Skip to content

Albany, New York

ISO consultants for Capital Region firms that sell to New York State.

In the state capital, the biggest customer is the state. Its security policy reaches vendors and contractors, and one state authority tells vendors to comply with ISO 27001, 27005 and 27035, down through their own supply chain.

ISO certification consulting in Albany at a glance

Who we are
Glocal Insight: senior ISO management system consultants working with Albany companies on site and remotely. The consultant who scopes the work does the work.
Standards
ISO 9001, AS9100, ISO 14001, ISO 45001, ISO 27001, ISO 42001, ISO 13485, ISO 17025, plus internal audits, auditor training and ISO certification maintenance.
Typical timeline
For ISO 9001 at a company of 10 to 100 people, about three to four months from kickoff to the Stage 2 audit. Week by week.
Cost
A standalone gap analysis is typically in the low five figures; full implementation depends on scope. Certification body fees are separate. How certification costs are set, or estimate your audit days.
Track record
100% certification success. 100% of surveyed clients would recommend us.
Contact
(816) 535-0738 or start a conversation.

When New York State is your customer

The Albany-Schenectady-Troy metropolitan area is five counties: Albany, Rensselaer, Schenectady, Saratoga and Schoharie. It has 588 manufacturing establishments, 539 of them with fewer than 100 employees — 92% of the base — employing about 28,790 people (US Census County Business Patterns, 2023). But the defining customer here is not a plant. It is the state.

State government employs about 49,280 people in this metro, at 3.5 times the national concentration, roughly one job in nine of all covered employment (BLS QCEW, 2024 annual averages). For a Capital Region software house, data processor, engineering firm or managed service provider, a New York State agency can be the largest account on the books.

That customer publishes its security rules. The state's Information Security Policy, NYS-P03-002, sets the “mandatory minimum information security requirements for all State Entities”, and it applies to “all third parties (such as local governments, consultants, vendors, and contractors)” and to systems managed or hosted by third parties on an agency's behalf.

And one state authority goes further. Empire State Development attaches an IT Security Standard Brief to requests for proposals that tells vendors they “must comply with ISO Standards 27001, 27005 and 27035” as they relate to the protection of its network. The word is comply, and the requirement reaches your own suppliers too.

Industry in Albany

  • New York State government About 49,280 state government jobs in the metro, 3.5 times the national concentration (BLS QCEW, 2024 annual averages).
  • NYS Office of Information Technology Services Issues the statewide Information Security Policy, NYS-P03-002, which applies to agency vendors and contractors.
  • Empire State Development State economic development authority whose IT Security Standard Brief names ISO 27001, 27005 and 27035 for vendors.
  • GE Vernova Steam and generator assembly and testing center in Schenectady; $41 million expansion for H65 and H84 generators announced August 2025.
  • GE Vernova Advanced Research Center Research campus in Niskayuna, Schenectady County; $96 million investment committed January 2025.

What the state's security policy asks of a vendor

NYS-P03-002 is written for agencies, but several of its rules land directly on the companies that work for them. Read it with your contracts beside it, because the policy tells agencies to write some of these requirements into third-party agreements.

Risk assessments follow the work. The policy requires them “regardless of whether the work is done by the SE, a vendor/contractor”. Expect an agency to ask how you assess risk on the system you run for it, and to want the answer in writing.

Testing goes into the contract. “Vulnerability scanning, penetration testing, and mitigation provisions must be included in third party agreements.” Where an agency has outsourced a system to you, scanning and testing must be coordinated with it.

Controls are tied to data classification. Each classification carries a baseline control set “aligned with NIST 800-53B”, to be tailored to the business need. Offshore access is restricted: third parties working for an agency must follow the state's separate International Access policy, NYS-P23-001.

What the policy does not do is name ISO/IEC 27001. ISO/IEC 27002, the control guidance that sits beside 27001, appears only in its list of related documents. So no certificate is required by the policy itself. What is required is a security program that can show risk assessment, classification-based controls, testing and incident handling to an agency that is obliged to ask.

Empire State Development names the ISO standards

Empire State Development's IT Security Standard Brief is more specific. It applies to partners, contractors, vendors, suppliers and other third parties on any engagement with ESD that has a data or IT component, and ESD attaches it to requests for proposals as an appendix.

It names three standards: ISO/IEC 27001 (the information security management system), ISO/IEC 27005 (information security risk management) and ISO/IEC 27035 (incident management). Vendors must comply with them as they relate to the protection of ESD's network, data and systems; a vendor can propose comparable standards, but only with approval from ESD's chief information security officer.

Two further lines change what a vendor has to build. Vendors must “provide documentation certifying that all 3rd party vendors in the supply chain are complying with” those standards as they relate to their role, and must “have monitoring process in place and documented for 3rd party compliance”. In other words, your subcontractors are in scope, and you need records showing you check them.

Comply, certify, and what is worth buying

Compliance is not certification. Neither document says a vendor must hold an accredited ISO 27001 certificate, and an individual RFP or contract can still add one, so read the whole solicitation. But an ISO/IEC 27001 certificate is the cleanest evidence that you comply with 27001, and the management system behind it is built to produce what both documents ask for.

Clause 6.1.2 of ISO/IEC 27001 is a documented risk assessment process, which is what the state's policy asks of vendors. Annex A carries the supplier-relationship, vulnerability-management and incident-management controls that map onto the ESD brief and the testing rule. ISO/IEC 27005 and 27035 are guidance standards that slot into that system as the risk method and the incident procedure. And the supplier-monitoring records ESD asks for are the same records an ISMS keeps for its own suppliers.

We build the system with the state's control baseline in view, so the statement of applicability and the NIST 800-53B baseline an agency works from can be read side by side. That saves a second mapping exercise every time an agency's security office sends a questionnaire.

If you also sell to banks or insurers regulated in New York, the state's financial cybersecurity regulation is a different instrument with its own third-party rules; our New York City page covers it.

AI in state work

ESD's brief adds a line that will matter to more vendors each year: “Use of AI shall comply with all applicable State and Federal Laws and if applicable ESD policies.” It names no AI standard. A vendor putting AI into a state deliverable needs to know which laws and policies apply and to show how its use of AI is governed.

ISO/IEC 42001 is the management system standard for that, and it is built to sit alongside an ISO 27001 system rather than replace it. Our guide to ISO 42001 and AI laws sets out what the standard does and does not prove.

The manufacturing side of the Capital Region

The metro's factories are mostly small: more than nine in ten have fewer than 100 employees. In Schenectady, GE Vernova announced in August 2025 a $41 million investment in its steam and generator assembly and testing center there, expanding production of the H65 and H84 generators that pair with its HA gas turbines, and said its Schenectady commitments since 2023 now total more than $130 million. In January 2025 it committed at least $96 million to its Advanced Research Center in Niskayuna, also in Schenectady County.

Power-generation equipment makers set supplier requirements through purchase documents and supplier manuals. Read what your buyer actually sent you before choosing a standard. For most machine shops, fabricators and electrical suppliers the starting point is ISO 9001, and the same management review, internal audit and document control then carry an ISO 27001 system if your customer's drawings and data need protecting too.

How we work with companies here

We work with Albany companies on site and remotely, and we put the on-site days where being in the room changes the outcome: the risk assessment workshop, the first internal audit and the certification audits.

The most useful first meeting is usually a reading exercise: your current state contracts and RFPs, the security exhibits attached to them, and any security questionnaire an agency has sent you. That settles what you are held to, and by whom, before anyone prices a system.

The consultant who scopes the engagement does the work. No handoff to a junior implementer after the sale.

100% certification success. Every client we have taken to a Stage 2 certification audit has been certified, with no major nonconformities. 100% of surveyed clients would recommend us. Every client who answered our client satisfaction survey said they would recommend Glocal Insight.

ISO standards we help Albany companies with

This page focuses on ISO 27001, and we can help Albany companies with any of the standards below. If you are deciding whether to bring in outside help, start with what an ISO consultant does, how fees work and when certification is worth it.

ISO 27001 in Albany

The Albany metro has 1,106 computer systems design, software publishing and hosting establishments (BLS QCEW, 2024 annual averages). ISO 27001 is the internationally recognized certification for an information security management system, and a common answer to enterprise customers' security questionnaires.

The focus of this page. ISO 27001 consultants → · Free ISO 27001 internal audit checklist · ISO 27001 audit days calculator

ISO 9001 in Albany

The Albany metro has 588 manufacturing establishments, 539 of them with fewer than 100 employees (US Census County Business Patterns, 2023), and 646 durable-goods wholesalers (BLS QCEW, 2024 annual averages). ISO 9001 is the most widely held ISO management system certification and the base that AS9100, ISO 13485 and the other sector standards build on.

ISO 9001 consultants → · Free ISO 9001:2026 gap analysis checklist · Free ISO 9001 internal audit checklist

ISO 42001 in Albany

The Albany metro has 544 software publishers and custom programming firms (BLS QCEW, 2024 annual averages). ISO/IEC 42001 is the management system standard for organizations that develop or use AI, and it fits alongside an existing ISO 27001 system. See which state AI laws reference it.

ISO 42001 consultants →

AS9100 in Albany

The Albany metro has 2 aerospace product and parts establishments and 22 machine shops (BLS QCEW, 2024 annual averages). AS9100 adds aerospace requirements to ISO 9001, and it reaches machine shops and processors through the purchase orders of the aerospace companies they supply; distributors use AS9120.

AS9100 consultants → · Free AS9100 internal audit checklist

ISO 14001 in Albany

The Albany metro has 86 establishments in chemical, plastics and rubber, paper, primary metal, and metal coating and finishing manufacturing (BLS QCEW, 2024 annual averages), the industries where air, water and waste obligations tend to be heaviest. ISO 14001 gives a site one system for its permits, its environmental aspects and its customers' sustainability questionnaires.

ISO 14001 consultants → · Free ISO 14001:2026 gap analysis checklist · Free ISO 14001 internal audit checklist

ISO 45001 in Albany

The Albany metro has 588 manufacturing establishments (US Census County Business Patterns, 2023) and 2,242 construction establishments (BLS QCEW, 2024 annual averages). ISO 45001 turns a safety program into a management system, with hazard identification, worker participation and incident follow-up that a customer, general contractor or insurer can check.

ISO 45001 consultants →

ISO 13485 in Albany

The Albany metro has 20 medical equipment and electromedical device manufacturing establishments (BLS QCEW, 2024 annual averages). ISO 13485 is the quality management standard for medical devices, and since February 2, 2026 the FDA's Quality Management System Regulation incorporates it by reference.

ISO 13485 consultants → · Free ISO 13485 internal audit checklist · ISO 13485 audit days calculator

ISO 17025 in Albany

The Albany metro has 25 testing laboratories (BLS QCEW, 2024 annual averages). ISO/IEC 17025 is the accreditation standard for testing and calibration laboratories, including in-house labs whose results customers or regulators rely on.

ISO 17025 consultants →

What an engagement covers

  • State contract security review We read the security terms in your agency contracts and RFPs, including NYS-P03-002 obligations and ESD's IT Security Standard Brief, and list what each one asks you to show.
  • ISO 27001 system built for state work Risk assessment, statement of applicability and incident procedure built to the standard, with the state's NIST-aligned baseline mapped alongside. See ISO 27001.
  • Supply-chain compliance records Supplier security requirements, monitoring and evidence for your own subcontractors, the part of ESD's brief that reaches beyond your own company.
  • ISO 42001 for AI in deliverables An AI management system on top of your ISMS, for vendors building AI into state work. See ISO 42001.
  • ISO 9001 for Capital Region manufacturers A quality management system built around your customers' purchase documents. See ISO 9001.
  • Gap analysis and roadmap Two to four weeks, fixed scope and price, with a clear go or no-go before real money is committed.
  • Internal audit and management review Auditor-grade internal audits and a facilitated management review that produces recorded decisions.

Questions we get from companies in this market

Does New York State require ISO 27001 certification from its vendors?

Not as a general rule. The state's Information Security Policy, NYS-P03-002, applies to vendors and contractors but does not name ISO 27001; it lists ISO/IEC 27002 among related documents and ties its control baselines to NIST 800-53B. Empire State Development's IT Security Standard Brief says vendors must comply with ISO 27001, 27005 and 27035 as they relate to its network, which is compliance, not certification. An individual RFP or contract can add a certificate requirement, so read the whole solicitation.

What does NYS-P03-002 mean for a company that runs a system for a state agency?

Several rules reach you through the agency. Risk assessments are required whether the agency or a vendor does the work. Vulnerability scanning, penetration testing and mitigation provisions must be included in third-party agreements, and testing must be coordinated where a system is outsourced. Third parties must follow the state's International Access policy, NYS-P23-001. Expect these to appear in your contract and in agency security questionnaires.

ESD's RFP says our supply chain must comply with ISO standards. What does that involve?

The brief asks vendors to provide documentation certifying that all third-party vendors in their supply chain are complying with ISO 27001, 27005 and 27035 as they relate to their role, and to have a documented monitoring process for third-party compliance. In practice that means written security requirements for your subcontractors, a way of checking them, and records of the checks. An ISO 27001 system's supplier-relationship controls are built to produce exactly those records.

Is this the same as New York's DFS cybersecurity regulation?

No. The financial services cybersecurity regulation (23 NYCRR 500) governs banks, insurers and other entities regulated by the Department of Financial Services, and reaches vendors through those firms. NYS-P03-002 and ESD's brief govern state agencies and the companies that work for them. A Capital Region vendor can be subject to both, through different customers, and one ISO 27001 system can carry both sets of obligations.

How many manufacturers are in the Capital Region?

On the federal metropolitan definition, 588 manufacturing establishments, 539 of them with fewer than 100 employees, employing about 28,790 people (US Census County Business Patterns, 2023). That definition covers Albany, Rensselaer, Schenectady, Saratoga and Schoharie counties. Montgomery, Warren, Washington, Fulton and Columbia counties belong to the wider combined statistical area but not to the metropolitan area, so figures that include them describe a larger market.

What will ISO 27001 certification cost?

Audit days are set from the number of people within your certification scope, adjusted for the complexity of the information systems involved. A firm that scopes the certificate to the service it delivers to the state, rather than the whole company, can keep the audit smaller, provided the scope still covers what the customer relies on. Our certification cost breakdown explains how the audit time is calculated.