Racine, Wisconsin
ISO consultants for Racine County manufacturers and tractor suppliers.
CNH builds Magnum tractors in Racine. Its Supplier Code strongly recommends an environmental management system to ISO 14001 or EMAS, reaches every seller of goods or services, and comes with a yearly sustainability check and a right to audit.
ISO certification consulting in Racine at a glance
- Who we are
- Glocal Insight: senior ISO management system consultants working with Racine companies on site and remotely. The consultant who scopes the work does the work.
- Standards
- ISO 9001, AS9100, ISO 14001, ISO 45001, ISO 27001, ISO 42001, ISO 13485, ISO 17025, plus internal audits, auditor training and ISO certification maintenance.
- Typical timeline
- For ISO 9001 at a company of 10 to 100 people, about three to four months from kickoff to the Stage 2 audit. Week by week.
- Cost
- A standalone gap analysis is typically in the low five figures; full implementation depends on scope. Certification body fees are separate. How certification costs are set, or estimate your audit days.
- Track record
- 100% certification success. 100% of surveyed clients would recommend us.
- Contact
- (816) 535-0738 or start a conversation.
Strongly recommended, and checked every year
The Racine-Mount Pleasant metropolitan area is a single county: Racine. Milwaukee sits in the same combined region but outside the metro; Kenosha is a separate metro inside the Chicago combined area. Racine County has 290 manufacturing establishments, 250 of them with fewer than 100 employees — 86% of the base — employing about 17,102 people (US Census County Business Patterns, 2023). Manufacturing is about one private-sector job in four here, at 2.8 times the national concentration (BLS QCEW, 2024 annual averages).
Racine builds tractors. CNH says its Case IH Magnum has been built in Racine since 1988, and the company counts some 8,000 employees across ten US manufacturing plants. A supplier to that plant, or to any CNH business, is covered by CNH’s Supplier Code of Conduct (the 2024 English edition CNH posts), which applies to everyone who sells CNH goods or services of any type.
The Code’s environment section lists five things suppliers should do, then adds one sentence: an environmental management system “according to international standards (i.e. ISO14001, EMAS), is strongly recommended.” It does not say certified, and it does not say required.
Two other parts of the program decide what a Racine supplier should do with that recommendation. CNH says it monitors adherence and reserves the right to request documentation and conduct on-site audits. And since October 2025, it asks each supplier, every year, to share a third-party sustainability rating or complete a questionnaire. An ISO 14001 system is the most direct way to have the answers on file before the request arrives.
Industry in Racine
- CNH, Racine Case IH Magnum tractors built in Racine since 1988; Supplier Code strongly recommends an ISO 14001 or EMAS environmental management system
- SC Johnson Global headquarters in Racine; Waxdale in Mount Pleasant is its largest manufacturing facility, with more than 700 people making liquid and aerosol products
- Modine Based in Racine; data center products were 35% of fiscal 2026 net sales
- Twin Disc Marine and off-highway power transmission maker that still manufactures in Racine; headquarters now in Milwaukee
- Racine County electrical equipment makers 21 establishments, about 2,270 jobs, 11 times the national concentration (BLS QCEW, 2024)
What the Code asks, word by word
The environment section says all suppliers should make every effort to optimize resource use and minimize polluting and greenhouse gas emissions. They should design products with their environmental impact and their potential for reuse and recycling in mind. They should manage waste treatment and disposal in compliance with applicable laws, avoid potentially dangerous substances as defined by law, and apply logistics policies that consider environmental impact.
Read as an auditor would, that list is most of an ISO 14001 system without the structure. Resource use and emissions are significant environmental aspects. Waste and substance rules are compliance obligations. Product design is the life cycle perspective the standard asks you to take. What the Code leaves out is how you prove any of it, and that is what an environmental management system adds: objectives, monitoring, internal audit and management review.
Health and safety is worded differently. All suppliers must provide and maintain a safe work environment in compliance with all applicable laws. That is a requirement, not a recommendation. In Wisconsin, private employers are under federal OSHA, and an ISO 45001 system keeps that obligation organized.
The yearly check and the right to audit
CNH’s supplier portal says the company assesses its supply chain every year. Under the process adopted in October 2025, each supplier is asked annually either to share an existing third-party sustainability rating or to complete a questionnaire. CNH’s former questionnaire is no longer active, so an answer prepared for it may not fit what is asked now.
A supplier sustainability questionnaire typically asks whether you have an environmental policy, measured targets, emissions and waste data, and a way to show that legal requirements are met. A supplier with a working ISO 14001 system answers from records it already keeps. A supplier without one rebuilds the answers every year.
The Code’s monitoring section adds teeth. CNH may request documentation and conduct on-site audits. Where a supplier materially breaches the Code it may require an action plan, and it reserves the right to end the relationship with a supplier unwilling or unable to come into compliance. A recommendation does not oblige you to certify. But a supplier asked to show how it controls emissions and waste is better placed with a system than without one.
Flow-down, and the rest of the Racine base
The Code makes each supplier responsible for communicating its principles to its own employees, affiliates and subcontractors. A machine shop or coater two tiers below the tractor line can receive it on a customer’s purchase order without ever selling to CNH.
CNH is one of several large requirement-setters in this county. SC Johnson keeps its global headquarters in Racine and calls its Waxdale plant in Mount Pleasant its largest manufacturing facility, with more than 700 people making liquid and aerosol products. Modine is based in Racine, and data center products were 35% of its fiscal 2026 sales. Twin Disc still manufactures in Racine, although its headquarters is now in Milwaukee.
The industry mix is unusual. Electrical equipment runs at 11 times the national concentration here, chemicals at 6 times and machinery at almost 5 (BLS QCEW, 2024). Chemicals and electrical work carry the waste, solvent and substance questions the CNH Code lists, and machinery suppliers carry the customer quality demands that an ISO 9001 system answers. The two standards run well together in one system.
Our Milwaukee page covers the neighboring metro, and what federal OSHA jurisdiction means for Wisconsin employers.
Which edition to build to
The Code names ISO 14001 without an edition. ISO 14001:2026 was published on April 15, 2026, so a system started now should be built to the current edition. If your company already runs ISO 9001, note that ISO 9001:2026 was published in September 2026. Updating both in one project avoids changing the same procedures twice.
How we work with companies here
We work with Racine companies on site and remotely, and we put the on-site days where being in the building changes the outcome: the aspects and impacts walk, the compliance obligations review, the first internal audit cycle and the certification audits.
The most useful first meeting here is a reading exercise: the CNH Supplier Code and any customer code on your purchase orders, last year’s sustainability questionnaire or rating, and your air, wastewater and waste permits. That shows which answers you already have evidence for and which ones a system would supply.
The consultant who scopes the engagement does the work. No handoff to a junior implementer after the sale.
100% certification success. Every client we have taken to a Stage 2 certification audit has been certified, with no major nonconformities. 100% of surveyed clients would recommend us. Every client who answered our client satisfaction survey said they would recommend Glocal Insight.
ISO standards we help Racine companies with
This page focuses on ISO 14001, and we can help Racine companies with any of the standards below. If you are deciding whether to bring in outside help, start with what an ISO consultant does, how fees work and when certification is worth it.
ISO 14001 in Racine
The Racine metro has 43 establishments in chemical, plastics and rubber, paper, primary metal, and metal coating and finishing manufacturing (BLS QCEW, 2024 annual averages), the industries where air, water and waste obligations tend to be heaviest. Chemical manufacturing employment here runs about 6.1 times its national share. ISO 14001 gives a site one system for its permits, its environmental aspects and its customers' sustainability questionnaires.
The focus of this page. ISO 14001 consultants → · Free ISO 14001:2026 gap analysis checklist · Free ISO 14001 internal audit checklist
ISO 9001 in Racine
The Racine metro has 290 manufacturing establishments, 250 of them with fewer than 100 employees (US Census County Business Patterns, 2023), and 158 durable-goods wholesalers (BLS QCEW, 2024 annual averages). ISO 9001 is the most widely held ISO management system certification and the base that AS9100, ISO 13485 and the other sector standards build on.
ISO 9001 consultants → · Free ISO 9001:2026 gap analysis checklist · Free ISO 9001 internal audit checklist
ISO 45001 in Racine
The Racine metro has 290 manufacturing establishments (US Census County Business Patterns, 2023) and 432 construction establishments (BLS QCEW, 2024 annual averages). ISO 45001 turns a safety program into a management system, with hazard identification, worker participation and incident follow-up that a customer, general contractor or insurer can check.
AS9100 in Racine
The Racine metro has 4 aerospace product and parts establishments and 26 machine shops (BLS QCEW, 2024 annual averages). AS9100 adds aerospace requirements to ISO 9001, and it reaches machine shops and processors through the purchase orders of the aerospace companies they supply; distributors use AS9120.
ISO 27001 in Racine
The Racine metro has 103 computer systems design, software publishing and hosting establishments (BLS QCEW, 2024 annual averages). ISO 27001 is the internationally recognized certification for an information security management system, and a common answer to enterprise customers' security questionnaires.
ISO 27001 consultants → · Free ISO 27001 internal audit checklist · ISO 27001 audit days calculator
ISO 42001 in Racine
The Racine metro has 52 software publishers and custom programming firms (BLS QCEW, 2024 annual averages). ISO/IEC 42001 is the management system standard for organizations that develop or use AI, and it fits alongside an existing ISO 27001 system. See which state AI laws reference it.
ISO 13485 in Racine
The Racine metro has 5 medical equipment and electromedical device manufacturing establishments (BLS QCEW, 2024 annual averages). ISO 13485 is the quality management standard for medical devices, and since February 2, 2026 the FDA's Quality Management System Regulation incorporates it by reference.
ISO 13485 consultants → · Free ISO 13485 internal audit checklist · ISO 13485 audit days calculator
ISO 17025 in Racine
The Racine metro has 8 testing laboratories (BLS QCEW, 2024 annual averages). ISO/IEC 17025 is the accreditation standard for testing and calibration laboratories, including in-house labs whose results customers or regulators rely on.
What an engagement covers
- Customer code review We map the CNH Supplier Code of Conduct and any other customer codes on your orders to what you already do, and list what is required, what is recommended and what you can evidence.
- ISO 14001 system built for the questionnaire Aspects, compliance obligations, objectives and monitoring that produce the data a yearly supplier sustainability assessment asks for. See ISO 14001.
- Compliance obligations register Air, wastewater, waste and substance requirements in one register, with owners and review dates.
- Flow-down to your own suppliers Purchasing controls that pass customer code principles to your subcontractors, with a record that you did.
- Integrated with ISO 9001 and 45001 One set of procedures and one audit program for environment, quality and safety, where that suits your customers.
- Gap analysis and roadmap Two to four weeks, fixed scope and price, with a clear go or no-go before real money is committed.
- Internal audit and management review Auditor-grade internal audits and a facilitated management review that produces recorded decisions.
Questions we get from companies in this market
Does CNH require ISO 14001 certification from its suppliers?
Not in its Supplier Code of Conduct. The Code says an environmental management system according to international standards, naming ISO 14001 and EMAS, is strongly recommended. It does not mention certification. A certificate is still the simplest way to prove you have a working system when CNH requests documentation or an audit. Check your purchase order and any program-specific terms for separate requirements.
What is CNH's yearly supplier sustainability assessment?
CNH's supplier portal says it assesses its supply chain every year, and that under a process adopted in October 2025 each supplier is asked annually to share a third-party sustainability rating score or complete a questionnaire. The former CNH questionnaire is no longer active. An ISO 14001 system keeps the policy, targets, emissions and waste data and legal compliance evidence that such an assessment asks for.
We sell services, not parts, to the Racine plant. Does the Code apply to us?
Yes. The Code applies to all persons and entities who sell goods or services of any type to CNH or any of its subsidiaries. Maintenance, logistics, coating and contract labor providers are covered as much as parts suppliers.
Does the CNH Code reach our own suppliers?
Indirectly. Each supplier is responsible for communicating the Code's principles to its employees, subsidiaries, affiliates and subcontractors. In practice that means a line in your purchasing terms and some evidence that subcontractors received it, which an ISO 14001 or ISO 9001 purchasing process can carry.
How many manufacturers are in the Racine metro?
On the federal metropolitan definition, which is Racine County alone, 290 manufacturing establishments, 250 of them with fewer than 100 employees, employing about 17,102 people (US Census County Business Patterns, 2023). Milwaukee is in the same combined statistical area but not in this metro; Kenosha County is a separate metro inside the Chicago combined area.
What will ISO 14001 certification cost?
Audit days are set from the number of people within your certification scope against a published table, then adjusted for the environmental complexity of your operations. A plant with significant air emissions or wastewater sits higher than an assembly shop. Our certification cost breakdown explains how audit days are set and what moves them.