Skip to content

Bend, Oregon

ISO consultants for Central Oregon manufacturers and aircraft suppliers.

An FAA production certificate comes with a quality system written into federal regulation, including control of suppliers and a process for reporting parts that leave a supplier nonconforming. It reaches Bend shops through the purchase order.

ISO certification consulting in Bend at a glance

Who we are
Glocal Insight: senior ISO management system consultants working with Bend companies on site and remotely. The consultant who scopes the work does the work.
Standards
ISO 9001, AS9100, ISO 14001, ISO 45001, ISO 27001, ISO 42001, ISO 13485, ISO 17025, plus internal audits, auditor training and ISO certification maintenance.
Typical timeline
For ISO 9001 at a company of 10 to 100 people, about three to four months from kickoff to the Stage 2 audit. Week by week.
Cost
A standalone gap analysis is typically in the low five figures; full implementation depends on scope. Certification body fees are separate. How certification costs are set, or estimate your audit days.
Track record
100% certification success. 100% of surveyed clients would recommend us.
Contact
(816) 535-0738 or start a conversation.

The federal quality system behind a Bend aircraft

Under the 2023 federal delineation, the Bend metropolitan area is three counties: Deschutes, Crook and Jefferson. It has 426 manufacturing establishments, 411 of them with fewer than 100 employees — 96% of the base — employing about 7,862 people (US Census County Business Patterns, 2023). Aircraft manufacturing accounts for 12 establishments and about 550 jobs, roughly one manufacturing job in fifteen, at about three times the national concentration (BLS QCEW, 2024 annual averages).

Bend builds certificated aircraft. Epic Aircraft received an FAA production certificate for its E1000 turboprop in July 2020, as AOPA reported at the time. In July 2025 it announced FAA type certification of the E1000 AX, and in September 2025 it said it conducts all of its engineering, manufacturing and administrative operations at its Bend headquarters.

A production certificate comes with a quality system written into federal regulation. Under 14 CFR 21.137, each applicant for or holder of a production certificate “must establish and describe in writing a quality system” with procedures for fifteen areas, from design data control to quality escapes. One of them is supplier control: procedures that ensure each supplier-provided product, article or service conforms to the holder's requirements, and a supplier-reporting process for items that leave a supplier and are later found not to conform.

The regulation binds the manufacturer, not you, and it names no quality standard. It reaches a Central Oregon machine shop, composite fabricator or harness builder through the purchase order. What the order asks for is the manufacturer's way of meeting its own federal obligation, so treat it as compliance rather than preference. A supplier with a working system meets it as a matter of routine.

Industry in Bend

  • Epic Aircraft, Bend FAA production certificate for the E1000 in July 2020; FAA type certification of the E1000 AX announced July 2025, with deliveries at its Bend factory headquarters
  • Aircraft manufacturing 12 establishments and about 552 jobs, about three times the national concentration (BLS QCEW, 2024)
  • Aerospace product and parts makers 19 establishments and about 637 jobs, about 1.6 times the national concentration (BLS QCEW, 2024)
  • FAA production approval rules 14 CFR 21.137 requires supplier control, a supplier-reporting process and five- or ten-year record retention of production approval holders
  • Oregon State Plan Covers most private-sector workers across Deschutes, Crook and Jefferson counties

What Part 21 asks of the manufacturer, and what reaches you

Section 21.137 lists the procedures a production approval holder's quality system must contain: design data control, document control, supplier control, manufacturing process control, inspecting and testing (including a flight test of each aircraft), control of inspection, measuring and test equipment, inspection and test status, nonconforming product and article control, corrective and preventive action, handling and storage, control of quality records, internal audits, in-service feedback, quality escapes and, where the holder issues them, authorized release documents.

Several of those land on suppliers, because the holder cannot meet them without you. Design data and document control reach you first: the drawing and specification revision on the order is the one you build to, and your system has to keep superseded revisions off the floor.

Supplier control. The holder must be able to show that what you deliver conforms. That can mean source inspection, first article inspection, certificates of conformance or supplier audits; the purchase order says which.

Measuring equipment. The holder's own equipment must be calibrated to standards traceable to a standard acceptable to the FAA. If your inspection data is used to accept parts, expect the same question about your gauges.

Quality records. The holder must keep records for at least five years for the products and articles made under the approval, and at least ten years for critical components identified under 14 CFR 45.15(c). If the order flows a retention period to you, check it against those two figures.

Build the escape-reporting process first

The clause most suppliers underestimate is paragraph (c)(2): the holder must have a process for its suppliers to report products, articles or services that were released and later found not to conform. Paragraph (n) then requires procedures for identifying, analyzing and initiating corrective action for products that left the holder's quality system nonconforming.

For you, that means a written route from “we found a problem with parts we already shipped” to a notice in your customer's hands: who decides, how fast, what lots are affected, and what evidence goes with it. A supplier who reports a quality escape promptly, with lot traceability, keeps the relationship. One who is found out at the customer's receiving inspection, or in service, often does not.

In an AS9100 system, that route lives in nonconforming output control and corrective action, tied to the traceability that tells you which serial numbers or lots are affected. Build it before the first aerospace order, not after the first escape.

From ISO 9001 to AS9100, and the edition question

AS9100 is the aerospace layer on top of ISO 9001. A Central Oregon shop already running ISO 9001 for industrial customers adds the aerospace requirements rather than starting again.

ISO 9001:2026 was published on September 16, 2026. Certificates to the 2015 edition stay valid until the transition ends on September 30, 2029, and from March 31, 2028 new certifications are issued only to the 2026 edition. The aerospace standard's own timing is set separately, so confirm it before you choose, and build with both ISO editions in view.

Three counties, one State Plan

The aircraft builders are part of a wider aerospace base: aerospace product and parts manufacturing counts 19 establishments and about 640 jobs in the metro, at about 1.6 times the national concentration (BLS QCEW, 2024). Any of them selling into a production approval holder's supply chain meets the same supplier-control requirements through its orders.

Oregon runs an OSHA-approved State Plan covering most private-sector workers and all state and local government workers, so most shops in the three counties answer to the state rather than federal OSHA. Federal OSHA keeps private establishments inside Indian reservation boundaries, including Warm Springs. An ISO 45001 system's compliance obligations register is built on Oregon's rules.

Our Eugene page covers a federal formaldehyde testing rule that shapes quality systems in Lane County's panel plants.

How we work with companies here

We work with Bend companies on site and remotely, and we put the on-site days where being in the building changes the outcome: the gap analysis walkthrough, the first internal audit cycle and the certification audits.

The most useful first meeting here is a reading exercise: an aerospace purchase order and the quality requirements it invokes, your current process for nonconforming product, and how you would tell a customer about parts already shipped. That settles what you are held to before anyone prices a system.

The consultant who scopes the engagement does the work. No handoff to a junior implementer after the sale.

100% certification success. Every client we have taken to a Stage 2 certification audit has been certified, with no major nonconformities. 100% of surveyed clients would recommend us. Every client who answered our client satisfaction survey said they would recommend Glocal Insight.

ISO standards we help Bend companies with

This page focuses on AS9100, and we can help Bend companies with any of the standards below. If you are deciding whether to bring in outside help, start with what an ISO consultant does, how fees work and when certification is worth it.

AS9100 in Bend

The Bend metro has 19 aerospace product and parts establishments and 14 machine shops (BLS QCEW, 2024 annual averages). Aerospace employment here runs about 1.6 times its national share. AS9100 adds aerospace requirements to ISO 9001, and it reaches machine shops and processors through the purchase orders of the aerospace companies they supply; distributors use AS9120.

The focus of this page. AS9100 consultants → · Free AS9100 internal audit checklist

ISO 9001 in Bend

The Bend metro has 426 manufacturing establishments, 411 of them with fewer than 100 employees (US Census County Business Patterns, 2023), and 271 durable-goods wholesalers (BLS QCEW, 2024 annual averages). ISO 9001 is the most widely held ISO management system certification and the base that AS9100, ISO 13485 and the other sector standards build on.

ISO 9001 consultants → · Free ISO 9001:2026 gap analysis checklist · Free ISO 9001 internal audit checklist

ISO 45001 in Bend

The Bend metro has 426 manufacturing establishments (US Census County Business Patterns, 2023) and 1,723 construction establishments (BLS QCEW, 2024 annual averages). ISO 45001 turns a safety program into a management system, with hazard identification, worker participation and incident follow-up that a customer, general contractor or insurer can check.

ISO 45001 consultants →

ISO 14001 in Bend

The Bend metro has 49 establishments in chemical, plastics and rubber, paper, primary metal, and metal coating and finishing manufacturing (BLS QCEW, 2024 annual averages), the industries where air, water and waste obligations tend to be heaviest. ISO 14001 gives a site one system for its permits, its environmental aspects and its customers' sustainability questionnaires.

ISO 14001 consultants → · Free ISO 14001:2026 gap analysis checklist · Free ISO 14001 internal audit checklist

ISO 27001 in Bend

The Bend metro has 637 computer systems design, software publishing and hosting establishments (BLS QCEW, 2024 annual averages). ISO 27001 is the internationally recognized certification for an information security management system, and a common answer to enterprise customers' security questionnaires.

ISO 27001 consultants → · Free ISO 27001 internal audit checklist · ISO 27001 audit days calculator

ISO 42001 in Bend

The Bend metro has 511 software publishers and custom programming firms (BLS QCEW, 2024 annual averages). ISO/IEC 42001 is the management system standard for organizations that develop or use AI, and it fits alongside an existing ISO 27001 system. See which state AI laws reference it.

ISO 42001 consultants →

ISO 13485 in Bend

The Bend metro has 15 medical equipment and electromedical device manufacturing establishments (BLS QCEW, 2024 annual averages). ISO 13485 is the quality management standard for medical devices, and since February 2, 2026 the FDA's Quality Management System Regulation incorporates it by reference.

ISO 13485 consultants → · Free ISO 13485 internal audit checklist · ISO 13485 audit days calculator

ISO 17025 in Bend

The Bend metro has 6 testing laboratories (BLS QCEW, 2024 annual averages). ISO/IEC 17025 is the accreditation standard for testing and calibration laboratories, including in-house labs whose results customers or regulators rely on.

ISO 17025 consultants →

What an engagement covers

  • Aerospace purchase order review We read the quality requirements in your aircraft customers' purchase orders and list what each asks for: inspection, first articles, records, calibration and escape reporting.
  • AS9100 system for Part 21 supply chains The aerospace layer on top of ISO 9001, built to produce the evidence a production approval holder needs from you. See AS9100.
  • Quality escape procedure A written route from discovery to customer notice, with lot traceability and containment, built before the first escape.
  • Records and calibration controls Retention periods matched to your orders, including ten-year periods where critical components are involved, and gauges calibrated with traceable certificates.
  • ISO 45001 under Oregon's State Plan Compliance obligations built on Oregon's rules for sites across Deschutes, Crook and Jefferson counties. See ISO 45001.
  • Gap analysis and roadmap Two to four weeks, fixed scope and price, with a clear go or no-go before real money is committed.
  • Internal audit and management review Auditor-grade internal audits and a facilitated management review that produces recorded decisions.

Questions we get from companies in this market

Does the FAA require AS9100 from suppliers to a Bend aircraft maker?

No. 14 CFR 21.137 requires the production certificate holder to have a written quality system, including procedures that ensure supplier-provided products and services conform to its requirements. It names no quality standard. Whether you need AS9100, ISO 9001 or a customer audit instead is set by the manufacturer's purchase order and supplier requirements, so read those first.

What happens if we find a problem with parts we already shipped to an aircraft manufacturer?

Your customer is required by 14 CFR 21.137(c)(2) to have a supplier-reporting process for products, articles or services released by a supplier and later found not to conform. Your purchase order or supplier requirements tell you how to use it. Report promptly, with the affected lots or serial numbers identified, and keep the evidence of what you found and when.

How long do aircraft quality records have to be kept?

Under 14 CFR 21.137(k), a production approval holder keeps quality records for at least five years for products and articles made under the approval, and at least ten years for critical components identified under 14 CFR 45.15(c). Those duties are the manufacturer's; the retention period that binds you is the one in your purchase order.

How many manufacturers are in the Bend metro?

On the federal metropolitan definition, which under the 2023 delineation covers Deschutes, Crook and Jefferson counties, 426 manufacturing establishments, 411 of them with fewer than 100 employees, employing about 7,862 people (US Census County Business Patterns, 2023).

Is a Bend manufacturer under federal OSHA?

Mostly not. Oregon runs an OSHA-approved State Plan that covers most private-sector workers and all state and local government workers, so the state is the safety regulator for most shops in the three counties. An ISO 45001 compliance obligations register should be built on Oregon's rules.

What will AS9100 certification cost a small shop?

Audit time is set mainly by the number of people in the certification scope, then adjusted for factors such as design responsibility and multiple sites. A single-site build-to-print shop sits at the small end. Our certification cost guide explains how audit days are set, and the audit days calculator gives an estimate for your headcount.