Madison, Wisconsin
ISO consultants for Madison device makers and diagnostics companies.
Since 2025, a test run in your own laboratory stays laboratory testing. A kit, reagent or instrument you sell is a device, and since February 2026 its quality system is built on ISO 13485. Sort your products before you scope a system.
ISO certification consulting in Madison at a glance
- Who we are
- Glocal Insight: senior ISO management system consultants working with Madison companies on site and remotely. The consultant who scopes the work does the work.
- Standards
- ISO 9001, AS9100, ISO 14001, ISO 45001, ISO 27001, ISO 42001, ISO 13485, ISO 17025, plus internal audits, auditor training and ISO certification maintenance.
- Typical timeline
- For ISO 9001 at a company of 10 to 100 people, about three to four months from kickoff to the Stage 2 audit. Week by week.
- Cost
- A standalone gap analysis is typically in the low five figures; full implementation depends on scope. Certification body fees are separate. How certification costs are set, or estimate your audit days.
- Track record
- 100% certification success. 100% of surveyed clients would recommend us.
- Contact
- (816) 535-0738 or start a conversation.
The line between a Madison lab and a device maker
The Madison metropolitan area is four counties: Dane, Columbia, Green and Iowa. It has 709 manufacturing establishments, 603 of them with fewer than 100 employees — 85% of the base — employing about 40,181 people (US Census County Business Patterns, 2023). It also carries an unusual concentration of medical and diagnostic laboratories, at about 4.4 times the national rate (BLS QCEW, 2024 annual averages).
FDA's device registration database reads like a cross-section of the industry. At Madison addresses it lists anesthesia machines and ventilators from Datex-Ohmeda, radiation therapy systems from Accuray, microwave ablation from NeuWave Medical, and diagnostics: Cologuard and Cologuard Plus at three registered Exact Sciences campuses, and Promega's reagents, nucleic acid instruments and microsatellite-instability test system.
For diagnostics companies here, the rules on both sides of one line changed within a year. On March 31, 2025, a federal court vacated FDA's rule that would have treated laboratory-developed tests as devices, and in September 2025 FDA removed the rule's language from its regulations. On February 2, 2026, FDA's device quality rule became the Quality Management System Regulation, which incorporates ISO 13485:2016 by reference.
So every diagnostics product in Madison has to be sorted before anyone scopes a quality system. A test you design, validate and run in your own laboratory is laboratory testing. A kit, reagent, instrument or piece of software you label for diagnostic use and put in someone else's hands is a device, and its quality system is now built on ISO 13485.
Industry in Madison
- Exact Sciences Abbott subsidiary since March 23, 2026. FDA lists three Exact Sciences campuses at Madison addresses for Cologuard and Cologuard Plus (Class III).
- Promega FDA-registered at a Madison address for general purpose reagents, nucleic acid instruments and kits, and a microsatellite-instability test system; also registered as a contract manufacturer.
- Accuray FDA-registered at a Madison address as manufacturer of TomoTherapy, Radixact and CyberKnife radiation therapy systems.
- Datex-Ohmeda FDA-registered at a Madison address for anesthesia machines, ventilators and vaporizers.
- NeuWave Medical FDA-registered at a Madison address for its microwave ablation system and accessories.
Which side of the line a product sits on
The May 2024 rule had changed one phrase. It added “including when the manufacturer of these products is a laboratory” to FDA's definition of in vitro diagnostic products in 21 CFR 809.3. The Eastern District of Texas vacated the rule in American Clinical Laboratory Association v. FDA, and FDA's final rule of September 19, 2025 took the phrase out, returning the definition to its earlier text.
That leaves laboratory testing where it was: under CLIA, which CMS administers. CMS describes CLIA as regulating laboratories that test patient specimens to ensure accurate and reliable results. A laboratory-developed test is treated as high complexity, and the laboratory has to establish certain performance characteristics in its own environment before releasing results. CMS also says CLIA does not address a test's clinical validity.
Three practical consequences follow.
A laboratory is not a device manufacturer because it develops its own tests. Its quality obligations come from CLIA, not from Part 820. ISO 13485 is not the instrument for that work.
A product that leaves the building changes category. A kit or reagent set labeled for diagnostic use and sold to other laboratories is an in vitro diagnostic device. The day a lab-developed assay becomes a distributed kit, the design history, risk files and production records have to exist under a device quality system.
A company that does both runs two systems with a shared core. Document control, training, supplier management and complaint handling can be common. Design control, production and process controls, and reporting to FDA have to sit inside the device scope. Draw that scope deliberately, product by product, before you build anything.
What the QMSR asks of a Madison device maker
Section 820.10 tells a manufacturer to document a quality management system that complies with the applicable requirements of ISO 13485, and adds FDA's own requirements on top: identification and traceability, reporting to FDA, handling of advisory notices, and, for Class II and III devices and some Class I devices, compliance with ISO 13485's design and development clause. If your system was built to the old Quality System Regulation, an ISO 13485 gap analysis against that list is the first job.
FDA does not ask for a certificate. Its QMSR questions and answers say FDA will not require certificates of conformance to ISO 13485, will not issue them, and that a certificate will not exempt a manufacturer from inspection. Certification is a separate decision, driven by customers, distributors and the other markets you sell into.
Your internal records are now in scope for the investigator. FDA says the QMSR gives it authority to inspect management review, quality audit and supplier audit reports; the old exception that shielded them is not carried forward. Write internal audits and management review minutes as documents an FDA investigator will read.
FDA also stopped using its long-standing inspection technique on February 2, 2026, and now inspects device manufacturers under a revised compliance program, CP 7382.850. An inspection prepared for under the old approach should be prepared for again.
Reagents, instruments and the Class I exemption
Madison's diagnostics base includes companies that list very different products under one registration. Promega's listings, for example, include general purpose reagents such as polymerases, buffers and nucleotides; nucleic acid purification instruments and kits; a microsatellite-instability test system in a higher device class; and products it registers as a contract manufacturer for another company.
General purpose reagents are classified under 21 CFR 864.4010. They are Class I, exempt from premarket notification subject to the limits in 864.9, and, if not labeled or represented as sterile, exempt from most of Part 820. The records and complaint file requirements in section 820.35 still apply.
The lesson for any reagent or instrument company here: the exemption belongs to the product's classification regulation, not to the company. One site can hold exempt reagents and a fully covered Class II or Class III assay. Map each listed product to its regulation and write your QMS scope from that map.
The rest of the Madison base
Diagnostics is the sharpest part of the picture, not all of it. Machinery manufacturing runs at about 1.8 times the national concentration here, and publishing, which includes software publishers, at about 6.1 times (BLS QCEW, 2024 annual averages). Insurance carriers and related activities run at about 1.7 times.
For machinery makers and the shops that supply them, ISO 9001 is the usual system; our ISO 9001:2026 transition guide covers the edition question. For software companies and insurers that hold health or financial data for clients, ISO 27001 is the standard customers recognize. Where software is itself a medical device, it falls under the same Part 820 sorting as any other device.
For a comparison with a market where the device question turns on who writes the specification, see our Boston page.
How we work with companies here
We work with Madison companies on site and remotely, and we put the on-site days where being in the building changes the outcome: the gap analysis walkthrough, the first internal audit cycle, mock FDA inspection preparation and the certification audits.
The most useful first meeting here is usually a sorting exercise: every product you make, run or sell, whether it is a laboratory service or a device, its classification regulation and class, and which parts of Part 820 apply to it. That settles the scope of your ISO 13485 system before anyone prices one.
The consultant who scopes the engagement does the work. No handoff to a junior implementer after the sale.
100% certification success. Every client we have taken to a Stage 2 certification audit has been certified, with no major nonconformities. 100% of surveyed clients would recommend us. Every client who answered our client satisfaction survey said they would recommend Glocal Insight.
ISO standards we help Madison companies with
This page focuses on ISO 13485, and we can help Madison companies with any of the standards below. If you are deciding whether to bring in outside help, start with what an ISO consultant does, how fees work and when certification is worth it.
ISO 13485 in Madison
The Madison metro has 27 medical equipment and electromedical device manufacturing establishments (BLS QCEW, 2024 annual averages). ISO 13485 is the quality management standard for medical devices, and since February 2, 2026 the FDA's Quality Management System Regulation incorporates it by reference.
The focus of this page. ISO 13485 consultants → · Free ISO 13485 internal audit checklist · ISO 13485 audit days calculator
ISO 9001 in Madison
The Madison metro has 709 manufacturing establishments, 603 of them with fewer than 100 employees (US Census County Business Patterns, 2023), and 622 durable-goods wholesalers (BLS QCEW, 2024 annual averages). ISO 9001 is the most widely held ISO management system certification and the base that AS9100, ISO 13485 and the other sector standards build on.
ISO 9001 consultants → · Free ISO 9001:2026 gap analysis checklist · Free ISO 9001 internal audit checklist
ISO 27001 in Madison
The Madison metro has 1,061 computer systems design, software publishing and hosting establishments (BLS QCEW, 2024 annual averages). ISO 27001 is the internationally recognized certification for an information security management system, and a common answer to enterprise customers' security questionnaires.
ISO 27001 consultants → · Free ISO 27001 internal audit checklist · ISO 27001 audit days calculator
AS9100 in Madison
The Madison metro has 2 aerospace product and parts establishments and 34 machine shops (BLS QCEW, 2024 annual averages). AS9100 adds aerospace requirements to ISO 9001, and it reaches machine shops and processors through the purchase orders of the aerospace companies they supply; distributors use AS9120.
ISO 14001 in Madison
The Madison metro has 108 establishments in chemical, plastics and rubber, paper, primary metal, and metal coating and finishing manufacturing (BLS QCEW, 2024 annual averages), the industries where air, water and waste obligations tend to be heaviest. ISO 14001 gives a site one system for its permits, its environmental aspects and its customers' sustainability questionnaires.
ISO 14001 consultants → · Free ISO 14001:2026 gap analysis checklist · Free ISO 14001 internal audit checklist
ISO 45001 in Madison
The Madison metro has 709 manufacturing establishments (US Census County Business Patterns, 2023) and 1,704 construction establishments (BLS QCEW, 2024 annual averages). ISO 45001 turns a safety program into a management system, with hazard identification, worker participation and incident follow-up that a customer, general contractor or insurer can check.
ISO 42001 in Madison
The Madison metro has 591 software publishers and custom programming firms (BLS QCEW, 2024 annual averages). ISO/IEC 42001 is the management system standard for organizations that develop or use AI, and it fits alongside an existing ISO 27001 system. See which state AI laws reference it.
ISO 17025 in Madison
The Madison metro has 30 testing laboratories (BLS QCEW, 2024 annual averages). ISO/IEC 17025 is the accreditation standard for testing and calibration laboratories, including in-house labs whose results customers or regulators rely on.
What an engagement covers
- Lab-or-device product map Each product sorted as laboratory testing or device, mapped to its classification regulation, class and Part 820 exemptions, with the QMS scope that follows.
- QMSR gap analysis Your system checked against ISO 13485:2016 plus FDA's added requirements in section 820.10: traceability, reporting, advisory notices and design control. See ISO 13485.
- Inspection-ready internal records Management review, internal audit and supplier audit reports written for an FDA investigator who is now entitled to read them.
- Shared core for lab and device scopes One document control, training and complaint process serving both a CLIA laboratory and a device manufacturing scope, with the boundary drawn in writing.
- ISO 9001 and ISO 27001 for the wider base ISO 9001 for machinery makers and suppliers, ISO 27001 for software and data businesses.
- Gap analysis and roadmap Two to four weeks, fixed scope and price, with a clear go or no-go before real money is committed.
- Internal audit and management review Auditor-grade internal audits and a facilitated management review that produces recorded decisions.
Questions we get from companies in this market
Does FDA require ISO 13485 certification for Madison device makers?
No. Since February 2, 2026, the Quality Management System Regulation requires a manufacturer to document a quality management system that complies with the applicable requirements of ISO 13485:2016, plus FDA's added requirements. FDA says it will not require certificates of conformance to ISO 13485, will not issue them, and that a certificate does not exempt a manufacturer from inspection. Certification is still often worth having for customers and for other markets, but FDA does not ask for it.
Our Madison laboratory develops its own tests. Do we need ISO 13485?
Not because of FDA's 2024 rule. A federal court vacated that rule on March 31, 2025, and FDA removed its language from 21 CFR 809.3 in September 2025. A test you design, validate and run in your own laboratory is regulated as laboratory testing under CLIA. If you start selling the assay as a kit or reagent set to other laboratories, that product is a device and needs a device quality system.
We sell general purpose reagents. How much of Part 820 applies?
Usually very little. Under 21 CFR 864.4010, general purpose reagents are Class I, exempt from premarket notification subject to 864.9, and, if not labeled or represented as sterile, exempt from Part 820 except the records and complaint file requirements in section 820.35. The exemption is per product: a reagent line can be exempt while an assay made at the same site is fully covered.
What changed in FDA device inspections in 2026?
On February 2, 2026, FDA stopped using its Quality System Inspection Technique and began inspecting under compliance program 7382.850. The QMSR also gives FDA authority to inspect management review, quality audit and supplier audit reports, which the old regulation shielded. Write those records expecting an investigator to read them.
How many manufacturers are in the Madison metro?
On the federal metropolitan definition, 709 manufacturing establishments, 603 of them with fewer than 100 employees, employing about 40,181 people (US Census County Business Patterns, 2023). That definition covers Dane, Columbia, Green and Iowa counties. Janesville and Beloit belong to the wider combined statistical area but not to the metropolitan area, so figures that include them describe a larger market.
What will certification cost?
Audit days are set from the number of people within your certification scope against a published table, then adjusted for factors such as complexity and multiple sites. For a company with both a laboratory and a device scope, what you include in the certified scope changes the audit program, so make that decision deliberately. Our certification cost breakdown explains how audit days are set.