Baltimore, Maryland
ISO consultants for Baltimore employers under MOSH.
Maryland has enforced a heat standard since September 2024 that federal OSHA has only proposed. It reaches plant floors as well as outdoor crews, and it belongs in your ISO 45001 system.
ISO certification consulting in Baltimore at a glance
- Who we are
- Glocal Insight: senior ISO management system consultants working with Baltimore companies on site and remotely. The consultant who scopes the work does the work.
- Standards
- ISO 9001, AS9100, ISO 14001, ISO 45001, ISO 27001, ISO 42001, ISO 13485, ISO 17025, plus internal audits, auditor training and ISO certification maintenance.
- Typical timeline
- For ISO 9001 at a company of 10 to 100 people, about three to four months from kickoff to the Stage 2 audit. Week by week.
- Cost
- A standalone gap analysis is typically in the low five figures; full implementation depends on scope. Certification body fees are separate. How certification costs are set, or estimate your audit days.
- Track record
- 100% certification success. 100% of surveyed clients would recommend us.
- Contact
- (816) 535-0738 or start a conversation.
A state rule federal OSHA has not finalized
The Baltimore metro has 1,439 manufacturing establishments, 1,328 of them with fewer than 100 employees, employing about 60,060 people across Baltimore city and six Maryland counties (US Census County Business Patterns, 2023, Baltimore-Columbia-Towson MSA).
Every one of them is in Maryland, and Maryland runs its own OSHA-approved State Plan, Maryland Occupational Safety and Health, covering most private-sector workers and all state and local government workers.
MOSH has done something federal OSHA has not yet done: it has a heat standard in force. Since September 30, 2024, Maryland employers whose workers are exposed to a heat index of 80°F or higher, indoors or outdoors, have had to keep a written heat-related illness prevention and management plan. Federal OSHA's heat rule is still a proposal.
That is a specific, written, auditable legal requirement, and it is exactly the kind of obligation an ISO 45001 system exists to hold. In Baltimore an ISO 45001 compliance obligations register needs it on the first page.
Industry in Baltimore
- Maryland Occupational Safety and Health OSHA-approved State Plan covering most private-sector workers; its heat stress standards, COMAR 09.12.32, took effect September 30, 2024
- Tradepoint Atlantic, Sparrows Point Broke ground May 1, 2026 on a 168-acre container terminal and on-dock rail facility backed by about $1.2 billion in private finance
- Northrop Grumman, Baltimore Radar, electronic warfare and sensor work, including G/ATOR and radar for the F-35
- Aberdeen Proving Ground More than 90 units and tenant activities, including Army research, test and evaluation commands and the 20th CBRNE Command
- Johns Hopkins Applied Physics Laboratory Main campus in Howard County, inside this metro
What Maryland's Heat Stress Standards require
The standards are COMAR 09.12.32. They apply where employees are exposed to a heat index of 80°F or higher in their work area, indoors or outdoors. Three exemptions: emergency operations and essential services that protect life or property; incidental exposure, where the work is not required for more than 15 consecutive minutes in an hour; and buildings, structures and vehicles whose mechanical ventilation keeps the heat index below 80°F.
Within scope, an employer must develop, implement and maintain a written heat-related illness prevention and management plan, available to employees and to MOSH on request. It must monitor the heat index through the shift. It must give new employees, and employees returning after seven or more consecutive days away, up to 14 days of acclimatization, and watch them while they acclimatize. It must provide free drinking water, at least 32 ounces per employee per hour, and shade as close to the work as practicable.
At a heat index of 90°F or higher, high-heat procedures apply: a rest period of at least 10 minutes every two hours between 90°F and 100°F, and 15 minutes every hour above 100°F, unless documented alternative measures give effective protection. The plan must cover emergency response, and training is required before first exposure, every year, and after any heat-related illness at the worksite, in a language employees understand. Training records are kept for one year.
We found no employee-count threshold in the regulation's text. MOSH publishes a template written plan to help employers comply.
Why it lands on plant floors, not just outdoor crews
The indoor exemption is narrow. It covers work areas where a mechanical ventilation system or fan keeps the heat index below 80°F. A building with fans that move air but do not hold the heat index under 80°F on a summer afternoon is in scope.
The standard also decides how you find out. In buildings and structures without that mechanical ventilation, employers must take direct measurements of temperature and humidity; a weather-service reading for the area is not enough. For a manufacturer, that turns heat from a seasonal reminder into a monitoring program, with readings, a method and a record.
Federal OSHA's own heat rule shows how far ahead Maryland is. It was proposed on August 30, 2024, went through an informal hearing from June 16 to July 2, 2025, and closed its post-hearing comment period on October 30, 2025. No final rule has been issued.
Where the plan sits in an ISO 45001 system
Built properly, the heat plan is not a binder that comes out in June. Each of its requirements has a home in ISO 45001: the regulation itself in the register of legal requirements; heat exposure in hazard identification and risk assessment; water, shade, rest and acclimatization as operational controls; heat index readings as monitoring and measurement; the emergency procedures in emergency preparedness and response; and training before exposure, annually and after incidents as competence, with the one-year training records as documented information.
Placed there, the plan gets an owner, an internal audit, and a line in the management review: was the heat index monitored as written, did acclimatization happen for every new starter, and what did the incidents say? That is the difference between having a plan and being able to show it works when MOSH asks for it.
Contractors are part of the same question. Where your site brings in contractors for outdoor or hot work, ISO 45001's requirements for coordinating with contractors are the place to settle who monitors and who provides water, shade and rest.
Construction at scale, and the rest of the metro
On May 1, 2026, Tradepoint Atlantic broke ground on the Sparrows Point Container Terminal, a container terminal and on-dock rail facility on 168 acres at Coke Point, on the former Bethlehem Steel site, backed by about $1.2 billion in private finance. A build of that size brings outdoor work and contractor coordination at scale, which puts it squarely in ISO 45001 territory.
The metro's technical base leans toward defense electronics and federal laboratories. Northrop Grumman's Baltimore operation works on radar, electronic warfare and sensors, including G/ATOR and radar for the F-35. Aberdeen Proving Ground hosts more than 90 units and tenant activities, among them Army research, test and evaluation commands and the 20th CBRNE Command. In 2022 the Army reported that a mobile laboratory of that command had earned ISO 17025 accreditation for air monitoring. Where AS9100 or ISO/IEC 17025 flows from work like this to local suppliers and laboratories, that is work we support.
Laboratories are accredited to ISO/IEC 17025, not certified, and accreditation covers a defined list of methods. That distinction decides how a laboratory project is scoped.
Across the metro line, the Washington metro's Maryland counties are under the same State Plan and the same heat standard; our Washington, DC page covers the Virginia and District side.
How we work with companies here
We work with Baltimore companies on site and remotely, and we put the on-site days where being in the building changes the outcome — the hazard walkthrough, heat-index measurement points on the floor, the first internal audit cycle, and the certification audits.
For most Maryland employers with hot work areas, the first conversation is about two documents: the heat plan you have, or the one the 2024 standard calls for, and the injury and incident records behind it. Between them they show where the system needs to start.
The consultant who scopes the engagement does the work. No handoff to a junior implementer after the sale.
100% certification success. Every client we have taken to a Stage 2 certification audit has been certified, with no major nonconformities. 100% of surveyed clients would recommend us. Every client who answered our client satisfaction survey said they would recommend Glocal Insight.
ISO standards we help Baltimore companies with
This page focuses on ISO 45001, and we can help Baltimore companies with any of the standards below. If you are deciding whether to bring in outside help, start with what an ISO consultant does, how fees work and when certification is worth it.
ISO 45001 in Baltimore
The Baltimore metro has 1,439 manufacturing establishments (US Census County Business Patterns, 2023) and 6,971 construction establishments (BLS QCEW, 2024 annual averages). ISO 45001 turns a safety program into a management system, with hazard identification, worker participation and incident follow-up that a customer, general contractor or insurer can check.
The focus of this page. ISO 45001 consultants →
ISO 9001 in Baltimore
In the Baltimore metro, computer systems design, engineering and research firms employ more people than all of private manufacturing. For those firms, ISO 9001 is built around a service, not a product line. The Baltimore metro has 1,439 manufacturing establishments, 1,328 of them with fewer than 100 employees (US Census County Business Patterns, 2023), and 1,692 durable-goods wholesalers (BLS QCEW, 2024 annual averages). ISO 9001 is the most widely held ISO management system certification and the base that AS9100, ISO 13485 and the other sector standards build on.
ISO 9001 in Baltimore: the full page → · Free ISO 9001:2026 gap analysis checklist · Free ISO 9001 internal audit checklist
ISO 27001 in Baltimore
Maryland's Online Data Privacy Act limits collection to what is reasonably necessary and proportionate, one of the strictest tests in any state privacy law, and requires reasonable security for what you keep. The Baltimore metro has 4,037 computer systems design, software publishing and hosting establishments (BLS QCEW, 2024 annual averages). ISO 27001 is the internationally recognized certification for an information security management system, and a common answer to enterprise customers' security questionnaires.
ISO 27001 in Baltimore: the full page → · Free ISO 27001 internal audit checklist · ISO 27001 audit days calculator
ISO 14001 in Baltimore
The Baltimore metro has 240 establishments in chemical, plastics and rubber, paper, primary metal, and metal coating and finishing manufacturing (BLS QCEW, 2024 annual averages), the industries where air, water and waste obligations tend to be heaviest. ISO 14001 gives a site one system for its permits, its environmental aspects and its customers' sustainability questionnaires.
ISO 14001 consultants → · Free ISO 14001:2026 gap analysis checklist · Free ISO 14001 internal audit checklist
ISO 17025 in Baltimore
The Baltimore metro has 79 testing laboratories (BLS QCEW, 2024 annual averages). ISO/IEC 17025 is the accreditation standard for testing and calibration laboratories, including in-house labs whose results customers or regulators rely on.
AS9100 in Baltimore
The Baltimore metro has 16 aerospace product and parts establishments and 73 machine shops (BLS QCEW, 2024 annual averages). AS9100 adds aerospace requirements to ISO 9001, and it reaches machine shops and processors through the purchase orders of the aerospace companies they supply; distributors use AS9120.
ISO 42001 in Baltimore
The Baltimore metro has 1,546 software publishers and custom programming firms (BLS QCEW, 2024 annual averages). ISO/IEC 42001 is the management system standard for organizations that develop or use AI, and it fits alongside an existing ISO 27001 system. See which state AI laws reference it.
ISO 13485 in Baltimore
The Baltimore metro has 93 medical equipment and electromedical device manufacturing establishments (BLS QCEW, 2024 annual averages). ISO 13485 is the quality management standard for medical devices, and since February 2, 2026 the FDA's Quality Management System Regulation incorporates it by reference.
ISO 13485 consultants → · Free ISO 13485 internal audit checklist · ISO 13485 audit days calculator
What an engagement covers
- Maryland compliance obligations register MOSH requirements, including COMAR 09.12.32, entered as legal requirements with owners, evaluation of compliance and review dates.
- Written heat-illness plan and monitoring method A plan that meets the Maryland standard, with measurement points, acclimatization schedules and training records built into the management system rather than beside it.
- ISO 45001 system build An occupational health and safety management system designed around your processes, contractors and Maryland's rules. See ISO 45001.
- ISO 9001 and ISO 14001 alongside Quality and environmental systems sharing the same structure, internal audits and management review. See ISO 9001 and ISO 14001.
- ISO/IEC 17025 for laboratories Scope-first accreditation preparation for testing and calibration laboratories. See ISO/IEC 17025.
- Gap analysis and roadmap Two to four weeks, fixed scope and price, with a clear go or no-go before real money is committed.
- Internal audit and management review Auditor-grade internal audits and a facilitated management review that produces recorded decisions.
Questions we get from companies in this market
Does Maryland have its own OSHA program?
Yes. Maryland Occupational Safety and Health, MOSH, is an OSHA-approved State Plan covering most private-sector workers and all state and local government workers. For most private employers and all state and local government employers in Baltimore, the occupational safety regulator is MOSH, and MOSH has rules of its own, the heat stress standards among them.
Does Maryland's heat standard apply to indoor workplaces?
Yes. COMAR 09.12.32 applies to indoor and outdoor workplaces where employees are exposed to a heat index of 80°F or higher. The indoor exemption covers work areas where mechanical ventilation keeps the heat index below 80°F, and in buildings without that ventilation the employer must measure temperature and humidity directly. A plant floor that rises above 80°F heat index is in scope.
Is there a size threshold for the written heat plan?
We found no employee-count threshold in the regulation's text. The written heat-related illness prevention and management plan is required of employers within the standard's scope, which is set by exposure to a heat index of 80°F or higher, subject to three exemptions: emergency operations and essential services, incidental exposure of no more than 15 consecutive minutes in an hour, and work areas kept below 80°F heat index by mechanical ventilation.
Does federal OSHA have a heat standard?
Not yet. Federal OSHA proposed a heat injury and illness prevention rule on August 30, 2024, held an informal public hearing from June 16 to July 2, 2025, and closed the post-hearing comment period on October 30, 2025. No final rule has been issued. In Maryland the question is settled: the state standard has been in force since September 30, 2024.
Will ISO 45001 certification show MOSH that we comply?
Certification is not a compliance finding. What an ISO 45001 system gives you is the evidence: the regulation recorded as a legal requirement, a monitoring record, training records, internal audits that test the plan, and management review decisions. When MOSH asks for the plan, you can show both the plan and that it is followed.
Do you support ISO/IEC 17025 for laboratories around Aberdeen?
Yes. Laboratories are accredited to ISO/IEC 17025 rather than certified, and accreditation covers a defined scope of methods, so the scope document is the first and most consequential decision. We prepare laboratories for accreditation assessment; the accreditation itself is granted by an accreditation body such as ANAB or A2LA.