Skip to content

ISO 45001 · Nashville, TN

ISO 45001 consulting for the Smyrna and Spring Hill supply base.

Two vehicle assembly plants sit inside the Nashville metro, and both automakers publish what they expect of suppliers on safety. Neither names a certificate. ISO 45001 answers both from one system.

We work with Nashville companies on site and remotely, from the first gap analysis to the day the certificate arrives.

Two supplier codes, and neither names a certificate

Our Nashville hub page follows the hospital industry and an accreditation route that ends in ISO 9001. This page follows a different buyer: vehicle assembly. Nissan assembles vehicles at its Smyrna plant, in Rutherford County. GM lists the Cadillac XT5, XT6, LYRIQ and VISTIQ at Spring Hill Manufacturing, in a city that spans Maury and Williamson counties. All three counties sit inside the 14-county Nashville metropolitan area as the federal government delineated it in 2023.

On safety, both automakers answer in writing. GM's Supplier Code of Conduct says suppliers will provide ongoing occupational health and safety training, including before work begins; run emergency drills at least annually; evaluate production machinery for safety hazards; manage the health and safety of contractors on their premises; and, if asked, complete questionnaires or take part in on-site assessments or audits. Nissan's Supplier Sustainability Guidelines (January 2026) require suppliers to comply with the health and safety laws where they operate, to set clear and measurable company-wide health and safety goals, with zero fatal accidents as the example, and to train on specific measures.

Neither document names ISO 45001, or any other certificate. What they describe is the parts list of a safety management system. In ISO 45001:2018 those parts are objectives (clause 6.2), competence (7.2), operational planning and control (8.1), emergency preparedness and response (8.2), and incident investigation with corrective action (10.2). A supplier that answers each line from a different binder can fill in a questionnaire. A supplier that answers from one system can stand up to the on-site assessment GM's code reserves.

Both codes defer to local law, and here local law is Tennessee's. The state Department of Labor says its Hazardous Chemical Right to Know rule, 0800-01-09, provides additional requirements that substantially add to federal hazard communication, and Tennessee replaces the federal air contaminant table with a rule of its own. So the legal requirements register under clause 6.1 for a plant in Rutherford, Maury or Williamson County names rule 0800-01-09 and the state air contaminant rule, beside the training, drill and goal lines the two supplier codes add. The boundary runs the other way too. OSHA lists employment at Tennessee Valley Authority facilities among the State Plan's exclusions, so employment at TVA's Gallatin Fossil Plant, in Sumner County inside the same metro, falls to federal OSHA.

The manufacturing base here

The Nashville metro has 1,552 manufacturing establishments, and 89% of them employ fewer than 100 people (1,378 of them, per US Census County Business Patterns, 2023). That puts it 34th by small-manufacturer base among the 194 US markets we cover.

The headquarters city of the American hospital industry — and one of the CMS-deemed accreditation routes builds ISO 9001 compliance into the program, with certification available as a further step.

Which safety regulator applies

Tennessee operates an OSHA-approved State Plan covering most private-sector workers as well as state and local government workers.

What an engagement covers

  • Supplier-code crosswalk Each safety line in GM's Supplier Code of Conduct and Nissan's January 2026 Supplier Sustainability Guidelines, matched to the ISO 45001 clause and the record that answers it. See ISO 45001.
  • Tennessee legal register TOSHA's rules, including the state Right to Know rule and the state air contaminant rule, with the State Plan's exclusions, such as employment at Tennessee Valley Authority facilities, marked separately.
  • Measurable company-wide goals The health and safety goals Nissan's guidelines ask for, set under clause 6.2 with owners, targets and dates, and reviewed by management on a fixed cycle.
  • Training before the first shift Competence records under clause 7.2 that show training happened before work began, the point GM's code makes in so many words.
  • Drills, incidents and contractors Annual emergency drill records under clause 8.2, incident investigations closed through clause 10.2, and controls for contractors working on your premises.
  • Audit before the customer's Auditor-grade internal audits that test the system against both supplier codes and the standard before a customer questionnaire or on-site assessment does.

Questions we get from Nashville companies

Do Nissan or GM require ISO 45001 from suppliers in the Nashville area?

Their published supplier documents do not name it. GM's Supplier Code of Conduct sets out safety expectations, from training before work begins to annual emergency drills and machinery hazard reviews, and says suppliers will complete questionnaires or take part in on-site assessments or audits if requested. Nissan's January 2026 Supplier Sustainability Guidelines require measurable company-wide health and safety goals and say Nissan may ask a supplier to take a third-party sustainability compliance assessment. Your purchase order and supplier agreement decide what your contract requires. ISO 45001 puts the evidence for all of it in one system.

Which safety rules apply to a plant in Rutherford, Maury or Williamson County?

Tennessee's. TOSHA, part of the Tennessee Department of Labor and Workforce Development, adopts the federal general industry standards with listed exceptions. It uses its own air contaminant rule in place of 29 CFR 1910.1000 and adds a Hazardous Chemical Right to Know rule that goes beyond federal hazard communication. Federal OSHA keeps employment at Tennessee Valley Authority facilities and on military bases, among other exclusions.

Will ISO 45001 certification exempt us from TOSHA inspections?

No. Inspection relief in Tennessee comes from TOSHA's own recognition programs. Volunteer STAR, patterned after OSHA's Voluntary Protection Program, exempts participants from programmed inspections for three years. New SHARP sites are exempt for 12 months and can then be recertified for three years. Volunteer STAR requires injury and illness rates below the national average for your industry and the critical safety and health management system components in place, and its program page does not name ISO 45001. An ISO 45001 system is one way to build those components. The rates have to be earned on the floor.

Should a Nashville supplier wait for the next edition of ISO 45001?

No. ISO says ISO 45001:2018 was reviewed and confirmed in 2024 and remains current, with a 2024 amendment on climate action, and it plans the revision for publication as ISO 45001:2027. The supplier codes above apply now, and a system built to the current text is what a certification body audits today.

More in Nashville

Our Nashville page leads with ISO 9001 and carries the local research this page builds on.

Nationwide: ISO 45001 consulting services.

Also in Nashville: ISO 14001, ISO 27001.

ISO 45001 elsewhere: Rockford, Wichita.

Nearby metros: Chattanooga, TN; Memphis, TN; Knoxville, TN; Evansville, IN; Clarksville, TN; Jackson, TN.