Jackson, Tennessee
ISO consultants for Jackson die casters and metal formers.
EPA's foundry air rule defines die casting out. Its casting wastewater rule writes it in, with limits per pound of metal poured. An ISO 14001 system built from the definitions gets both right.
ISO certification consulting in Jackson at a glance
- Who we are
- Glocal Insight: senior ISO management system consultants working with Jackson companies on site and remotely. The consultant who scopes the work does the work.
- Standards
- ISO 9001, AS9100, ISO 14001, ISO 45001, ISO 27001, ISO 42001, ISO 13485, ISO 17025, plus internal audits, auditor training and ISO certification maintenance.
- Typical timeline
- For ISO 9001 at a company of 10 to 100 people, about three to four months from kickoff to the Stage 2 audit. Week by week.
- Cost
- A standalone gap analysis is typically in the low five figures; full implementation depends on scope. Certification body fees are separate. How certification costs are set, or estimate your audit days.
- Track record
- 100% certification success. 100% of surveyed clients would recommend us.
- Contact
- (816) 535-0738 or start a conversation.
Two EPA rules, one die casting floor
The Jackson metropolitan area is four West Tennessee counties: Madison, Chester, Crockett and Gibson. It has 176 manufacturing establishments, 141 of them with fewer than 100 employees — 80% of the base — employing about 14,353 people (US Census County Business Patterns, 2023). Manufacturing holds more than one private-sector job in five, at 2.1 times the national concentration (BLS QCEW, 2024 annual averages).
Jackson forces molten metal into dies under pressure, at scale. Toyota Motor Manufacturing Tennessee, in Jackson, makes aluminum engine blocks and automatic transmission cases and housings by high-pressure casting: nearly 2 million blocks and more than a million cases and housings a year, by Toyota's own figures. In September 2026 ArtiCast Jackson announced a $10.3 million high-pressure die casting operation in Madison County, with machines of up to 1,800 tons.
Federal environmental law treats that process in two opposite ways. EPA's air toxics rule for nonferrous foundries that are area sources, 40 CFR 63 subpart ZZZZZZ, defines die casting out of its foundry definitions. EPA's wastewater rule for metal molding and casting, 40 CFR part 464, writes it in, with pretreatment standards of its own for die casting operations that discharge to a city sewer.
A compliance register built from the word “foundry” gets both rules wrong. One built from the definitions gets both right. That is the job an ISO 14001 compliance obligations process is for, and in a die casting town it is where the system earns its keep.
Industry in Jackson
- Toyota Motor Manufacturing Tennessee, Jackson Aluminum engine blocks and automatic transmission cases and housings by high-pressure casting; 450 employees; $71.4 million for hybrid lines announced in 2025, starting production in 2027 and 2028
- ArtiCast Jackson High-pressure die casting with machines up to 1,800 tons in the former Pace Industries facility; $10.3 million and 100 jobs announced September 15, 2026
- Toyota Boshoku Tennessee Metal stamping for seat frame components in Jackson; a $54.4 million expansion announced in March 2023 was expected to bring employment to more than 900
- MAT Industries, Jackson Air compressors and air brake tanks at 213 Industrial Drive; 85 more jobs announced October 29, 2026, after a 30-job expansion in June 2025
- The manufacturing base 141 of 176 establishments under 100 employees (Census CBP, 2023); manufacturing at 2.1 times the national concentration and 22% of private employment (BLS QCEW, 2024 annual averages)
What the casting wastewater rule asks of a die caster
Part 464's aluminum casting subpart covers operations that pour or force molten metal into a mold, and it lists die casting among its process segments. For die casting operations that discharge to a publicly owned treatment works, the existing-source pretreatment standard, 40 CFR 464.15(c), sets daily maximum and monthly average limits for copper, lead, zinc, total phenols and total toxic organics.
Two features change how the system has to run. The limits are written as pounds of pollutant per million pounds of metal poured, so poured-metal records belong in the environmental file, not only the production file. And a plant discharging to a sewer may monitor oil and grease instead of total toxic organics; under 40 CFR 464.03(a), meeting the oil and grease standard counts as meeting the toxic organics standard.
Then the general pretreatment reporting rules in 40 CFR 403.12 apply, with periodic compliance reports to the control authority on the schedule it sets. If its own sampling shows a violation, the rule requires prompt notice to the control authority and repeat sampling. It also calls for advance notice of a substantial change in the discharge and for keeping monitoring records.
Each of those is a dated, recurring obligation with an owner, which is exactly what ISO 14001's compliance obligations and monitoring requirements are built to carry. A new die casting cell, a new die lubricant or a new trim line is a change in the character of the discharge until someone has checked that it is not.
What the foundry air rule leaves out
Subpart ZZZZZZ applies to aluminum, copper and other nonferrous foundries that are area sources, have an annual metal melt production (or, for new sources, capacity) of at least 600 tons and use material containing the listed metals. Its definition of an aluminum foundry excludes die casting, which the rule defines separately as forcing molten metal under high pressure into molds or dies.
That exclusion settles one rule, not a plant's air obligations. Melting and holding furnaces and the rest of the operation still have to be checked against Tennessee's air permitting rules and any permit the facility holds. The point for the environmental system is method: applicability is decided from the rule's definitions, recorded with the reason, and rechecked when the process changes.
The recheck matters. A line that pours metal into molds, rather than forcing it into dies, is the kind of change that can bring the foundry rule into scope if the other applicability tests are met. The decision belongs in your management of change, not in a permit renewal two years later.
The supply base around the casters
The casters sit inside a broader metal-forming base. In March 2023 the state announced a $54.4 million expansion of Toyota Boshoku Tennessee's Jackson metal stamping operation, for seat frame components, expected to bring employment to more than 900. MAT Industries, which makes air compressors and air brake tanks at its Jackson plant, announced 85 more jobs in October 2026, after a 30-job expansion in June 2025.
Toyota is adding here too. In 2025 it announced $71.4 million and 33 jobs at the Jackson plant for hybrid transaxle cases, housings and engine blocks, with the new lines starting production in 2027 and 2028.
For these suppliers the quality requirement arrives through each customer's purchase documents. Automotive customers may flow down IATF 16949, which is specialist work outside our scope. ISO 9001 remains the base for everything else: ArtiCast lists aerospace, drone, defense, robotics, commercial truck, industrial and agricultural markets alongside automotive.
Tennessee's safety program in a casting plant
Tennessee runs an OSHA-approved State Plan, TOSHA, that covers private-sector workplaces, with listed exceptions that include employment at Tennessee Valley Authority facilities and on military bases. A Jackson plant's legal register for safety starts from Tennessee's rules, not only the federal ones.
A die casting cell puts molten aluminum, high-tonnage machines, trim presses and die changes in one place. An ISO 45001 system built alongside ISO 14001 shares its structure, its legal register method and its management of change, so the same review that asks whether a new cell changes the discharge also asks whether it changes the hazards.
How we work with companies here
We work with Jackson companies on site and remotely, and we put the on-site days where being in the building changes the outcome: the walkthrough of the casting floor and the wastewater path, the first internal audit cycle and the certification audits.
The most useful first meeting here is a reading exercise: your sewer discharge permit, your last two compliance reports, your air permit and a month of poured-metal records. That shows which rules actually apply to you and where the records already exist, before anyone prices a system.
The consultant who scopes the engagement does the work. No handoff to a junior implementer after the sale.
100% certification success. Every client we have taken to a Stage 2 certification audit has been certified, with no major nonconformities. 100% of surveyed clients would recommend us. Every client who answered our client satisfaction survey said they would recommend Glocal Insight.
ISO standards we help Jackson companies with
This page focuses on ISO 14001, and we can help Jackson companies with any of the standards below. If you are deciding whether to bring in outside help, start with what an ISO consultant does, how fees work and when certification is worth it.
ISO 14001 in Jackson
The Jackson, Tennessee metro has 41 establishments in chemical, plastics and rubber, paper, primary metal, and metal coating and finishing manufacturing (BLS QCEW, 2024 annual averages), the industries where air, water and waste obligations tend to be heaviest. ISO 14001 gives a site one system for its permits, its environmental aspects and its customers' sustainability questionnaires.
The focus of this page. ISO 14001 consultants → · Free ISO 14001:2026 gap analysis checklist · Free ISO 14001 internal audit checklist
ISO 9001 in Jackson
The Jackson, Tennessee metro has 176 manufacturing establishments, 141 of them with fewer than 100 employees (US Census County Business Patterns, 2023), and 190 durable-goods wholesalers (BLS QCEW, 2024 annual averages). ISO 9001 is the most widely held ISO management system certification and the base that AS9100, ISO 13485 and the other sector standards build on.
ISO 9001 consultants → · Free ISO 9001:2026 gap analysis checklist · Free ISO 9001 internal audit checklist
ISO 45001 in Jackson
The Jackson, Tennessee metro has 176 manufacturing establishments (US Census County Business Patterns, 2023) and 401 construction establishments (BLS QCEW, 2024 annual averages). ISO 45001 turns a safety program into a management system, with hazard identification, worker participation and incident follow-up that a customer, general contractor or insurer can check.
AS9100 in Jackson
The Jackson, Tennessee metro has 4 aerospace product and parts establishments and 13 machine shops (BLS QCEW, 2024 annual averages). AS9100 adds aerospace requirements to ISO 9001, and it reaches machine shops and processors through the purchase orders of the aerospace companies they supply; distributors use AS9120.
ISO 27001 in Jackson
The Jackson, Tennessee metro has 91 computer systems design, software publishing and hosting establishments (BLS QCEW, 2024 annual averages). ISO 27001 is the internationally recognized certification for an information security management system, and a common answer to enterprise customers' security questionnaires.
ISO 27001 consultants → · Free ISO 27001 internal audit checklist · ISO 27001 audit days calculator
ISO 42001 in Jackson
The Jackson, Tennessee metro has 53 software publishers and custom programming firms (BLS QCEW, 2024 annual averages). ISO/IEC 42001 is the management system standard for organizations that develop or use AI, and it fits alongside an existing ISO 27001 system. See which state AI laws reference it.
ISO 13485 in Jackson
The Jackson, Tennessee metro has 3 medical equipment and electromedical device manufacturing establishments (BLS QCEW, 2024 annual averages). ISO 13485 is the quality management standard for medical devices, and since February 2, 2026 the FDA's Quality Management System Regulation incorporates it by reference.
ISO 13485 consultants → · Free ISO 13485 internal audit checklist · ISO 13485 audit days calculator
ISO 17025 in Jackson
The Jackson, Tennessee metro has 2 testing laboratories (BLS QCEW, 2024 annual averages). ISO/IEC 17025 is the accreditation standard for testing and calibration laboratories, including in-house labs whose results customers or regulators rely on.
What an engagement covers
- Applicability review by definition Subpart ZZZZZZ, part 464 and your permits, read against your actual processes, with each conclusion and its reason recorded for the auditor.
- ISO 14001 compliance calendar Periodic compliance reports, violation notices, repeat sampling and record retention on your control authority's schedule, assigned and tracked. See ISO 14001.
- Poured-metal and discharge records Production data the pretreatment standard depends on, kept where the environmental system can use it.
- Management of change New cells, lubricants, alloys and casting methods checked for discharge, air and safety consequences before they run.
- ISO 9001 for non-automotive work A quality system for aerospace, defense, industrial and agricultural customers. See ISO 9001.
- Gap analysis and roadmap Two to four weeks, fixed scope and price, with a clear go or no-go before real money is committed.
- Internal audit and management review Auditor-grade internal audits and a facilitated management review that produces recorded decisions.
Questions we get from companies in this market
Is a die casting plant covered by EPA's foundry air toxics rule?
Not by that rule's foundry definitions. 40 CFR 63 subpart ZZZZZZ covers aluminum, copper and other nonferrous foundries that are area sources, melt at least 600 tons a year and use material containing the listed metals, and its definition of an aluminum foundry excludes die casting. That does not mean no air rules apply: Tennessee's air permitting rules and any permit you hold still govern your furnaces and the rest of the plant. Record the applicability decision and recheck it if you add a process that pours metal into molds.
Our Jackson die casting plant discharges process wastewater to the city sewer. What federal standard applies?
The metal molding and casting pretreatment standards in 40 CFR part 464. For die casting operations, 464.15(c) sets limits for copper, lead, zinc, total phenols and total toxic organics, written per million pounds of metal poured, and a plant may monitor oil and grease instead of toxic organics. The general pretreatment rules in 40 CFR 403.12 add periodic compliance reports, prompt notice of violations and record retention. Your control authority's permit sets the numbers you actually meet.
Do we need ISO 14001 certification to meet those rules?
No. Neither rule names ISO 14001. What ISO 14001 gives a Jackson die caster is a working method for deciding which rules apply, keeping the dated obligations on schedule and catching process changes before they change the discharge. Certification is worth having when a customer asks for it or when you want an independent check that the method runs.
Which OSHA program covers a plant in Jackson, Tennessee?
Tennessee's. TOSHA, the State Plan run by the Tennessee Department of Labor and Workforce Development, covers private-sector workplaces in the state, with listed exceptions such as employment at Tennessee Valley Authority facilities and on military bases. An ISO 45001 legal register for a Jackson plant should be built from Tennessee's program rather than from federal sources alone.
How many manufacturers are in the Jackson, Tennessee metro?
On the federal metropolitan definition, 176 manufacturing establishments, 141 of them with fewer than 100 employees, employing about 14,353 people (US Census County Business Patterns, 2023). That definition covers Madison, Chester, Crockett and Gibson counties. Figures for Jackson, Mississippi or Jackson, Michigan describe different metros.
What will ISO 14001 certification cost?
Audit days are set mainly from the number of people within your certification scope, then adjusted for the complexity of your environmental aspects and the number of sites. Our certification cost guide explains how audit days are set, and the audit days calculator gives an estimate.