Montgomery, Alabama
ISO consultants for Montgomery auto parts suppliers and manufacturers.
OSHA's Atlanta region runs an emphasis program for auto parts plants. Its directive says every listed plant with ten or more employees will get a comprehensive safety inspection, focused on lockout/tagout, machine guarding and electrical hazards.
ISO certification consulting in Montgomery at a glance
- Who we are
- Glocal Insight: senior ISO management system consultants working with Montgomery companies on site and remotely. The consultant who scopes the work does the work.
- Standards
- ISO 9001, AS9100, ISO 14001, ISO 45001, ISO 27001, ISO 42001, ISO 13485, ISO 17025, plus internal audits, auditor training and ISO certification maintenance.
- Typical timeline
- For ISO 9001 at a company of 10 to 100 people, about three to four months from kickoff to the Stage 2 audit. Week by week.
- Cost
- A standalone gap analysis is typically in the low five figures; full implementation depends on scope. Certification body fees are separate. How certification costs are set, or estimate your audit days.
- Track record
- 100% certification success. 100% of surveyed clients would recommend us.
- Contact
- (816) 535-0738 or start a conversation.
An inspection program written for this supply base
The Montgomery metropolitan area is four counties: Autauga, Elmore, Lowndes and Montgomery. Selma, in Dallas County, belongs to the wider combined region but not to the metro. The four counties have 262 manufacturing establishments, 228 of them with fewer than 100 employees — 87% of the base — employing about 19,798 people (US Census County Business Patterns, 2023). Manufacturing runs at about 1.5 times its national share of private employment, and 26 of the metro’s manufacturing establishments make motor vehicle parts (BLS QCEW, 2024 annual averages).
At the center of that chain is the assembly plant of Hyundai Motor Manufacturing Alabama, headquartered in Montgomery. Its fact sheet, dated May 2025, describes 4,200 team members, capacity for 390,000 vehicles a year, the Tucson, Santa Fe, Santa Cruz and Genesis GV70 lines, an engine operation, and about $3.1 billion of its roughly $6.3 billion in annual spending going to Alabama-based businesses.
OSHA has a program aimed at exactly that supply base. Its Atlanta region runs a Regional Emphasis Program for Safety Hazards in the Auto Parts Industry, directive CPL 23/10, covering motor vehicle parts manufacturing (NAICS 3363). It applies to five area offices, including the Mobile Area Office, whose jurisdiction includes all four counties of the Montgomery metro.
The directive is plain about what it does. All establishments with 10 or more employees on the list will be inspected, and every inspection is a comprehensive safety inspection focused on lockout/tagout, machine guarding and electrical hazards. For a parts plant here, an OSHA visit is a scheduled likelihood, and what it will look at is written down.
Industry in Montgomery
- Hyundai Motor Manufacturing Alabama Headquartered in Montgomery; its May 2025 fact sheet describes 4,200 team members, 390,000 vehicles a year of capacity and about $3.1 billion of annual spending with Alabama-based businesses
- Motor vehicle parts makers 26 establishments in the metro (BLS QCEW, 2024), the industry OSHA's Region IV emphasis program CPL 23/10 targets
- OSHA Mobile Area Office Jurisdiction over 37 Alabama counties, including Autauga, Elmore, Lowndes and Montgomery; one of five area offices running the auto parts emphasis program
- Transportation equipment manufacturing 40 establishments in the metro (BLS QCEW, 2024)
- The manufacturing base 228 of 262 establishments under 100 employees (Census CBP, 2023); manufacturing at about 1.5 times its national share of private employment (BLS QCEW, 2024)
How a plant gets on the list, and how it gets off
The area office builds its list from OSHA’s own inspection history, automobile manufacturers, the internet, local knowledge and manufacturers’ directories. Supplying an assembly plant is, in practice, how a company ends up on it.
The directive gives only two reasons to drop an establishment: it had a comprehensive safety inspection in the two years before the program took effect, or it turns out not to operate in the motor vehicle parts industry. A management system certificate is not on that list. ISO 45001 does not keep you out of an inspection. What it changes is what the inspector finds.
Where health hazards turn up during a safety inspection, the directive has the compliance officer refer the case to an industrial hygienist, with that inspection opened within five working days. A plant that has never measured noise or chemical exposure should expect that referral to find the gap.
Why OSHA picked these three hazards
The directive gives its reasons. Using BLS data, it puts the auto parts industry’s 2021 injury and illness rate at 3.3 per 100 full-time workers, against 2.7 for private industry, and its rate of cases with days away, restricted work or transfer at 2.1, against 1.7.
It also counts its own history. From October 2013 to September 2022, Region IV completed 299 inspections in the industry. Of the 216 inspections that found an establishment not in compliance, more than 87.5% resulted in serious, repeat or willful violations. Of 793 violations cited, 246 were lockout/tagout and 179 were machine guarding; 24 were willful and 53 were repeat.
Those numbers point at the same weakness. Lockout/tagout and guarding failures are rarely about missing equipment. They come from procedures that drifted, inspections nobody did, and training that was never repeated when the line changed.
What the lockout rule asks for, and where ISO 45001 carries it
OSHA’s control of hazardous energy standard, 29 CFR 1910.147, is itself a small management system. It requires a program of energy control procedures, employee training and periodic inspections. Procedures must be developed, documented and used. The employer must inspect each energy control procedure at least annually and certify each inspection, identifying the machine or equipment. Training must be certified and kept up to date, and retraining is required whenever job assignments change, among other triggers the rule lists.
Those are the obligations that slip in a busy parts plant: the annual inspection that was skipped during a model launch, the new press that went in without a procedure, the transferred operator who was never retrained. An ISO 45001 system puts them on a schedule. Hazard identification covers every new machine, change management catches line changes, internal audits test whether the annual inspections and certifications exist, and management review sees the results.
None of that replaces the OSHA standard. ISO 45001 does not tell you how to guard a press. It makes sure the guarding, lockout and electrical work you are already required to do is done, recorded and checked, so the evidence is in the file on the day an inspector arrives.
The program's end date, and why it matters less than it seems
The directive took effect on February 5, 2023, replacing an earlier directive on the same industry, and says it expires four years from that date, on February 5, 2027, unless extended. Either way, the hazards it targets are cited under general OSHA standards with or without an emphasis program. Build the system around lockout, guarding and electrical safety, not around the program’s calendar.
Quality systems in the same plants
Where an automotive customer asks for IATF 16949, that is specialist work outside our scope. For Montgomery plants whose customers ask for ISO 9001, or that want one quality and safety system rather than two, we build ISO 9001 and ISO 45001 together so they share document control, internal audit and management review.
Our Birmingham page covers how customer requirements flow down through Alabama’s supply chains, and our Mobile page covers the shipyard and aerospace work in the other big metro under the same OSHA area office.
How we work with companies here
We work with Montgomery companies on site and remotely, and we put the on-site days where being in the building changes the outcome: the gap analysis walkthrough of the production floor, the first internal audit cycle and the certification audits.
The most useful first step here is a floor walk with your lockout procedures in hand: every machine, its written procedure, the date of its last periodic inspection and certification, and the training records for the people who run and maintain it. That shows where the system is before anyone prices one.
The consultant who scopes the engagement does the work. No handoff to a junior implementer after the sale.
100% certification success. Every client we have taken to a Stage 2 certification audit has been certified, with no major nonconformities. 100% of surveyed clients would recommend us. Every client who answered our client satisfaction survey said they would recommend Glocal Insight.
ISO standards we help Montgomery companies with
This page focuses on ISO 45001, and we can help Montgomery companies with any of the standards below. If you are deciding whether to bring in outside help, start with what an ISO consultant does, how fees work and when certification is worth it.
ISO 45001 in Montgomery
The Montgomery metro has 262 manufacturing establishments (US Census County Business Patterns, 2023) and 717 construction establishments (BLS QCEW, 2024 annual averages). ISO 45001 turns a safety program into a management system, with hazard identification, worker participation and incident follow-up that a customer, general contractor or insurer can check.
The focus of this page. ISO 45001 consultants →
ISO 9001 in Montgomery
The Montgomery metro has 262 manufacturing establishments, 228 of them with fewer than 100 employees (US Census County Business Patterns, 2023), and 218 durable-goods wholesalers (BLS QCEW, 2024 annual averages). ISO 9001 is the most widely held ISO management system certification and the base that AS9100, ISO 13485 and the other sector standards build on.
ISO 9001 consultants → · Free ISO 9001:2026 gap analysis checklist · Free ISO 9001 internal audit checklist
ISO 14001 in Montgomery
The Montgomery metro has 39 establishments in chemical, plastics and rubber, paper, primary metal, and metal coating and finishing manufacturing (BLS QCEW, 2024 annual averages), the industries where air, water and waste obligations tend to be heaviest. ISO 14001 gives a site one system for its permits, its environmental aspects and its customers' sustainability questionnaires.
ISO 14001 consultants → · Free ISO 14001:2026 gap analysis checklist · Free ISO 14001 internal audit checklist
AS9100 in Montgomery
The Montgomery metro has 6 aerospace product and parts establishments and 12 machine shops (BLS QCEW, 2024 annual averages). AS9100 adds aerospace requirements to ISO 9001, and it reaches machine shops and processors through the purchase orders of the aerospace companies they supply; distributors use AS9120.
ISO 27001 in Montgomery
The Montgomery metro has 415 computer systems design, software publishing and hosting establishments (BLS QCEW, 2024 annual averages). ISO 27001 is the internationally recognized certification for an information security management system, and a common answer to enterprise customers' security questionnaires.
ISO 27001 consultants → · Free ISO 27001 internal audit checklist · ISO 27001 audit days calculator
ISO 42001 in Montgomery
The Montgomery metro has 142 software publishers and custom programming firms (BLS QCEW, 2024 annual averages). ISO/IEC 42001 is the management system standard for organizations that develop or use AI, and it fits alongside an existing ISO 27001 system. See which state AI laws reference it.
ISO 13485 in Montgomery
The Montgomery metro has 11 medical equipment and electromedical device manufacturing establishments (BLS QCEW, 2024 annual averages). ISO 13485 is the quality management standard for medical devices, and since February 2, 2026 the FDA's Quality Management System Regulation incorporates it by reference.
ISO 13485 consultants → · Free ISO 13485 internal audit checklist · ISO 13485 audit days calculator
ISO 17025 in Montgomery
The Montgomery metro has 9 testing laboratories (BLS QCEW, 2024 annual averages). ISO/IEC 17025 is the accreditation standard for testing and calibration laboratories, including in-house labs whose results customers or regulators rely on.
What an engagement covers
- Emphasis program readiness review A walk through lockout/tagout, machine guarding and electrical safety against what the directive says inspectors will focus on, with a prioritized fix list.
- Energy control program in the system Procedures for every machine, annual periodic inspections with certifications, and training and retraining records, scheduled and audited.
- ISO 45001 certification An occupational health and safety management system built around your actual hazards and taken through certification. See ISO 45001.
- Change management for line changes New presses, moved cells and model launches trigger hazard review, new procedures and retraining before production starts.
- Combined ISO 9001 and ISO 45001 One set of document control, internal audit and management review for quality and safety. See ISO 9001.
- Gap analysis and roadmap Two to four weeks, fixed scope and price, with a clear go or no-go before real money is committed.
- Internal audit and supervisor training Auditor-grade internal audits and training for the supervisors who keep lockout and guarding working on every shift.
Questions we get from companies in this market
Is OSHA targeting auto parts suppliers in the Montgomery area?
Yes. OSHA’s Atlanta region runs a Regional Emphasis Program for safety hazards in the auto parts industry, directive CPL 23/10, covering motor vehicle parts manufacturing. It applies to five area offices, including the Mobile Area Office, which covers Autauga, Elmore, Lowndes and Montgomery counties. All listed establishments with 10 or more employees are to receive comprehensive safety inspections focused on lockout/tagout, machine guarding and electrical hazards.
Will ISO 45001 certification keep our plant off OSHA's list?
No. The directive drops an establishment only if it had a comprehensive safety inspection in the two years before the program took effect or does not operate in the motor vehicle parts industry. Certification is not an exemption. What ISO 45001 does is make sure the lockout procedures, annual inspections, guarding and training records the inspector will look for exist and are current.
Which OSHA office covers Montgomery?
OSHA’s Mobile Area Office. Its jurisdiction covers 37 Alabama counties, including all four counties of the Montgomery metropolitan area: Autauga, Elmore, Lowndes and Montgomery. The Birmingham Area Office covers the other 30 counties, across northern and central Alabama.
What does OSHA's lockout/tagout rule require us to inspect every year?
Under 29 CFR 1910.147, the employer must conduct a periodic inspection of each energy control procedure at least annually and certify that it was performed, identifying the machine or equipment the procedure covers. Training must also be certified and kept up to date, with retraining when job assignments change. In the emphasis program’s own figures, lockout/tagout accounted for 246 of the 793 violations OSHA cited in the industry across Region IV from 2013 to 2022.
How many manufacturers are in the Montgomery metro?
On the federal metropolitan definition, 262 manufacturing establishments, 228 of them with fewer than 100 employees, employing about 19,798 people (US Census County Business Patterns, 2023). That definition covers Autauga, Elmore, Lowndes and Montgomery counties. Dallas County, home to Selma, is in the wider combined statistical area but not the metropolitan area.
What will certification cost?
Most of the cost is set by audit days, which depend on the number of people in your certification scope, the risk of the work and the number of sites. Our certification cost breakdown explains how audit days are set, and the audit days calculator gives an estimate for your headcount.