Fort Smith, Arkansas
ISO consultants for Fort Smith metro manufacturers.
Arkansas can designate a plant a Hazardous Employer and require a written safety plan within weeks. The seven components it demands are the working core of ISO 45001.
ISO certification consulting in Fort Smith at a glance
- Who we are
- Glocal Insight: senior ISO management system consultants working with Fort Smith companies on site and remotely. The consultant who scopes the work does the work.
- Standards
- ISO 9001, AS9100, ISO 14001, ISO 45001, ISO 27001, ISO 42001, ISO 13485, ISO 17025, plus internal audits, auditor training and ISO certification maintenance.
- Typical timeline
- For ISO 9001 at a company of 10 to 100 people, about three to four months from kickoff to the Stage 2 audit. Week by week.
- Cost
- A standalone gap analysis is typically in the low five figures; full implementation depends on scope. Certification body fees are separate. How certification costs are set, or estimate your audit days.
- Track record
- 100% certification success. 100% of surveyed clients would recommend us.
- Contact
- (816) 535-0738 or start a conversation.
The safety program Arkansas can require on a 30-day clock
The Fort Smith metro has 220 manufacturing establishments, 185 of them with fewer than 100 employees, employing about 18,010 people (US Census County Business Patterns, 2023). It is Crawford and Sebastian counties in Arkansas and Sequoyah County in Oklahoma, and manufacturing employment runs at 2.26 times the national concentration (BLS QCEW, 2024 annual averages).
The mix is heavy industry. Paper manufacturing runs at about six times the national rate, corrugated box making at more than seven times, primary metals at three and a half times, and truck transportation, with about 3,360 jobs, at more than three and a half times (BLS QCEW, 2024 annual averages). In heavy industry, injury rates matter, and Arkansas has a rule for plants whose rates run well above their industry's benchmark.
Under Arkansas law and Workers' Compensation Commission Rule 32, an employer whose injury rate reaches the benchmark for its industry can be designated a Hazardous Employer. It then has 30 days to obtain a safety consultation, 30 days after the consultant's report to file a written health and safety plan, six months to implement it, a progress report every 60 days, and a follow-up inspection. Failing to implement the plan can cost up to $1,000 a day.
The plan must contain seven named components. Read them side by side with ISO 45001 and they are its operational core. The rule never names ISO 45001, and a certificate does not exempt anyone. But a plant that already runs the system is not writing a safety program from scratch on a 30-day clock.
Industry in Fort Smith
- ABB Global headquarters of ABB's NEMA Motors Division; ABB calls Fort Smith its largest US manufacturing location, with about 2,500 employees.
- Rheem Headquarters of Rheem's US air conditioning business and HVAC manufacturing in Fort Smith.
- ArcBest Corporate headquarters on McClure Drive, Fort Smith.
- Gerber Baby food plant in Fort Smith, in operation since 1964.
- University of Arkansas - Fort Smith Home of new advanced manufacturing and workforce centers supported by local industry.
How an Arkansas plant ends up on the list
The arithmetic is published in the rule. Your Employer Incidence Rate is the number of incidents divided by the number of employees, times 100. Divide that by the Expected Incidence Rate, the benchmark rate for your NAICS code drawn from Bureau of Labor Statistics data, and you have your Hazard Index. “Any employer whose Hazard Index is 1.0 or greater may be identified as a Hazardous Employer.”
Two details matter. An incident here is not an OSHA recordable: it is a work injury or illness for which compensation is paid, which in Arkansas means the employee missed eight or more calendar days, or an injury causing permanent partial disability without lost time. And no employer with only one incident in a calendar year is identified.
Small plants should notice what that means. In a 25-person shop, two compensable injuries in a year give an Employer Incidence Rate of 8.0. Whether that crosses the line depends on your industry's benchmark, but the point is that a small headcount makes every serious injury count heavily in the formula.
The seven components, and where ISO 45001 already has them
Rule 32 lists what the plan must contain. Here it is beside the ISO 45001 clauses that cover the same ground:
Management: a written safety policy and health and safety responsibilities assigned by title. That is the OH&S policy and organizational roles (clauses 5.2 and 5.3). Analysis: identified operational, health and safety hazards. That is hazard identification and risk assessment (6.1.2). Record keeping: documented information (7.5).
Education and training: competence and awareness (7.2 and 7.3). Audit and inspection, with a qualified person named by title: monitoring and internal audit (9.1 and 9.2). Incident investigation, covering near-misses as well as accidents and leading to corrective measures: incident, nonconformity and corrective action (10.2). Periodic review and revision to test whether abatement worked: management review (9.3).
The consultation itself has to come from an Approved Professional Safety Source approved by the Commission's Health and Safety Division, which the rule says may be the Department of Labor, your insurance carrier, your own employee or a private consultant. That is a separate role. What a running ISO 45001 system gives you is the evidence: when the consultant reports, the plan is drawn from documents you already keep, and the six-month follow-up inspection finds a program that was working before anyone asked.
The better reason to build it is upstream of the rule. A system that investigates near-misses and reviews whether its fixes worked is the thing most likely to keep the Hazard Index under 1.0 in the first place.
One metro, two states, one federal regulator
Neither Arkansas nor Oklahoma runs an OSHA-approved State Plan, so private employers in all three counties are under federal OSHA. Arkansas's own occupational safety office covers public-sector workplaces such as schools, cities and state agencies; private employers answer to federal OSHA.
The Hazardous Employer Program is different: it belongs to Arkansas's workers' compensation system, so it reaches the Arkansas side of the metro and not a plant in Sequoyah County, which sits under Oklahoma's separate workers' compensation rules. For an employer with sites on both sides of the line, ISO 45001's legal requirements register (clause 6.1.3) is where that difference gets recorded, site by site, rather than assumed.
What Fort Smith makes
Start with ABB. Fort Smith is the global headquarters of its NEMA Motors Division, and ABB describes the site as its largest US manufacturing location, with about 2,500 employees. Rheem runs the headquarters of its US air conditioning business here, alongside HVAC manufacturing, and ArcBest has its corporate headquarters in Fort Smith.
Around them sit the paper converters, metal fabricators (about 1,340 jobs, one and a half times the national rate, BLS QCEW, 2024 annual averages), wood products makers and job shops that make up most of the 185 small manufacturers. For most of them ISO 9001 is the customer-facing credential, and ISO 14001 comes up where a paper or metals customer, or a corporate parent, asks for environmental evidence. Food plants in the area mostly run on GFSI-benchmarked food safety schemes, which is specialist work outside our scope.
Integrated systems make particular sense here. A plant that needs ISO 9001 for its customers and a defensible safety program for Arkansas can run both on one set of procedures, one internal audit program and one management review.
Free safety consultation in Arkansas
The Arkansas Department of Labor and Licensing runs the free OSHA consultation service for private employers and the SHARP recognition program.
Use what fits. Our work starts where a consultation visit ends: turning a list of findings into a management system that keeps working after the visit.
How we work with companies here
We work with Fort Smith companies on site and remotely, and we put the on-site days where being on the floor changes the outcome: the hazard walkthrough, the gap analysis, the first internal audit and the certification audits.
If your plant has already been notified under the Hazardous Employer Program, the timeline is set by the rule, so we plan backwards from your consultant's report date and the six-month follow-up inspection.
The consultant who scopes the engagement does the work. No handoff to a junior implementer after the sale.
100% certification success. Every client we have taken to a Stage 2 certification audit has been certified, with no major nonconformities. 100% of surveyed clients would recommend us. Every client who answered our client satisfaction survey said they would recommend Glocal Insight.
ISO standards we help Fort Smith companies with
This page focuses on ISO 9001, and we can help Fort Smith companies with any of the standards below. If you are deciding whether to bring in outside help, start with what an ISO consultant does, how fees work and when certification is worth it.
ISO 9001 in Fort Smith
The Fort Smith metro has 220 manufacturing establishments, 185 of them with fewer than 100 employees (US Census County Business Patterns, 2023), and 209 durable-goods wholesalers (BLS QCEW, 2024 annual averages). ISO 9001 is the most widely held ISO management system certification and the base that AS9100, ISO 13485 and the other sector standards build on.
The focus of this page. ISO 9001 consultants → · Free ISO 9001:2026 gap analysis checklist · Free ISO 9001 internal audit checklist
ISO 45001 in Fort Smith
The Fort Smith metro has 220 manufacturing establishments (US Census County Business Patterns, 2023) and 498 construction establishments (BLS QCEW, 2024 annual averages). ISO 45001 turns a safety program into a management system, with hazard identification, worker participation and incident follow-up that a customer, general contractor or insurer can check.
ISO 14001 in Fort Smith
The Fort Smith metro has 36 establishments in chemical, plastics and rubber, paper, primary metal, and metal coating and finishing manufacturing (BLS QCEW, 2024 annual averages), the industries where air, water and waste obligations tend to be heaviest. ISO 14001 gives a site one system for its permits, its environmental aspects and its customers' sustainability questionnaires.
ISO 14001 consultants → · Free ISO 14001:2026 gap analysis checklist · Free ISO 14001 internal audit checklist
AS9100 in Fort Smith
The Fort Smith metro has 1 aerospace product and parts establishment and 23 machine shops (BLS QCEW, 2024 annual averages). AS9100 adds aerospace requirements to ISO 9001, and it reaches machine shops and processors through the purchase orders of the aerospace companies they supply; distributors use AS9120.
ISO 27001 in Fort Smith
The Fort Smith metro has 66 computer systems design, software publishing and hosting establishments (BLS QCEW, 2024 annual averages). ISO 27001 is the internationally recognized certification for an information security management system, and a common answer to enterprise customers' security questionnaires.
ISO 27001 consultants → · Free ISO 27001 internal audit checklist · ISO 27001 audit days calculator
ISO 42001 in Fort Smith
The Fort Smith metro has 27 software publishers and custom programming firms (BLS QCEW, 2024 annual averages). ISO/IEC 42001 is the management system standard for organizations that develop or use AI, and it fits alongside an existing ISO 27001 system. See which state AI laws reference it.
ISO 13485 in Fort Smith
The Fort Smith metro has 5 medical equipment and electromedical device manufacturing establishments (BLS QCEW, 2024 annual averages). ISO 13485 is the quality management standard for medical devices, and since February 2, 2026 the FDA's Quality Management System Regulation incorporates it by reference.
ISO 13485 consultants → · Free ISO 13485 internal audit checklist · ISO 13485 audit days calculator
ISO 17025 in Fort Smith
The Fort Smith metro has 10 testing laboratories (BLS QCEW, 2024 annual averages). ISO/IEC 17025 is the accreditation standard for testing and calibration laboratories, including in-house labs whose results customers or regulators rely on.
What an engagement covers
- Safety program gap analysis Your current safety program measured against Rule 32's seven components and ISO 45001, so you know what is missing before anyone else tells you.
- ISO 45001 system build Hazard identification, incident investigation, training records and management review built to run, not to file. See ISO 45001.
- ISO 9001 for customer requirements A quality management system designed around your processes and your customers' audits. See ISO 9001.
- Integrated quality, safety and environment One set of procedures, one audit program and one management review for ISO 9001, 45001 and 14001.
- Two-state legal register Site-by-site legal requirements for employers with plants in Arkansas and Oklahoma.
- Internal audit and management review Auditor-grade internal audits and a facilitated management review producing recorded decisions.
Questions we get from companies in this market
What is an Arkansas Hazardous Employer?
An employer identified under Ark. Code Ann. 11-9-409 and Workers' Compensation Commission Rule 32, usually because its Hazard Index, its own compensable injury rate divided by the benchmark rate for its NAICS code, is 1.0 or greater. Employers with only one incident in a calendar year are not identified. A designated employer must obtain a safety consultation within 30 days, file a written health and safety plan, report progress every 60 days and pass a follow-up inspection. Failing to implement the plan can bring a civil penalty of up to $1,000 a day.
Does ISO 45001 certification take us off the Hazardous Employer list?
No. The rule does not mention ISO 45001, and removal comes when the Health and Safety Division determines you have complied with your plan. What ISO 45001 does is cover the same seven components the plan must contain, from a written policy and assigned responsibilities to incident investigation and periodic review, so a plant running the system can produce the plan from its own records and show it working at the six-month inspection.
Does the Arkansas program apply to our plant in Sequoyah County, Oklahoma?
No. It is part of Arkansas's workers' compensation system and applies to Arkansas employment. Sequoyah County is in the Fort Smith metro but under Oklahoma's own workers' compensation rules. Both states leave private-sector workplace safety enforcement to federal OSHA, so the OSHA side is the same in all three counties.
Does Arkansas have its own OSHA plan?
Not for private employers. Arkansas is not an OSHA-approved State Plan state. Its own occupational safety office covers public-sector workplaces such as schools, municipalities and state agencies under state law, while private employers in Fort Smith are under federal OSHA.
What counts as an incident under the Arkansas formula?
Not every OSHA recordable. Rule 32 counts a work injury or illness for which compensation is paid, which requires eight or more calendar days of missed work, plus any injury causing permanent partial disability without lost time. That is why serious injuries, not minor first-aid cases, drive the Hazard Index.
We need ISO 9001 for a customer. Should we add ISO 45001 at the same time?
In this metro it is often worth it. The two standards share a structure, so procedures, internal audits and management review can be built once. For a paper, metals or fabrication plant in Arkansas, the safety half also covers the seven components Arkansas's plan would have to contain if your plant were ever designated a Hazardous Employer.