Skip to content

Reno, Nevada

ISO consultants for Reno-area manufacturers, warehouses and contractors.

Nevada law already requires a written safety program above ten employees and a safety committee above 25. Built properly, that program is most of an ISO 45001 system. Start from what the state already asks of you.

ISO certification consulting in Reno at a glance

Who we are
Glocal Insight: senior ISO management system consultants working with Reno companies on site and remotely. The consultant who scopes the work does the work.
Standards
ISO 9001, AS9100, ISO 14001, ISO 45001, ISO 27001, ISO 42001, ISO 13485, ISO 17025, plus internal audits, auditor training and ISO certification maintenance.
Typical timeline
For ISO 9001 at a company of 10 to 100 people, about three to four months from kickoff to the Stage 2 audit. Week by week.
Cost
A standalone gap analysis is typically in the low five figures; full implementation depends on scope. Certification body fees are separate. How certification costs are set, or estimate your audit days.
Track record
100% certification success. 100% of surveyed clients would recommend us.
Contact
(816) 535-0738 or start a conversation.

The safety program Nevada already requires

The Reno metropolitan area is three Nevada counties: Washoe, Storey and Lyon. It has 553 manufacturing establishments, 515 of them with fewer than 100 employees — 93% of the base — employing about 27,898 people (US Census County Business Patterns, 2023). Warehousing and storage runs at about four times the national concentration and specialty trade contractors at nearly twice (BLS QCEW, 2024 annual averages).

Nearly every employer there with more than ten employees works under the same state law. NRS 618.383 requires an employer to establish a written safety program and carry it out within 90 days, with a training program in it. An employer with more than 25 employees must also have a safety committee that includes employee representatives, paid for their committee time as if doing their usual work.

Nevada's regulations then spell out what the written program must contain: who is responsible for it, how hazards are identified, analyzed and controlled, how employees are trained before they start work, how accidents are investigated and corrected, and how compliance with safety rules is enforced. Records of committee meetings and training attendance must be kept for three years.

Read side by side with ISO 45001, that list is most of the skeleton of an occupational health and safety management system. The law never names ISO 45001, and certification does not replace the state program. But a Reno company that already has a compliant written program is closer to ISO 45001 than it thinks, and one that does not is out of compliance before any customer asks.

Industry in Reno

  • The warehousing and storage base 262 establishments in NAICS 4931, employing 13,481, about 4.0 times the national concentration and 5.6% of private-sector jobs in the metro (BLS QCEW, 2024 annual averages).
  • The specialty trade contractor base 1,144 establishments in NAICS 238, employing 17,498, about 1.9 times the national concentration (BLS QCEW, 2024 annual averages).
  • The casino hotel base 15 establishments in NAICS 721120 (casino hotels), employing 10,911, about 24.6 times the national concentration (BLS QCEW, 2024 annual averages).
  • The other miscellaneous manufacturing base 35 establishments in NAICS 3399, employing 1,578, about 3.1 times the national concentration (BLS QCEW, 2024 annual averages).
  • The fabricated metal products base 111 establishments in NAICS 332, employing 2,655, about the national concentration (location quotient 1.05; BLS QCEW, 2024 annual averages).

What the Nevada program requires, item by item

The statute, NRS 618.383, sets the frame. A written program, carried out within 90 days of establishing it. A training program, with attention to areas where injuries recur. A safety committee above 25 employees, or wherever employees manufacture explosives, with employee representatives chosen by the employees where a union represents them. A program and training delivered in a language and format employees can understand. Specialized training for workers placed by a temporary employment service. Employers with ten or fewer employees are exempt, unless they manufacture explosives.

The regulation, NAC 618.540, lists the minimum contents: a statement that managers, supervisors and employees are responsible for carrying out the program; the methods used to identify, analyze and control new and existing hazards; the methods used to make sure employees are trained before they perform their duties; accident investigation procedures and the corrective actions that follow; and a method for ensuring employees comply with safety rules and work practices. Where a committee is required, the program must also say how members are selected, what the committee does and how often it meets.

Timing is set too. A business that started in Nevada after May 18, 1994 has 60 days after hiring its eleventh employee in the state to establish the program (NAC 618.538). And separately, NRS 618.375 requires every employer to assign at least one person to be in charge of occupational safety and health.

Where each requirement lands in ISO 45001

Responsibility statement maps to the leadership and roles clauses: top management accountability and assigned responsibilities, including the person NRS 618.375 says must be in charge.

Hazard identification, analysis and control is the center of ISO 45001's planning clause, and the standard adds what the regulation leaves open: a defined method, a hierarchy of controls, and a review whenever something changes.

Training before duties, in a language employees understand maps to competence, awareness and communication. Temporary-agency workers map to the standard's controls on contractors and procurement.

Accident investigation and corrective action maps to incident, nonconformity and corrective action, where ISO 45001 requires root cause and a check that the fix worked. Committee records kept three years map to documented information.

The safety committee maps to consultation and participation of workers, and here ISO 45001 asks for more: participation by non-managerial workers in identifying hazards, deciding controls and investigating incidents, not only a meeting. A committee that already meets, takes minutes and acts on findings is the strongest asset a Nevada company brings to an ISO 45001 project.

One trap: an equivalent program needs approval

NAC 618.540 allows an employer to establish an equivalent written safety program instead of the one the regulation describes, but only if the employer obtains the approval of the Administrator. An ISO 45001 manual does not become that equivalent program on its own.

The practical answer is not to replace the state program but to make it visible inside the management system. Keep a short cross-reference that shows a Nevada OSHA inspector, in the regulation's own order, where each required element lives in your ISO 45001 documentation. The inspector reads the state list; the certification auditor reads the standard; both find what they need in the same system.

Count employees carefully. The statute does not define how temporary or seasonal workers count toward the ten-employee exemption or the 25-employee committee threshold. A distribution center that crosses 25 during a peak season should settle the question with the Division in writing rather than assume.

Who regulates which workplace

Nevada runs an OSHA-approved State Plan, administered by Nevada OSHA within the Division of Industrial Relations, covering private-sector workplaces and state and local government employers. Federal OSHA keeps federal government employers, contractors on land under exclusive federal jurisdiction, private-sector work on military facilities, employment on Indian land and maritime employment, among other listed exclusions.

For a Reno-area company with all its sites in Washoe, Storey or Lyon County, the compliance obligations register in an ISO 45001 system starts with Nevada OSHA and the state program. A company that also runs sites across the state line in California should carry that state's requirements in the register separately; our Los Angeles page covers them.

The same register discipline carries over to other standards. A warehouse or manufacturer that later adds ISO 14001 or ISO 9001 builds them into the same documentation, audit program and management review, which is where a combined system saves effort.

How we work with companies here

We work with Reno companies on site and remotely, and we put the on-site days where being in the building changes the outcome: the hazard walkthrough, a safety committee meeting, the first internal audit cycle and the certification audits.

The most useful first meeting here is usually a reading exercise: your current written safety program set against NAC 618.540, your committee minutes and training records against NAC 618.542, and the employee counts at each site. That settles what the state already requires of you before anyone prices an ISO 45001 system.

The consultant who scopes the engagement does the work. No handoff to a junior implementer after the sale.

100% certification success. Every client we have taken to a Stage 2 certification audit has been certified, with no major nonconformities. 100% of surveyed clients would recommend us. Every client who answered our client satisfaction survey said they would recommend Glocal Insight.

ISO standards we help Reno companies with

This page focuses on ISO 45001, and we can help Reno companies with any of the standards below. If you are deciding whether to bring in outside help, start with what an ISO consultant does, how fees work and when certification is worth it.

ISO 45001 in Reno

The Reno metro has 553 manufacturing establishments (US Census County Business Patterns, 2023) and 1,704 construction establishments (BLS QCEW, 2024 annual averages). ISO 45001 turns a safety program into a management system, with hazard identification, worker participation and incident follow-up that a customer, general contractor or insurer can check.

The focus of this page. ISO 45001 consultants →

ISO 9001 in Reno

The Reno metro has 553 manufacturing establishments, 515 of them with fewer than 100 employees (US Census County Business Patterns, 2023), and 642 durable-goods wholesalers (BLS QCEW, 2024 annual averages). ISO 9001 is the most widely held ISO management system certification and the base that AS9100, ISO 13485 and the other sector standards build on.

ISO 9001 consultants → · Free ISO 9001:2026 gap analysis checklist · Free ISO 9001 internal audit checklist

ISO 14001 in Reno

The Reno metro has 94 establishments in chemical, plastics and rubber, paper, primary metal, and metal coating and finishing manufacturing (BLS QCEW, 2024 annual averages), the industries where air, water and waste obligations tend to be heaviest. ISO 14001 gives a site one system for its permits, its environmental aspects and its customers' sustainability questionnaires.

ISO 14001 consultants → · Free ISO 14001:2026 gap analysis checklist · Free ISO 14001 internal audit checklist

AS9100 in Reno

The Reno metro has 3 aerospace product and parts establishments and 23 machine shops (BLS QCEW, 2024 annual averages). AS9100 adds aerospace requirements to ISO 9001, and it reaches machine shops and processors through the purchase orders of the aerospace companies they supply; distributors use AS9120.

AS9100 consultants → · Free AS9100 internal audit checklist

ISO 27001 in Reno

The Reno metro has 971 computer systems design, software publishing and hosting establishments (BLS QCEW, 2024 annual averages). ISO 27001 is the internationally recognized certification for an information security management system, and a common answer to enterprise customers' security questionnaires.

ISO 27001 consultants → · Free ISO 27001 internal audit checklist · ISO 27001 audit days calculator

ISO 42001 in Reno

The Reno metro has 625 software publishers and custom programming firms (BLS QCEW, 2024 annual averages). ISO/IEC 42001 is the management system standard for organizations that develop or use AI, and it fits alongside an existing ISO 27001 system. See which state AI laws reference it.

ISO 42001 consultants →

ISO 13485 in Reno

The Reno metro has 24 medical equipment and electromedical device manufacturing establishments (BLS QCEW, 2024 annual averages). ISO 13485 is the quality management standard for medical devices, and since February 2, 2026 the FDA's Quality Management System Regulation incorporates it by reference.

ISO 13485 consultants → · Free ISO 13485 internal audit checklist · ISO 13485 audit days calculator

ISO 17025 in Reno

The Reno metro has 31 testing laboratories (BLS QCEW, 2024 annual averages). ISO/IEC 17025 is the accreditation standard for testing and calibration laboratories, including in-house labs whose results customers or regulators rely on.

ISO 17025 consultants →

What an engagement covers

  • Nevada written program check Your written safety program read against NRS 618.383 and NAC 618.540, element by element, with gaps listed before anything else is built.
  • ISO 45001 system built on the state program An occupational health and safety management system that keeps the state program intact and visible. See ISO 45001.
  • Safety committee that does real work Selection, duties and meeting rhythm documented as the regulation asks, then extended into the worker participation ISO 45001 requires.
  • Three-year records, kept once Committee issues, attendance and training records retained to the state's three-year rule inside one document control system.
  • Temporary and seasonal workforce controls Site-specific training for agency workers and a written position on how peak-season headcount counts toward state thresholds.
  • Gap analysis and roadmap Two to four weeks, fixed scope and price, with a clear go or no-go before real money is committed.
  • Internal audit and management review Auditor-grade internal audits and a facilitated management review that produces recorded decisions.

Questions we get from companies in this market

Does Nevada require a written safety program?

Yes, for most employers. NRS 618.383 requires an employer to establish a written safety program, including a training program, and carry it out within 90 days. Employers with ten or fewer employees are exempt unless they manufacture explosives. NAC 618.540 sets the minimum contents, and NAC 618.538 gives a business that started after May 18, 1994 sixty days after hiring its eleventh Nevada employee to establish the program.

When does a Nevada employer need a safety committee?

When it has more than 25 employees, or employees who manufacture explosives (NRS 618.383). The committee must include employee representatives, who are paid for committee work as if doing their usual jobs. The written program must state how members are selected, the committee's purpose and duties, and how often it meets, and records of issues discussed and attendance must be kept for three years.

Does ISO 45001 certification satisfy Nevada's safety program law?

Not by itself. Neither the statute nor the regulation mentions ISO 45001, and NAC 618.540 allows an equivalent program only with the Administrator's approval. A well-built ISO 45001 system can contain every element the state requires, but it should show them plainly, ideally with a cross-reference in the regulation's own order, so an inspector does not have to translate.

Is the Reno area under Nevada OSHA or federal OSHA?

Mostly Nevada OSHA. Nevada's State Plan covers private-sector workplaces and state and local government employers. Federal OSHA keeps federal government employers, contractors on land under exclusive federal jurisdiction, private-sector work on military facilities, and employment on Indian land, so check where each of your sites sits.

How many manufacturers are in the Reno metro?

On the federal metropolitan definition, 553 manufacturing establishments, 515 of them with fewer than 100 employees, employing about 27,898 people (US Census County Business Patterns, 2023). That definition covers Washoe, Storey and Lyon counties. Carson City and Douglas and Churchill counties belong to the wider combined statistical area, not the metro, so figures that include them describe a larger market.

What will ISO 45001 certification cost?

Audit days are set from the number of people within your certification scope against a published table, then adjusted for factors such as hazard level, system maturity and the number of sites. For a warehouse with a large seasonal workforce, how headcount is counted in scope matters, so settle it early. Our certification cost breakdown explains how audit days are set.