Appleton, Wisconsin
ISO consultants for Appleton job shops and contract manufacturers.
FDA's quality regulation stops at components and parts. It starts again the moment you assemble a working device, relabel one or repack one, whoever's name goes on the box. Know which side each product is on.
ISO certification consulting in Appleton at a glance
- Who we are
- Glocal Insight: senior ISO management system consultants working with Appleton companies on site and remotely. The consultant who scopes the work does the work.
- Standards
- ISO 9001, AS9100, ISO 14001, ISO 45001, ISO 27001, ISO 42001, ISO 13485, ISO 17025, plus internal audits, auditor training and ISO certification maintenance.
- Typical timeline
- For ISO 9001 at a company of 10 to 100 people, about three to four months from kickoff to the Stage 2 audit. Week by week.
- Cost
- A standalone gap analysis is typically in the low five figures; full implementation depends on scope. Certification body fees are separate. How certification costs are set, or estimate your audit days.
- Track record
- 100% certification success. 100% of surveyed clients would recommend us.
- Contact
- (816) 535-0738 or start a conversation.
Where a build-to-print shop becomes a device manufacturer
The Appleton metropolitan area is two counties: Outagamie and Calumet. It has 407 manufacturing establishments, 353 of them with fewer than 100 employees — 87% of the base — employing about 22,766 people (US Census County Business Patterns, 2023). Oshkosh and Neenah sit in a separate metropolitan area, Winnebago County, inside the same combined statistical area.
Appleton's industrial signature is machinery and metalworking. Machinery manufacturing runs at about 4.5 times the national concentration, machine shops at about 4.0 times, and coating, engraving and heat treating at about 4.1 times; fabricated metal products overall run at 2.65 times (BLS QCEW, 2024 annual averages).
The same pattern shows up in FDA's device registration database. In October 2026 it listed six device firms at Appleton addresses, and five of them were registered as contract manufacturers or as repackers and relabelers: contract manufacturers of neurodiagnostic equipment, powered wheelchair products, a walker and disposable medical bedding, and relabelers of first aid, wound care and orthopedic support products.
For a build-to-print supplier, one line in FDA's Quality Management System Regulation decides whose quality system FDA regulates. Part 820 does not apply to manufacturers of components or parts. It does apply to anyone who assembles a finished device, which FDA defines as one capable of functioning whether or not it is packaged, labeled, or sterilized, and to anyone who relabels or repacks one.
Industry in Appleton
- Ducommun LaBarge Technologies FDA-registered at an Appleton address as a contract manufacturer of electroencephalography and polysomnography systems and evoked-response stimulators (Class II).
- Lake Air Products FDA-registered at an Appleton address as a contract manufacturer of powered wheelchair products (Class II).
- Draper Products / R. Sabee Co. FDA-registered at an Appleton address as a contract manufacturer of disposable medical bedding (Class I).
- Valley Packaging Industries FDA-registered at an Appleton address to repack or relabel Class I products such as hot and cold packs, bandages, splints and braces.
- Apricity FDA-registered at an Appleton address as a contract manufacturer of a mechanical walker and as a relabeler of first aid kits.
Component or finished device: where the line falls
Section 820.3 defines a component as any raw material, substance, piece, part, software, firmware, labeling or assembly intended to be included in the finished, packaged and labeled device. It defines a manufacturer as anyone who designs, manufactures, fabricates, assembles or processes a finished device, and says the term includes those who perform relabeling, repacking, remanufacturing, installation, contract sterilization or specification development.
Three consequences follow, and each one changes a decision.
A machined part or a sub-assembly is a component. Its maker is outside Part 820. Whatever your device customer needs from you arrives through its purchasing documents and quality agreement, not from FDA. Read those first. An ISO 9001 system is the usual foundation for meeting them, and if the agreement asks for ISO 13485 practices such as lot traceability or change notification, they can be built into it for the parts concerned.
A unit that works when it leaves your dock is a finished device, even if your customer applies the label, the box and the brand. A contract assembler of a functioning device is a manufacturer of that device, and the regulation's quality system requirements, built on ISO 13485 since February 2, 2026, are yours to meet as well as your customer's.
Relabeling and repacking are manufacturing. The definition names them. A packaging company that relabels or repacks medical products for a brand owner needs a device quality system for that work, scaled to the products involved, unless a product's classification regulation exempts it. Some Class I regulations exempt a device from most of Part 820 but keep the records and complaint file requirements, so check each product.
What Appleton's device registrations show
Ducommun LaBarge Technologies is registered as a contract manufacturer only, for electroencephalography and polysomnography systems and evoked-response stimulators, listed as Class II devices. Lake Air Products is registered as a contract manufacturer for powered wheelchair products, also Class II. Draper Products and R. Sabee Co. are registered as a contract manufacturer of disposable medical bedding, a Class I product.
Apricity is registered both as a contract manufacturer, for a mechanical walker, and as a relabeler of first aid kits. Valley Packaging Industries is registered to repack or relabel a long list of Class I products: hot and cold packs, bandages and tape, splints, braces and supports. The sixth firm, CliC Eyewear, is registered to manufacture its own spectacle frames.
Each of these firms holds its own FDA registration. The establishment types they chose, contract manufacturer and repacker or relabeler, are the functions the regulation's definitions reach.
Your customer's audit of you is now FDA's business
FDA's QMSR questions and answers say the new regulation gives FDA authority to inspect management review, quality audits and supplier audit reports, which the old regulation shielded. For an Appleton contract manufacturer or parts supplier, that means the audit report your device customer writes about your plant can now be read by an FDA investigator inspecting the customer.
That changes how to prepare for a customer audit. Close findings with evidence, not promises, and keep your own record of how each one was resolved. A supplier with a clean, documented corrective action history is easier for a device maker to defend in an inspection, and easier to keep.
FDA also says it will not require ISO 13485 certificates and that a certificate does not exempt a manufacturer from inspection. Whether to certify an Appleton contract manufacturing scope to ISO 13485 is a commercial decision, usually set by what your device customers write into their supplier requirements.
When the work is metal, not medical
For job shops, heat treaters and coaters whose customers are machinery and industrial companies, the question is simpler: a quality management system that satisfies the purchase order and survives a customer audit. That is ISO 9001, and our ISO 9001:2026 transition guide covers the edition question for shops planning certification now.
Food manufacturing also runs high here, about 4.3 times the national concentration, and dairy products manufacturing at about 15.6 times (BLS QCEW, 2024 annual averages). Food safety certification schemes are specialist work outside our scope; for those plants we work on ISO 45001 and ISO 14001 systems.
For a Wisconsin market where the device question is whether a product is a laboratory test or a device, see our Madison page.
How we work with companies here
We work with Appleton companies on site and remotely, and we put the on-site days where being in the building changes the outcome: the gap analysis walkthrough, the first internal audit cycle and the certification audits.
The most useful first meeting here is usually a sorting exercise: every product you ship, whether it is a part, a sub-assembly, a finished device or relabeled goods, and the quality agreement that governs it. That settles whether you need ISO 9001, ISO 13485 or both before anyone prices a system.
The consultant who scopes the engagement does the work. No handoff to a junior implementer after the sale.
100% certification success. Every client we have taken to a Stage 2 certification audit has been certified, with no major nonconformities. 100% of surveyed clients would recommend us. Every client who answered our client satisfaction survey said they would recommend Glocal Insight.
ISO standards we help Appleton companies with
This page focuses on ISO 9001, and we can help Appleton companies with any of the standards below. If you are deciding whether to bring in outside help, start with what an ISO consultant does, how fees work and when certification is worth it.
ISO 9001 in Appleton
The Appleton metro has 407 manufacturing establishments, 353 of them with fewer than 100 employees (US Census County Business Patterns, 2023), and 248 durable-goods wholesalers (BLS QCEW, 2024 annual averages). ISO 9001 is the most widely held ISO management system certification and the base that AS9100, ISO 13485 and the other sector standards build on.
The focus of this page. ISO 9001 consultants → · Free ISO 9001:2026 gap analysis checklist · Free ISO 9001 internal audit checklist
ISO 13485 in Appleton
The Appleton metro has 4 medical equipment and electromedical device manufacturing establishments (BLS QCEW, 2024 annual averages). ISO 13485 is the quality management standard for medical devices, and since February 2, 2026 the FDA's Quality Management System Regulation incorporates it by reference.
ISO 13485 consultants → · Free ISO 13485 internal audit checklist · ISO 13485 audit days calculator
ISO 45001 in Appleton
The Appleton metro has 407 manufacturing establishments (US Census County Business Patterns, 2023) and 771 construction establishments (BLS QCEW, 2024 annual averages). ISO 45001 turns a safety program into a management system, with hazard identification, worker participation and incident follow-up that a customer, general contractor or insurer can check.
AS9100 in Appleton
The Appleton metro has 1 aerospace product and parts establishment and 50 machine shops (BLS QCEW, 2024 annual averages). AS9100 adds aerospace requirements to ISO 9001, and it reaches machine shops and processors through the purchase orders of the aerospace companies they supply; distributors use AS9120.
ISO 14001 in Appleton
The Appleton metro has 58 establishments in chemical, plastics and rubber, paper, primary metal, and metal coating and finishing manufacturing (BLS QCEW, 2024 annual averages), the industries where air, water and waste obligations tend to be heaviest. ISO 14001 gives a site one system for its permits, its environmental aspects and its customers' sustainability questionnaires.
ISO 14001 consultants → · Free ISO 14001:2026 gap analysis checklist · Free ISO 14001 internal audit checklist
ISO 27001 in Appleton
The Appleton metro has 137 computer systems design, software publishing and hosting establishments (BLS QCEW, 2024 annual averages). ISO 27001 is the internationally recognized certification for an information security management system, and a common answer to enterprise customers' security questionnaires.
ISO 27001 consultants → · Free ISO 27001 internal audit checklist · ISO 27001 audit days calculator
ISO 42001 in Appleton
The Appleton metro has 60 software publishers and custom programming firms (BLS QCEW, 2024 annual averages). ISO/IEC 42001 is the management system standard for organizations that develop or use AI, and it fits alongside an existing ISO 27001 system. See which state AI laws reference it.
ISO 17025 in Appleton
The Appleton metro has 4 testing laboratories (BLS QCEW, 2024 annual averages). ISO/IEC 17025 is the accreditation standard for testing and calibration laboratories, including in-house labs whose results customers or regulators rely on.
What an engagement covers
- Component or device determination Each product line classified against the definitions in 21 CFR 820.3 and 820.1(a)(2), with the quality system scope that follows.
- ISO 9001 system for build-to-print shops A quality management system built around your customers' purchase orders and supplier requirements. See ISO 9001.
- ISO 13485 for contract manufacturers and relabelers A device quality system for the scope that assembles, relabels or repacks finished devices, alongside an ISO 9001 system for the rest of the plant. See ISO 13485.
- Quality agreement review We read your device customers' quality agreements and supplier manuals and turn their requirements into procedures and records.
- Customer audit readiness Corrective action records and evidence packages written for a customer audit report an FDA investigator may later read.
- Gap analysis and roadmap Two to four weeks, fixed scope and price, with a clear go or no-go before real money is committed.
- Internal audit and management review Auditor-grade internal audits and a facilitated management review that produces recorded decisions.
Questions we get from companies in this market
We machine parts for a medical device company. Does FDA's QMSR apply to us?
Not directly. Under 21 CFR 820.1(a)(2), Part 820 does not apply to manufacturers of components or parts of finished devices, though FDA encourages them to consider its provisions. Your obligations come from your customer's purchase orders, supplier requirements and quality agreement. Read those to see whether they ask for ISO 9001, ISO 13485 or specific controls such as traceability and change notification.
We assemble a complete device under our customer's brand. Are we a manufacturer?
Very likely yes. Section 820.3 defines a manufacturer as anyone who designs, manufactures, fabricates, assembles or processes a finished device, and a finished device as one suitable for use or capable of functioning whether or not it is packaged, labeled or sterilized. If the unit works when it leaves your plant, the regulation reaches you. Several Appleton firms are registered with FDA on exactly that basis, as contract manufacturers.
We only relabel or repack medical products. Does Part 820 apply?
In principle, yes. The definition of manufacturer in section 820.3 expressly includes those who perform relabeling and repacking. How much of Part 820 applies then depends on each product's classification regulation: some Class I regulations exempt a device from most of Part 820 while keeping the records and complaint file requirements. Map each product you handle to its regulation and build the system that map calls for.
Are Oshkosh and Neenah part of the Appleton metro?
No. On the 2023 federal delineation, the Appleton metropolitan area is Outagamie and Calumet counties. Winnebago County, which includes Oshkosh and Neenah, is the separate Oshkosh-Neenah metropolitan area. The two are combined only in the wider Appleton-Oshkosh-Neenah combined statistical area, so figures for that area describe a larger market.
How many manufacturers are in the Appleton metro?
On the federal metropolitan definition, 407 manufacturing establishments, 353 of them with fewer than 100 employees, employing about 22,766 people (US Census County Business Patterns, 2023). Machinery manufacturing runs at about 4.5 times the national concentration and machine shops at about 4.0 times (BLS QCEW, 2024 annual averages).
What will certification cost?
Audit days are set from the number of people within your certification scope against a published table, then adjusted for factors such as complexity and multiple sites. For a plant with both an ISO 9001 scope and a device scope, whether they are audited together or separately changes the audit program, so make that decision deliberately. Our certification cost breakdown explains how audit days are set.