • Design and development records for the devices in scope, connected to the risk management file.
  • Supplier evaluations and purchasing controls for critical suppliers.
  • Process validation records, including sterilization validation where it applies.
  • Complaint, CAPA and reporting records, or the working procedures if none have arisen yet.
  • Training and competence records for the people doing the work.

Those records only come from running the system, which is why the start date of real operation, not the date documents are finished, sets the earliest Stage 2. Book the audit early: the certification body's calendar is the one part of the plan you do not control.

Step by step, from scope to certificate

  1. Fix the scope and the markets. List the device families, their class in each market, and the sites that design, make, sterilize or service them. US only, Canada, or the other MDSAP markets changes which audit you buy.
  2. Run a gap analysis. Compare what exists today with ISO 13485:2016 and the QMSR. The output is a list of what to build, an estimate of your audit days, and a plan.
  3. Build the system around how you work. Design and development files, a risk management file connected to them, supplier controls, process validation, complaint handling, adverse event reporting, CAPA and document control.
  4. Run it and keep the records. Auditors judge the system on records: design reviews, supplier evaluations, validation reports, complaint files, training records. Only time produces them.
  5. Audit yourself and hold the management review. Both have to be planned and performed before Stage 2. Write them knowing FDA can now ask to see management review and quality audit reports.
  6. Choose the auditor and book early. An accredited certification body for ISO 13485, or an MDSAP auditing organization if Canada or another MDSAP market is in the plan. Check the accreditation in the accreditation body's directory.
  7. Stage 1. The auditor reviews your documented system, confirms the scope and checks that you are ready. For higher-risk devices, Stage 1 should be on site.
  8. Stage 2. The auditor tests whether the system is implemented and effective across the whole scope, including every design, development and manufacturing site.
  9. Close the findings. A major nonconformity has to be corrected and verified within six months of the last day of Stage 2, or Stage 2 is repeated.
  10. Certification decision, then the cycle. Surveillance every calendar year, the first within 12 months of the decision, then recertification in year 3.

Start with a number you can trust

A gap analysis turns this page into your budget. It fixes your scope and markets, estimates your audit days, lists what has to be built, and gives you a plan to a Stage 2 date. A standalone gap analysis from us is typically in the low five figures, and every engagement after it is priced to its scope. We are headquartered in the Kansas City metro, working with companies across the US and Canada, on site and remotely. If you are comparing outside help, our guide to choosing an ISO 13485 consultant sets out the tests.

Talk through your scope

Common questions

How much does ISO 13485 certification cost?

Two bills plus your own time. The certification body's fee is set mainly by audit days. Under the ISO 13485 audit-time table, a single site with 26 to 45 people in scope starts at 6 days for Stage 1 and Stage 2 combined, before adjustments; the ISO 9001 table gives the same company 4. Each yearly surveillance audit is about a third of the initial time and recertification about two thirds, all at the body's day rate, with any regulatory requirements added on top. Consulting is optional and depends on how much of your design, risk and supplier work already exists. A standalone gap analysis from us is typically in the low five figures.

How long does it take to get ISO 13485 certified?

As long as it takes to produce the records the auditors test. Before Stage 2, the certification body has to see internal audits and management reviews planned and performed, and Stage 2 then checks that design controls, risk management, supplier controls, complaint handling and CAPA are working across the whole scope. A company with design history and supplier records already on file reaches Stage 2 sooner than one building them from nothing. A gap analysis turns that into a dated plan for your scope.

How do you get ISO 13485 certified?

Define the scope and your markets, run a gap analysis, build and run the quality system, hold an internal audit and a management review, then contract an accredited certification body (or an MDSAP auditing organization) for a two-stage audit. Once any major findings are closed, the certification body makes an independent decision and issues the certificate. Surveillance follows every year and recertification in year 3.

What is the ISO 13485 certification process?

The same two-stage structure as other management system certifications, with medical device rules on top. Stage 1 reviews your documented system and readiness, and for higher-risk devices it should be on site. Stage 2 tests implementation across the full scope; sites that design, develop or manufacture devices cannot be sampled. Majors must be verified closed within six months of Stage 2. Surveillance audits also review how you handled adverse event notifications, advisory notices and recalls.

Does the FDA require ISO 13485 certification?

No. Since February 2, 2026, FDA's Quality Management System Regulation incorporates ISO 13485:2016 by reference, but FDA does not require or issue ISO 13485 certificates, and a certificate does not exempt a manufacturer from inspection. Certification is what customers, contract manufacturing partners and other markets ask for. For Canada, Health Canada has accepted only MDSAP certificates since January 1, 2019, and a new license application must include a certificate from a Health Canada-recognized auditing organization.

Is ISO 13485 certification worth it?

If you sell outside the US, supply a device manufacturer, or plan to, it is usually a condition of doing business rather than a choice. If you sell only in the US, the QMSR already requires a system built on ISO 13485, so the extra cost is the certification audits themselves, and the return is a certificate that customers and partners can check. Price it across the full three-year cycle, not just the first audit.

Related

Sources

Changelog

  • 2026-10-30 — Published. Audit days from IAF MD 9:2023 Annex D (now Global ACI-TECH-3-007, no substantive change), surveillance and recertification ratios from Global ACI-TECH-3-004, the certification cycle from ISO/IEC 17021-1, FDA's QMSR FAQ and MDSAP page, MDSAP's audit time procedure, and Health Canada's MDSAP and licensing guidance.