Skip to content

San Diego, California

ISO consultants for San Diego device and life sciences companies.

FDA's device rule now incorporates ISO 13485:2016. California licenses your place of business separately, and the ISO route on the state's application still names the 2003 edition.

ISO certification consulting in San Diego at a glance

Who we are
Glocal Insight: senior ISO management system consultants working with San Diego companies on site and remotely. The consultant who scopes the work does the work.
Standards
ISO 9001, AS9100, ISO 14001, ISO 45001, ISO 27001, ISO 42001, ISO 13485, ISO 17025, plus internal audits, auditor training and ISO certification maintenance.
Typical timeline
For ISO 9001 at a company of 10 to 100 people, about three to four months from kickoff to the Stage 2 audit. Week by week.
Cost
A standalone gap analysis is typically in the low five figures; full implementation depends on scope. Certification body fees are separate. How certification costs are set, or estimate your audit days.
Track record
100% certification success. 100% of surveyed clients would recommend us.
Contact
(816) 535-0738 or start a conversation.

The license on top of the federal rule

San Diego has 2,929 manufacturing establishments, 2,746 of them with fewer than 100 employees, employing about 102,800 people (US Census County Business Patterns, 2023, San Diego-Chula Vista-Carlsbad metropolitan area: San Diego County). FDA's registration database lists roughly 280 registered medical device establishments in the county, about 175 of them listing a manufacturing activity (openFDA, October 2026 refresh).

The federal side of device quality changed on February 2, 2026, when FDA's Quality Management System Regulation took effect and incorporated ISO 13485:2016 by reference into 21 CFR Part 820. We set out what that does and does not require on our Minneapolis page.

What a national page will not tell a San Diego device company is that California licenses the place of business separately. The California Department of Public Health's Food and Drug Branch issues a Medical Device Manufacturing License under Health and Safety Code section 111615, and the Branch states that it is unlawful to operate without a valid one.

The state's ISO route deserves a close reading. Health and Safety Code section 111635, and the application form that follows it, name ISO 13485:2003 — an edition ISO itself now lists as withdrawn.

Industry in San Diego

  • Dexcom, San Diego Registered with the FDA as a device manufacturer, in a state that licenses device manufacturing separately under Health and Safety Code section 111615
  • Illumina, San Diego An FDA-registered device manufacturing site in a county with about 175 registered establishments listing manufacturing
  • Tandem Diabetes Care Four San Diego FDA registrations listing device manufacturing or remanufacturing
  • Design-only device companies 88 San Diego registrations develop specifications without manufacturing on site, which puts design control at the center of the quality work
  • Ship building and repairing 31 establishments and about 8,400 employees; work on vessels afloat and inside secured military installations sits with federal OSHA, most work ashore with Cal/OSHA

How the California license works

The application is form CDPH 8596, currently revision 08/2025, with a base fee of $4,616, non-refundable. The procedure CDPH publishes says the first license issued after an inspection is valid for one year and that licenses are renewed every two years after that; the current application describes the license as valid for two years. Confirm the term for your case with the Branch.

Since January 1, 2013, under section 111635 as amended by AB 1277, the Branch will not inspect the place of business before licensing it if the applicant supplies evidence of ownership and one of four kinds of documentation: a valid FDA biologics license; a valid FDA establishment registration with an officer's attestation that a federal inspection was completed within the previous two years; documentation of compliance with audits conducted under ISO standards or under 21 CFR Parts 210, 211 or 820; or an approved investigational new drug application or investigational device exemption.

Without one of those, the Branch inspects before it licenses. For a company planning a launch date, that is the difference between a document review and a site visit on the critical path.

The edition on the form

The ISO route on the current application reads: documentation of compliance with audits conducted pursuant to “ISO standards (ISO 9000 series, ISO 13485:2003, ISO 15378:2006)”. ISO lists ISO 13485:2003 as withdrawn. The current edition is ISO 13485:2016, confirmed by ISO in 2025, and it is the edition the federal regulation now incorporates.

So a San Diego manufacturer can be inspected by FDA against a 2016 text while holding a state license whose ISO route names a 2003 one. Whether the Branch accepts a 2016 audit report under that criterion is a question for the Branch. Get its answer in writing and keep it in your license file, because it decides whether your audit program can carry your renewal.

Two details in the wording matter as much as the edition. The criterion asks for documentation of compliance with audits, not for a certificate. And the FDA route requires a federal inspection within the past two years, which a company that has registered but not yet been inspected cannot attest to. For an early-stage company that has not been inspected, the routes left are an approved investigational device exemption or the audit route, and for many of them the audit route is the practical one.

Building one system for three readers

A San Diego device company's quality system is read by FDA under Part 820, by the Branch at licensing and renewal, and by a certification body if you hold an ISO 13485 certificate. Those are three audiences with overlapping and not identical demands.

The efficient approach is to build to ISO 13485:2016 and the Part 820 additions once, then plan your internal and external audit cycle so that its reports arrive in time, and in the form, that your license renewal needs. The audit program becomes the evidence for both regulators rather than a separate exercise for each.

San Diego's device base, counted

The FDA registrations here include Dexcom, Illumina and Hologic in San Diego, and four registrations for Tandem Diabetes Care, all listing device manufacturing. A large share of the base is design work: 88 San Diego registrations list developing specifications without manufacturing at that facility, and 75 are complaint-file establishments. Design control and complaint handling are where much of the quality work in this county sits.

Beyond devices, the Census table counts 31 ship building and repairing establishments with about 8,400 employees. That industry carries a safety-regulation split worth knowing: OSHA's description of California's State Plan excludes shipbuilding and ship repair on vessels afloat, and private-sector work inside secured military installations, both of which stay with federal OSHA; most other work ashore falls under Cal/OSHA. An ISO 45001 legal register for a yard has to carry both. Cal/OSHA's written Injury and Illness Prevention Program requirement applies to every California employer; we set out how it maps to ISO 45001 on our Los Angeles page.

How we work with companies here

We work with San Diego companies on site and remotely, and we put the on-site days at the points where being in the building changes the outcome — the gap analysis walkthrough, the first internal audit cycle, and the certification audits.

For device work the on-site portion concentrates on design history, production and process controls and complaint records, because those are assessed by following a record through the building rather than by reading a procedure about it.

The consultant who scopes the engagement does the work. No handoff to a junior implementer after the sale.

100% certification success. Every client we have taken to a Stage 2 certification audit has been certified, with no major nonconformities. 100% of surveyed clients would recommend us. Every client who answered our client satisfaction survey said they would recommend Glocal Insight.

ISO standards we help San Diego companies with

This page focuses on ISO 13485, and we can help San Diego companies with any of the standards below. If you are deciding whether to bring in outside help, start with what an ISO consultant does, how fees work and when certification is worth it.

ISO 13485 in San Diego

The San Diego metro has 207 medical equipment and electromedical device manufacturing establishments (BLS QCEW, 2024 annual averages). Medical equipment and supplies employment here runs about 1.9 times its national share. ISO 13485 is the quality management standard for medical devices, and since February 2, 2026 the FDA's Quality Management System Regulation incorporates it by reference.

The focus of this page. ISO 13485 consultants → · Free ISO 13485 internal audit checklist · ISO 13485 audit days calculator

ISO 9001 in San Diego

Navy ship repair in San Diego runs on a NAVSEA standard item that builds the contractor's quality system on ISO 9001, then states that a registrar certificate is not required. The San Diego metro has 2,929 manufacturing establishments, 2,746 of them with fewer than 100 employees (US Census County Business Patterns, 2023), and 2,314 durable-goods wholesalers (BLS QCEW, 2024 annual averages). ISO 9001 is the most widely held ISO management system certification and the base that AS9100, ISO 13485 and the other sector standards build on.

ISO 9001 in San Diego: the full page → · Free ISO 9001:2026 gap analysis checklist · Free ISO 9001 internal audit checklist

ISO 45001 in San Diego

The San Diego metro has 2,929 manufacturing establishments (US Census County Business Patterns, 2023) and 8,865 construction establishments (BLS QCEW, 2024 annual averages). ISO 45001 turns a safety program into a management system, with hazard identification, worker participation and incident follow-up that a customer, general contractor or insurer can check.

ISO 45001 consultants →

ISO 14001 in San Diego

The San Diego metro has 419 establishments in chemical, plastics and rubber, paper, primary metal, and metal coating and finishing manufacturing (BLS QCEW, 2024 annual averages), the industries where air, water and waste obligations tend to be heaviest. ISO 14001 gives a site one system for its permits, its environmental aspects and its customers' sustainability questionnaires.

ISO 14001 consultants → · Free ISO 14001:2026 gap analysis checklist · Free ISO 14001 internal audit checklist

AS9100 in San Diego

The San Diego metro has 109 aerospace product and parts establishments and 176 machine shops (BLS QCEW, 2024 annual averages). Aerospace employment here runs about 2.3 times its national share. AS9100 adds aerospace requirements to ISO 9001, and it reaches machine shops and processors through the purchase orders of the aerospace companies they supply; distributors use AS9120.

AS9100 consultants → · Free AS9100 internal audit checklist

ISO 27001 in San Diego

The San Diego metro has 3,099 computer systems design, software publishing and hosting establishments (BLS QCEW, 2024 annual averages). ISO 27001 is the internationally recognized certification for an information security management system, and a common answer to enterprise customers' security questionnaires.

ISO 27001 consultants → · Free ISO 27001 internal audit checklist · ISO 27001 audit days calculator

ISO 42001 in San Diego

The San Diego metro has 1,626 software publishers and custom programming firms (BLS QCEW, 2024 annual averages). ISO/IEC 42001 is the management system standard for organizations that develop or use AI, and it fits alongside an existing ISO 27001 system. See which state AI laws reference it.

ISO 42001 consultants →

ISO 17025 in San Diego

The San Diego metro has 112 testing laboratories (BLS QCEW, 2024 annual averages). ISO/IEC 17025 is the accreditation standard for testing and calibration laboratories, including in-house labs whose results customers or regulators rely on.

ISO 17025 consultants →

What an engagement covers

  • California license readiness Your documentation route for the CDPH Medical Device Manufacturing License chosen deliberately, with the audit evidence the Branch's criteria call for.
  • ISO 13485 system build A device quality system built to ISO 13485:2016 and the Part 820 additions, around your device classes and processes. See ISO 13485.
  • Audit program that serves two regulators Internal and external audits scheduled and reported so the same evidence supports FDA inspection readiness and state license renewal. See internal audits.
  • Design control for specification developers Design and development records for companies that design devices and contract out manufacturing — a large share of San Diego's registrations.
  • ISO 9001 and ISO 45001 Quality and safety systems for the wider manufacturing base, including legal registers that reflect Cal/OSHA and, on vessels afloat, federal OSHA. See ISO 9001.
  • Gap analysis and roadmap Two to four weeks, fixed scope and price, with a clear go or no-go before real money is committed.

Questions we get from companies in this market

We are registered with FDA. Do we still need a California device manufacturing license?

Yes. The California Department of Public Health's Food and Drug Branch licenses device manufacturers under Health and Safety Code section 111615, separately from FDA registration. FDA registration matters to the license in one specific way: with an officer's attestation that a federal inspection was completed within the previous two years, it is one of the documentation routes that lets the Branch license you without inspecting first.

Can our ISO 13485 audits replace the state's pre-license inspection?

They can be one of the documentation routes, and the wording deserves care. The current application, revision 08/2025, accepts documentation of compliance with audits conducted under ISO standards, and the list it gives names ISO 13485:2003, an edition ISO lists as withdrawn. The current edition is ISO 13485:2016. Ask the Branch whether a 2016 audit report satisfies the criterion and keep its answer in writing.

How much does the California license cost?

The current application form gives a base fee of $4,616, due with the application and non-refundable, with a $10 late fee for an application more than thirty days past the license expiration date. The application describes the license as valid for two years; CDPH's procedure document says a first license issued after an inspection runs one year, so confirm the term with the Branch.

We have not had an FDA inspection yet. Which route do we use?

The FDA route requires an attestation that a federal inspection was completed within the previous two years, so a company that has not yet been inspected cannot use it. The remaining documentation routes are a biologics license, an approved investigational application, or documentation of compliance with audits under ISO standards or the federal device and drug regulations. Otherwise the Branch inspects before licensing. For a young company the audit route is usually the practical one, which makes the timing of your first audits a launch-planning question.

Does the FDA now require ISO 13485 certification?

Since February 2, 2026, FDA's Quality Management System Regulation has incorporated ISO 13485:2016 by reference into 21 CFR Part 820, so conformance to the standard's requirements is part of federal law. Whether you also hold a certificate is a separate, commercial decision. Our Minneapolis page sets out the detail, including the sections Part 820 keeps on top of the standard.

What will ISO 13485 certification cost?

For ISO 13485, audit days come from a published table based on the number of people in scope, then adjusted for factors such as design responsibility and the number of sites. Our certification cost breakdown explains how audit days are set, so you can check any quote you receive.