Philadelphia, Pennsylvania
ISO consultants for Philadelphia's four-state metro.
Eleven counties, four states and three different answers to which safety law applies. For a multi-site employer here, that map comes before anything else.
ISO certification consulting in Philadelphia at a glance
- Who we are
- Glocal Insight: senior ISO management system consultants working with Philadelphia companies on site and remotely. The consultant who scopes the work does the work.
- Standards
- ISO 9001, AS9100, ISO 14001, ISO 45001, ISO 27001, ISO 42001, ISO 13485, ISO 17025, plus internal audits, auditor training and ISO certification maintenance.
- Typical timeline
- For ISO 9001 at a company of 10 to 100 people, about three to four months from kickoff to the Stage 2 audit. Week by week.
- Cost
- A standalone gap analysis is typically in the low five figures; full implementation depends on scope. Certification body fees are separate. How certification costs are set, or estimate your audit days.
- Track record
- 100% certification success. 100% of surveyed clients would recommend us.
- Contact
- (816) 535-0738 or start a conversation.
Four states, four safety arrangements
The Philadelphia metro has 4,708 manufacturing establishments, 4,365 of them with fewer than 100 employees, employing about 171,100 people (US Census County Business Patterns, 2023, Philadelphia-Camden-Wilmington MSA).
Those establishments sit in eleven counties across four states: 3,279 in the five Pennsylvania counties, 947 in the four New Jersey counties, 425 in New Castle County, Delaware, and 57 in Cecil County, Maryland (same source, summed by county).
Four states give three different answers to the first question an ISO 45001 system has to settle: which occupational safety law applies at this site? For a private employer, three of the four are under federal OSHA. Cecil County is not. Maryland runs its own OSHA-approved State Plan, and it has written rules federal OSHA has not.
For a public employer the map changes again, and in two of the four states federal OSHA does not reach it at all. A multi-site safety system built in this metro on one state's assumptions will be wrong somewhere. Here is the map.
Industry in Philadelphia
- Boeing, Ridley Park More than 4,000 employees in Delaware County, with the H-47 Chinook assembly line and the V-22 Osprey fuselage upgrade program
- Hanwha Philly Shipyard $5 billion investment announced August 2025: two more docks, three quays, and a target of up to 20 vessels a year from fewer than two
- W. L. Gore & Associates One published multi-site ISO 14001 certificate spanning a Newark, Delaware plant and five sites in Elkton, Maryland
- MOSH in Cecil County The metro's only county under a state plan for private employers, and so the only one under Maryland's heat stress standard
- Pennsylvania Department of Labor & Industry Certified workplace safety committees earn insured employers a 5 percent workers' compensation premium discount
The coverage map, state by state
Pennsylvania (Bucks, Chester, Delaware, Montgomery and Philadelphia counties): no OSHA-approved State Plan. Federal OSHA covers most private-sector workers. State and local government workers are not covered by federal OSHA.
New Jersey (Burlington, Camden, Gloucester and Salem counties): an OSHA-approved State Plan that covers state and local government workers only. Private-sector workers are under federal OSHA.
Delaware (New Castle County): no State Plan. Federal OSHA covers most private-sector workers, and state and local government workers are not covered by federal OSHA.
Maryland (Cecil County): an OSHA-approved State Plan covering most private-sector workers and all state and local government workers.
All four lines come from OSHA's own State Plan directory. The practical result: a private manufacturer with a plant in Bucks County, a warehouse in Gloucester County and a site in New Castle County answers to one occupational safety regulator. Add a building in Elkton and it answers to two.
What changes at the Maryland line
The clearest example is heat. Maryland's Heat Stress Standards have been in force since September 30, 2024. They apply to indoor and outdoor workplaces where employees are exposed to a heat index of 80°F or higher, and they require a written heat-related illness prevention and management plan, heat index monitoring through the shift, acclimatization for new and returning workers, water, shade, set rest periods from a heat index of 90°F, and training before first exposure.
Federal OSHA's heat rule is still a proposal. It was published on August 30, 2024, an informal hearing ran from June 16 to July 2, 2025, and the post-hearing comment period closed on October 30, 2025. No final rule has been issued.
So in this metro the same process, in a building without mechanical cooling, carries a written-plan obligation on one side of the state line and not on the other. One corporate heat procedure written to the Maryland rule is the simpler design. One written to the federal baseline falls short in Cecil County. We set out the Maryland standard in full on our Baltimore page.
Cross-state operation is ordinary here. W. L. Gore & Associates, for example, publishes a single multi-site ISO 14001 certificate whose scope includes a plant on Paper Mill Road in Newark, Delaware and five sites in Elkton, the Cecil County seat. That certificate is environmental, not occupational safety, and it is industry context. It shows the design question every multi-state employer here faces: one system, with site-specific legal obligations underneath it.
Public employers in Pennsylvania and Delaware
Federal OSHA does not cover state and local government workers, and neither Pennsylvania nor Delaware runs a State Plan. A municipal authority, county agency or school district on the Pennsylvania or Delaware side of this metro is therefore outside OSHA's jurisdiction, unlike its counterparts in the New Jersey counties or in Cecil County.
That is where a voluntary system does some of its most useful work. For a public employer with no OSHA inspector to answer to, ISO 45001 supplies the structure that regulation supplies elsewhere: hazard identification, worker consultation, incident investigation, and a management review that records its decisions. Other state laws may still apply to particular public functions, and we check those for each engagement rather than assume them away.
A Pennsylvania incentive that pays for part of the work
Pennsylvania's Department of Labor & Industry certifies workplace safety committees, and an insured employer with a certified committee receives a 5 percent discount on its workers' compensation premium, renewable each year. The committee needs at least two employer and two employee representatives, must meet monthly with a quorum, must have operated for at least six full months, and its members must complete annual training from a qualified provider covering hazard detection and incident investigation, among other topics. Self-insured employers can apply but do not receive the discount.
The program does not mention ISO 45001 or any management system. But a committee that meets those terms provides much of what ISO 45001 asks for under consultation and participation of workers. Building it once to serve both purposes costs little extra. It applies only to the Pennsylvania counties of this metro.
Where the metro's large programs are
Boeing's site at Ridley Park, in Delaware County, employs more than 4,000 people and includes the H-47 Chinook assembly line and the V-22 Osprey fuselage upgrade program. Hanwha announced a $5 billion investment in Philly Shipyard in August 2025, adding two docks and three quays with the aim of raising output from fewer than two vessels a year to as many as twenty.
A shipyard expansion of that size is first an occupational safety problem: contractors, lifting, hot work and a fast-growing workforce. Where AS9100 or ISO 9001 flows down from programs like these to the local supply base, that is work we support too.
How we work with companies here
We work with Philadelphia companies on site and remotely, and we put the on-site days where being in the building changes the outcome — the hazard walkthrough at each site, the first internal audit cycle, and the certification audits.
For a multi-state employer the first deliverable is usually a compliance obligations register built site by site, with the regulator, the applicable standards and the state-specific rules for each address. In this metro that register often settles the scope of the whole project.
The consultant who scopes the engagement does the work. No handoff to a junior implementer after the sale.
100% certification success. Every client we have taken to a Stage 2 certification audit has been certified, with no major nonconformities. 100% of surveyed clients would recommend us. Every client who answered our client satisfaction survey said they would recommend Glocal Insight.
ISO standards we help Philadelphia companies with
This page focuses on ISO 45001, and we can help Philadelphia companies with any of the standards below. If you are deciding whether to bring in outside help, start with what an ISO consultant does, how fees work and when certification is worth it.
ISO 45001 in Philadelphia
The Philadelphia metro has 4,708 manufacturing establishments (US Census County Business Patterns, 2023) and 14,554 construction establishments (BLS QCEW, 2024 annual averages). ISO 45001 turns a safety program into a management system, with hazard identification, worker participation and incident follow-up that a customer, general contractor or insurer can check.
The focus of this page. ISO 45001 consultants →
ISO 9001 in Philadelphia
DLA Troop Support, based in Philadelphia, runs supply chains for food, clothing and textiles, construction and equipment, and medical materiel. When its contracts name ISO 9001, the clause asks for compliance, and it flows down. The Philadelphia metro has 4,708 manufacturing establishments, 4,365 of them with fewer than 100 employees (US Census County Business Patterns, 2023), and 4,328 durable-goods wholesalers (BLS QCEW, 2024 annual averages). ISO 9001 is the most widely held ISO management system certification and the base that AS9100, ISO 13485 and the other sector standards build on.
ISO 9001 in Philadelphia: the full page → · Free ISO 9001:2026 gap analysis checklist · Free ISO 9001 internal audit checklist
ISO 14001 in Philadelphia
The Philadelphia metro has 863 establishments in chemical, plastics and rubber, paper, primary metal, and metal coating and finishing manufacturing (BLS QCEW, 2024 annual averages), the industries where air, water and waste obligations tend to be heaviest. ISO 14001 gives a site one system for its permits, its environmental aspects and its customers' sustainability questionnaires.
ISO 14001 consultants → · Free ISO 14001:2026 gap analysis checklist · Free ISO 14001 internal audit checklist
AS9100 in Philadelphia
The Philadelphia metro has 35 aerospace product and parts establishments and 254 machine shops (BLS QCEW, 2024 annual averages). AS9100 adds aerospace requirements to ISO 9001, and it reaches machine shops and processors through the purchase orders of the aerospace companies they supply; distributors use AS9120.
ISO 27001 in Philadelphia
The Philadelphia metro has 7,155 computer systems design, software publishing and hosting establishments (BLS QCEW, 2024 annual averages). ISO 27001 is the internationally recognized certification for an information security management system, and a common answer to enterprise customers' security questionnaires.
ISO 27001 consultants → · Free ISO 27001 internal audit checklist · ISO 27001 audit days calculator
ISO 42001 in Philadelphia
The Philadelphia metro has 3,518 software publishers and custom programming firms (BLS QCEW, 2024 annual averages). ISO/IEC 42001 is the management system standard for organizations that develop or use AI, and it fits alongside an existing ISO 27001 system. See which state AI laws reference it.
ISO 13485 in Philadelphia
The Philadelphia metro has 242 medical equipment and electromedical device manufacturing establishments (BLS QCEW, 2024 annual averages). ISO 13485 is the quality management standard for medical devices, and since February 2, 2026 the FDA's Quality Management System Regulation incorporates it by reference.
ISO 13485 consultants → · Free ISO 13485 internal audit checklist · ISO 13485 audit days calculator
ISO 17025 in Philadelphia
The Philadelphia metro has 164 testing laboratories (BLS QCEW, 2024 annual averages). ISO/IEC 17025 is the accreditation standard for testing and calibration laboratories, including in-house labs whose results customers or regulators rely on.
What an engagement covers
- Multi-state compliance obligations register Site-by-site legal requirements for Pennsylvania, New Jersey, Delaware and Maryland locations, including the Maryland rules that apply in Cecil County and nowhere else in the metro.
- ISO 45001 system build One occupational health and safety management system with site-specific controls underneath it. See ISO 45001.
- Heat-illness plan to the Maryland standard A written prevention and management plan, monitoring method and training records that meet COMAR 09.12.32, designed so one procedure can serve every site.
- Safety committee design for Pennsylvania sites A committee built to the Department of Labor & Industry's certification terms and to ISO 45001's worker participation requirements at the same time.
- ISO 9001 and AS9100 for the supply base Quality management systems for suppliers to aerospace, shipbuilding and industrial programs. See ISO 9001.
- Gap analysis and roadmap Two to four weeks, fixed scope and price, with a clear go or no-go before real money is committed.
- Internal audit and management review Auditor-grade internal audits across sites and states, and a facilitated management review that produces recorded decisions.
Questions we get from companies in this market
Does Pennsylvania have its own OSHA program?
No. Pennsylvania has no OSHA-approved State Plan, so federal OSHA covers most private-sector workers in the Pennsylvania counties of this metro. Federal OSHA does not cover state and local government workers, which means Pennsylvania public employers are outside OSHA's jurisdiction. Delaware is in the same position.
We have sites in Pennsylvania and South Jersey. Does New Jersey's state plan apply to us?
Not if you are a private employer. New Jersey's OSHA-approved State Plan covers state and local government workers only. Private-sector sites in Burlington, Camden, Gloucester and Salem counties are under federal OSHA, the same as your Pennsylvania sites. If you are a New Jersey public employer, the state plan does apply.
Does Maryland's heat standard apply to our plant in Cecil County?
If your employees are exposed to a heat index of 80°F or higher in their work area, indoors or outdoors, it applies, unless an exemption fits: brief incidental exposure, emergency operations and essential services, or a work area where mechanical ventilation keeps the heat index below 80°F. Maryland runs its own State Plan covering most private-sector workers, and its Heat Stress Standards have been in force since September 30, 2024. Your Pennsylvania, New Jersey and Delaware sites are under federal OSHA, whose heat rule is still a proposal.
Can one ISO 45001 certificate cover sites in several states?
Yes. A single management system can be certified across several sites, and that is usually the efficient design for a multi-state employer. What cannot be shared is the legal layer: each site needs its own compliance obligations, and in this metro a Cecil County site carries Maryland rules that the others do not.
Does the Pennsylvania safety committee discount require ISO 45001?
No. The Department of Labor & Industry's certified safety committee program does not mention ISO 45001 or any management system. It gives insured employers a 5 percent workers' compensation premium discount for a committee with at least two employer and two employee representatives that meets monthly, has operated for at least six months, and whose members complete annual training covering hazard detection and incident investigation. A committee built to those terms also does much of what ISO 45001 asks for in worker participation.
Is a Pennsylvania municipal authority covered by OSHA?
Not by federal OSHA. OSHA's own State Plan directory says that in Pennsylvania state and local government workers are not covered by federal OSHA, and Pennsylvania has no State Plan of its own. Other state laws may apply to particular public functions, so check those. For a public employer looking for a working safety framework without an OSHA inspector behind it, ISO 45001 is a practical structure to adopt.