Miami, Florida
ISO consultants for South Florida manufacturers and NOA holders.
Miami-Dade requires manufacturers of NOA-approved products to run a quality assurance program, audited yearly. That program covers much of ISO 9001, and one system can serve both.
ISO certification consulting in Miami at a glance
- Who we are
- Glocal Insight: senior ISO management system consultants working with Miami companies on site and remotely. The consultant who scopes the work does the work.
- Standards
- ISO 9001, AS9100, ISO 14001, ISO 45001, ISO 27001, ISO 42001, ISO 13485, ISO 17025, plus internal audits, auditor training and ISO certification maintenance.
- Typical timeline
- For ISO 9001 at a company of 10 to 100 people, about three to four months from kickoff to the Stage 2 audit. Week by week.
- Cost
- A standalone gap analysis is typically in the low five figures; full implementation depends on scope. Certification body fees are separate. How certification costs are set, or estimate your audit days.
- Track record
- 100% certification success. 100% of surveyed clients would recommend us.
- Contact
- (816) 535-0738 or start a conversation.
The quality program the county already audits
The Miami metro has 4,683 manufacturing establishments, 4,524 of them with fewer than 100 employees — about 97% of the base — employing around 80,600 people across Miami-Dade, Broward and Palm Beach counties (US Census County Business Patterns, 2023, Miami-Fort Lauderdale-West Palm Beach MSA).
Two of those three counties sit inside the Florida Building Code's High-Velocity Hurricane Zone: Miami-Dade and Broward. Building products approved for that zone through Miami-Dade County's Product Control Section — windows, doors, louvers and roofing — carry a Notice of Acceptance, the NOA.
The NOA starts with testing. It is also a quality system requirement. The county's own application form says that manufacturers of approved products shall implement a quality assurance program, and that audits will be conducted on a yearly basis.
Read the county's guideline for that program and the structure is familiar: a management statement on quality policy and objectives, a designated quality person with direct access to top management, document control, traceability, incoming material checks, nonconforming product, calibration, records and design change control. The guideline lists ANSI/ISO/ASQ Q9001:2015 among its references. It does not require ISO 9001, and an ISO 9001 certificate does not replace the county's audit. But a manufacturer that runs the two separately is maintaining two quality manuals for one factory.
Industry in Miami
- Miami-Dade Product Control Section Issues Notices of Acceptance for High-Velocity Hurricane Zone products and audits holders' quality assurance programs yearly
- Window and door makers in Doral, Medley and Opa-locka NOA holders on the county's published register, each required to run a county-audited quality assurance program
- HEICO Corporation Headquartered in Hollywood, Broward County; classified under aircraft engines and engine parts
- Carrier Global Headquartered in Palm Beach Gardens; air conditioning, heating and refrigeration equipment
- OPKO Health Headquartered in Miami; classified under pharmaceutical preparations
What the county audits, item by item
The Product Control Section's quality assurance audit checklist has four parts: the quality assurance manual; NOA labeling and identification; production, quality control and traceability; and third-party audits, findings and complaints.
The questions are specific. Is the manual reviewed or revised annually, and are copies controlled? Does it identify which facility makes which NOA product? Are incoming materials inspected against the NOA specification, with purchase orders, mill certificates and certificates of analysis kept? Can finished product be traced back to production records? Are measuring devices calibrated, with records and schedules? Are nonconforming materials segregated? Does advertising of NOA products conform to the NOA? Are field complaints documented and addressed?
The manufacturer guideline adds the timing. Third-party audit and inspection reports go to the Product Control Section no later than ten days after the audit, and audit records are kept for at least three years. Each NOA also reserves the county's right to test the product for quality assurance purposes, with the manufacturer paying for the testing if the product fails.
The register is not only local. NOAs on the county's published list go to window makers in Doral, Medley and Opa-locka, and also to manufacturers far outside Florida: one recently issued NOA covers walk-in coolers made in Mississippi. Wherever the plant is, the quality assurance program is part of holding the approval.
One system, two audiences
Almost every item in the county's guideline and checklist has a home in ISO 9001. The management statement is the quality policy and objectives. The designated quality person is the assignment of responsibility and authority. Annual manual review is document control. Traceability, labeling and identification sit in the production controls. Calibration is monitoring and measuring resources. Segregation of nonconforming material is control of nonconforming outputs, and the county's design change section closely follows ISO 9001's clause on design and development changes.
Built that way, the NOA quality assurance manual becomes a controlled extract of the ISO 9001 system rather than a second document that drifts. One internal audit program covers both. One corrective action log answers both the county's findings and the certification body's. One management review looks at county audit results alongside customer complaints, which is where they belong.
The ISO 9001 side covers ground the county's checklist does not: risk-based planning, supplier evaluation, customer satisfaction, and a management review with recorded decisions. Those are the parts that turn a manual that passes an audit into a system that improves.
Where the test data comes from
Approval rests on test results, and Florida's product approval rule is precise about who may produce them. Under rule 61G20-3.008 of the Florida Administrative Code, testing laboratories must be accredited by a recognized body — the rule names A2LA and NVLAP — as meeting ISO/IEC 17025, and approval is limited to the procedures listed on the certificate of accreditation. Certification agencies and evaluation entities must meet ISO/IEC 17065. Quality assurance agencies, which audit manufacturers' programs at intervals not exceeding twelve months, must meet ISO/IEC 17020.
For a South Florida laboratory testing windows, doors or roofing, that clause about the certificate decides which state approvals its results can support. Under the state rule, a test outside the accredited scope cannot support a state product approval. The scope document deserves the same attention as the test rig. See ISO/IEC 17025.
The rest of the metro
Palm Beach County is not in the High-Velocity Hurricane Zone. That is about where products are installed, not where they are made: a Palm Beach plant can hold a Miami-Dade NOA for products sold into the zone, and its quality assurance program is then part of holding that approval, as it is for the out-of-state holders on the register.
The metro also carries aerospace: an aircraft engine and parts company is headquartered in Hollywood, in Broward County. Separately, an air conditioning and refrigeration equipment maker has its headquarters in Palm Beach Gardens. For companies that manufacture aircraft parts, AS9100 is the relevant quality standard and work we support. The distributor variant, AS9120, is also work we support; the repair-station variant, AS9110, is specialist work outside our scope, and an FAA Part 145 repair station certificate is a regulatory approval rather than an ISO standard.
Florida has no OSHA state plan. Federal OSHA covers most private-sector workers across all three counties, which keeps an ISO 45001 legal register simpler here than in a state-plan state.
How we work with companies here
We work with Miami companies on site and remotely, and we put the on-site days where being in the building changes the outcome — the gap analysis walkthrough, the first internal audit cycle and the certification audits. For an NOA holder we also plan around the yearly quality assurance audit, so the two audits support each other rather than collide.
The most useful first meeting is usually a side-by-side read of two documents you already have: your NOA quality assurance manual and your last county audit report. Together they show how much of an ISO 9001 system you are already running, and what is missing.
The consultant who scopes the engagement does the work. No handoff to a junior implementer after the sale.
100% certification success. Every client we have taken to a Stage 2 certification audit has been certified, with no major nonconformities. 100% of surveyed clients would recommend us. Every client who answered our client satisfaction survey said they would recommend Glocal Insight.
ISO standards we help Miami companies with
This page focuses on ISO 9001, and we can help Miami companies with any of the standards below. If you are deciding whether to bring in outside help, start with what an ISO consultant does, how fees work and when certification is worth it.
ISO 9001 in Miami
The Miami–Fort Lauderdale–West Palm Beach metro has 4,683 manufacturing establishments, 4,524 of them with fewer than 100 employees (US Census County Business Patterns, 2023), and 8,985 durable-goods wholesalers (BLS QCEW, 2024 annual averages). ISO 9001 is the most widely held ISO management system certification and the base that AS9100, ISO 13485 and the other sector standards build on.
The focus of this page. ISO 9001 consultants → · Free ISO 9001:2026 gap analysis checklist · Free ISO 9001 internal audit checklist
ISO 27001 in Miami
Florida's data security law gives a vendor holding a client's data ten days, after determining a breach, to tell that client. The client then has 30 days to notify the people affected. The Miami–Fort Lauderdale–West Palm Beach metro has 8,884 computer systems design, software publishing and hosting establishments (BLS QCEW, 2024 annual averages). ISO 27001 is the internationally recognized certification for an information security management system, and a common answer to enterprise customers' security questionnaires.
ISO 27001 in Miami: the full page → · Free ISO 27001 internal audit checklist · ISO 27001 audit days calculator
ISO 13485 in Miami
Florida requires a device manufacturer permit of anyone who manufactures, repackages or assembles medical devices for human use in the state, and it asks for your FDA evidence when you apply and at every renewal. The Miami–Fort Lauderdale–West Palm Beach metro has 442 medical equipment and electromedical device manufacturing establishments (BLS QCEW, 2024 annual averages). ISO 13485 is the quality management standard for medical devices, and since February 2, 2026 the FDA's Quality Management System Regulation incorporates it by reference.
ISO 13485 in Miami: the full page → · Free ISO 13485 internal audit checklist · ISO 13485 audit days calculator
ISO 17025 in Miami
The Miami–Fort Lauderdale–West Palm Beach metro has 192 testing laboratories (BLS QCEW, 2024 annual averages). ISO/IEC 17025 is the accreditation standard for testing and calibration laboratories, including in-house labs whose results customers or regulators rely on.
AS9100 in Miami
The Miami–Fort Lauderdale–West Palm Beach metro has 178 aerospace product and parts establishments and 105 machine shops (BLS QCEW, 2024 annual averages). AS9100 adds aerospace requirements to ISO 9001, and it reaches machine shops and processors through the purchase orders of the aerospace companies they supply; distributors use AS9120.
ISO 45001 in Miami
The Miami–Fort Lauderdale–West Palm Beach metro has 4,683 manufacturing establishments (US Census County Business Patterns, 2023) and 21,216 construction establishments (BLS QCEW, 2024 annual averages). ISO 45001 turns a safety program into a management system, with hazard identification, worker participation and incident follow-up that a customer, general contractor or insurer can check.
ISO 14001 in Miami
The Miami–Fort Lauderdale–West Palm Beach metro has 839 establishments in chemical, plastics and rubber, paper, primary metal, and metal coating and finishing manufacturing (BLS QCEW, 2024 annual averages), the industries where air, water and waste obligations tend to be heaviest. ISO 14001 gives a site one system for its permits, its environmental aspects and its customers' sustainability questionnaires.
ISO 14001 consultants → · Free ISO 14001:2026 gap analysis checklist · Free ISO 14001 internal audit checklist
ISO 42001 in Miami
The Miami–Fort Lauderdale–West Palm Beach metro has 4,818 software publishers and custom programming firms (BLS QCEW, 2024 annual averages). ISO/IEC 42001 is the management system standard for organizations that develop or use AI, and it fits alongside an existing ISO 27001 system. See which state AI laws reference it.
What an engagement covers
- NOA-to-ISO 9001 mapping Each requirement of the county's quality assurance guideline and audit checklist mapped to the ISO 9001 clause that covers it, so one manual serves both audits.
- ISO 9001 system build A quality management system designed around your processes, your NOAs and your customers' supplier qualification. See ISO 9001.
- ISO/IEC 17025 for testing laboratories Scope-first accreditation work for laboratories whose results support product approvals. See ISO/IEC 17025.
- AS9100 for aircraft parts manufacturers Aerospace quality management for manufacturers of parts and assemblies. See AS9100.
- Gap analysis and roadmap Two to four weeks, fixed scope and price, with a clear go or no-go before real money is committed.
- Internal audit program One internal audit schedule covering the ISO 9001 clauses and the county checklist items together.
- Management review A facilitated review that puts county audit results, customer complaints and corrective actions in front of the people who decide.
Questions we get from companies in this market
Does a Miami-Dade Notice of Acceptance require ISO 9001 certification?
No. The county's NOA application requires manufacturers of approved products to implement a quality assurance program, with audits on a yearly basis, and its guideline sets out what that program must contain. The guideline lists ANSI/ISO/ASQ Q9001:2015 among its references, but it does not require certification, and an ISO 9001 certificate does not replace the county's audit. The practical point is that the two systems cover much of the same ground, so one well-built ISO 9001 system can carry the NOA quality assurance manual inside it.
We already have an NOA quality assurance manual. How much of ISO 9001 is left to do?
Usually less than people expect on the production side and more on the management side. The county's guideline already asks for a quality policy statement, a designated quality person, document control, traceability, incoming inspection, nonconforming product, calibration, records and design change control. ISO 9001 adds risk-based planning, supplier evaluation, customer satisfaction monitoring, internal audits across the whole system and a management review with recorded decisions. A gap analysis against your existing manual will put a number on it.
Does the High-Velocity Hurricane Zone include Palm Beach County?
No. The Florida Building Code's High-Velocity Hurricane Zone covers Miami-Dade and Broward counties. Palm Beach County is part of the same metropolitan area, but not part of that zone.
Does our test laboratory need ISO/IEC 17025 accreditation for Florida product approval?
For state product approval, yes. Florida Administrative Code rule 61G20-3.008 requires testing laboratories to be accredited by a recognized accreditation body as meeting ISO/IEC 17025, and limits a laboratory's approval to the procedures listed on its certificate of accreditation. That makes the scope of accreditation the document that decides which approvals your results can support.
We make aircraft parts in Broward County. Which standard applies?
For a manufacturer of parts, AS9100 is the aerospace quality management standard, and we support it. If your business distributes parts, the standard is AS9120, which we also support. If it repairs them, it is AS9110, which is specialist work outside our scope. An FAA Part 145 repair station certificate is a separate regulatory approval issued by the FAA, not an ISO standard.
What does ISO 9001 certification cost for a small Miami manufacturer?
Audit days are set from the number of people within your scope against a published table, then adjusted for factors such as system maturity and the number of sites. If you already hold NOAs, much of the production-side documentation exists, which shortens implementation rather than the audit itself. Our certification cost breakdown explains how audit days are set.