Skip to content

Wausau, Wisconsin

ISO consultants for Marathon County plants and machine shops.

OSHA's amputations emphasis program names the industries Wausau runs on: cheese, millwork, wood buildings and structural metal. It picks plants from a list and asks for four years of logs and your lockout program. Have them ready.

ISO certification consulting in Wausau at a glance

Who we are
Glocal Insight: senior ISO management system consultants working with Wausau companies on site and remotely. The consultant who scopes the work does the work.
Standards
ISO 9001, AS9100, ISO 14001, ISO 45001, ISO 27001, ISO 42001, ISO 13485, ISO 17025, plus internal audits, auditor training and ISO certification maintenance.
Typical timeline
For ISO 9001 at a company of 10 to 100 people, about three to four months from kickoff to the Stage 2 audit. Week by week.
Cost
A standalone gap analysis is typically in the low five figures; full implementation depends on scope. Certification body fees are separate. How certification costs are set, or estimate your audit days.
Track record
100% certification success. 100% of surveyed clients would recommend us.
Contact
(816) 535-0738 or start a conversation.

The industries OSHA's amputations program names

The Wausau metropolitan area is a single county: Marathon. Stevens Point and Wisconsin Rapids belong to the wider combined region but not to the metro. Marathon County has 240 manufacturing establishments, 192 of them with fewer than 100 employees — 80% of the base — employing about 18,923 people (US Census County Business Patterns, 2023). Manufacturing is close to three private-sector jobs in ten here, at 3.2 times the national concentration (BLS QCEW, 2024 annual averages).

What those plants make matters more than how many there are. Cheese and other dairy plants employ about 2,540 people at 39 times the national concentration. Millwork, the trade that makes windows and doors, runs at 28 times; prefabricated wood buildings at about 40; architectural and structural metal at about 9 (BLS QCEW, 2024).

Every one of those industries is named in OSHA’s National Emphasis Program on Amputations in Manufacturing Industries, renewed effective June 27, 2025 for five years. The program targets 91 six-digit industry codes. In Marathon County, industries made up entirely of listed codes account for at least 38% of private manufacturing jobs (BLS QCEW, 2024 annual averages), and the true share is higher, because the federal data suppresses several smaller listed industries.

Wisconsin runs no OSHA State Plan of its own for private employers, so this federal program applies here directly. Establishments are drawn for inspection from a master list, which an area office may work through in the random number order the list provides. For a Wausau plant in a listed industry, the useful question is not whether an inspector will ask about lockout and machine guarding, but whether the answers already exist on paper and on the floor.

Industry in Wausau

  • Greenheck, Schofield Corporate headquarters in Schofield, where it began as a sheet metal shop in 1947; fans, dampers, louvers and ventilation systems
  • Kolbe Windows & Doors Family-owned window and door maker founded in 1946, about 950 people, main facility in Wausau
  • Marathon County cheese and dairy plants 11 establishments, about 2,540 jobs, 39 times the national concentration (BLS QCEW, 2024); cheese is a listed amputations-program industry
  • Millwork and prefabricated wood buildings Millwork at 28 times and prefabricated wood buildings at about 40 times the national concentration (BLS QCEW, 2024); both are listed industries
  • Structural and architectural metal 16 establishments, about 1,715 jobs, 9 times the national concentration (BLS QCEW, 2024), all in listed industry codes

How the amputations program picks plants

OSHA’s directive, CPL 03-00-027, gives each area office a master list of establishments in the covered industries. The office either inspects the whole list, in whatever order uses its resources well, or works through it in the random number order the list provides, in which case it need not finish the list. It may also add manufacturing establishments based on local evidence, such as machinery amputations in the five years before the directive took effect. Being on the list is not an accusation. It is a matter of industry code and timing.

Some establishments come off. The directive deletes certain establishments with ten or fewer employees. A site inspected under the program in the previous 24 months with no reported amputations may be removed. Sites in OSHA’s Voluntary Protection Programs are exempt. The directive does not mention ISO 45001 or any other certificate, so a certificate does not take a plant off the list.

Before inspections under the renewed program began, each OSHA region and area office had to run a 90-day outreach period, aimed at industries added in 2025. One of the additions is prefabricated wood building manufacturing, which runs at about 40 times the national concentration in Marathon County. Farm machinery and several foundry codes were added too.

What the inspector asks for, and where ISO 45001 fits

At the opening conference the inspector should collect your OSHA 300 logs, 300A summaries and 301 incident reports for the current year and the previous three. The inspector also asks for your energy control program and procedures and your training records. The walkaround looks at exposure to nip, pinch, shear and cutting points not only during normal running but during setup, jam clearing, cleaning, lubrication and maintenance, and it can span multiple shifts and multiple employers.

That list is a management system audit in miniature, and each item maps to a clause of ISO 45001. Four years of logs is a trend, and clause 9.1 asks you to monitor and analyze it yourself. Lockout procedures are operational control under clause 8.1, and the hierarchy of controls in 8.1.2 puts guarding and elimination ahead of procedures and gloves. Training records are competence under 7.2. Hazards from a sanitation contractor or a temporary crew fall under 8.1.4.2.

The point is not that ISO 45001 satisfies OSHA. It does not, and no standard does. The point is that a working system produces the evidence the inspector asks for as a by-product. That includes the setup and jam-clearing hazards the walkaround targets. Those are the parts of the day a guarding program written for normal running tends to miss.

Cheese plants, millwork and metal shops

Cheese and dairy plants employ more people than any other listed industry the federal data shows here. Their machine exposures sit in cutting, packaging and conveying equipment, and in cleaning, which the walkaround covers as closely as production. Where a customer asks for a food safety scheme, that is specialist work outside our scope. ISO 45001 and ISO 14001 still serve the plant itself.

Millwork and wood products bring saws, molders, routers and clamping equipment. Kolbe Windows & Doors, a family-owned window and door maker founded in 1946, employs about 950 people and runs its main facility in Wausau. Fabricated metal employs about 4,210 people in the county at more than six times the national rate, and machinery about 3,170 (BLS QCEW, 2024). Greenheck, which began as a sheet metal shop in Schofield in 1947, still has its corporate headquarters there and makes fans, dampers, louvers and ventilation systems.

Those two trades feed a customer base that also asks for ISO 9001. An integrated system carries quality and safety in one set of procedures, one internal audit program and one management review, so the safety work does not become a second bureaucracy.

For the federal-only jurisdiction itself, and what it means for a Wisconsin employer, see our Milwaukee page.

How we work with companies here

We work with Wausau companies on site and remotely, and we put the on-site days where being in the building changes the outcome: the hazard walk on each shift, the lockout procedure verification, the first internal audit cycle and the certification audits.

The most useful first meeting here is a records check against the directive: four years of 300 logs, your written energy control program and machine-specific procedures, training records, and how you control contractors and cleaning crews. That shows in a day how far you are from a system an inspector or a registrar could audit.

The consultant who scopes the engagement does the work. No handoff to a junior implementer after the sale.

100% certification success. Every client we have taken to a Stage 2 certification audit has been certified, with no major nonconformities. 100% of surveyed clients would recommend us. Every client who answered our client satisfaction survey said they would recommend Glocal Insight.

ISO standards we help Wausau companies with

This page focuses on ISO 45001, and we can help Wausau companies with any of the standards below. If you are deciding whether to bring in outside help, start with what an ISO consultant does, how fees work and when certification is worth it.

ISO 45001 in Wausau

The Wausau metro has 240 manufacturing establishments (US Census County Business Patterns, 2023) and 364 construction establishments (BLS QCEW, 2024 annual averages). ISO 45001 turns a safety program into a management system, with hazard identification, worker participation and incident follow-up that a customer, general contractor or insurer can check.

The focus of this page. ISO 45001 consultants →

ISO 9001 in Wausau

The Wausau metro has 240 manufacturing establishments, 192 of them with fewer than 100 employees (US Census County Business Patterns, 2023), and 147 durable-goods wholesalers (BLS QCEW, 2024 annual averages). ISO 9001 is the most widely held ISO management system certification and the base that AS9100, ISO 13485 and the other sector standards build on.

ISO 9001 consultants → · Free ISO 9001:2026 gap analysis checklist · Free ISO 9001 internal audit checklist

ISO 14001 in Wausau

The Wausau metro has 27 establishments in chemical, plastics and rubber, paper, primary metal, and metal coating and finishing manufacturing (BLS QCEW, 2024 annual averages), the industries where air, water and waste obligations tend to be heaviest. ISO 14001 gives a site one system for its permits, its environmental aspects and its customers' sustainability questionnaires.

ISO 14001 consultants → · Free ISO 14001:2026 gap analysis checklist · Free ISO 14001 internal audit checklist

AS9100 in Wausau

The Wausau metro's 19 machine shops (BLS QCEW, 2024 annual averages) can supply aerospace programs anywhere. AS9100 adds aerospace requirements to ISO 9001 and arrives through the purchase orders of the aerospace companies a shop supplies; distributors use AS9120.

AS9100 consultants → · Free AS9100 internal audit checklist

ISO 27001 in Wausau

The Wausau metro has 61 computer systems design, software publishing and hosting establishments (BLS QCEW, 2024 annual averages). ISO 27001 is the internationally recognized certification for an information security management system, and a common answer to enterprise customers' security questionnaires.

ISO 27001 consultants → · Free ISO 27001 internal audit checklist · ISO 27001 audit days calculator

ISO 42001 in Wausau

The Wausau metro has 28 software publishers and custom programming firms (BLS QCEW, 2024 annual averages). ISO/IEC 42001 is the management system standard for organizations that develop or use AI, and it fits alongside an existing ISO 27001 system. See which state AI laws reference it.

ISO 42001 consultants →

ISO 13485 in Wausau

The Wausau metro has 5 medical equipment and electromedical device manufacturing establishments (BLS QCEW, 2024 annual averages). ISO 13485 is the quality management standard for medical devices, and since February 2, 2026 the FDA's Quality Management System Regulation incorporates it by reference.

ISO 13485 consultants → · Free ISO 13485 internal audit checklist · ISO 13485 audit days calculator

ISO 17025 in Wausau

The Wausau metro has 3 testing laboratories (BLS QCEW, 2024 annual averages). ISO/IEC 17025 is the accreditation standard for testing and calibration laboratories, including in-house labs whose results customers or regulators rely on.

ISO 17025 consultants →

What an engagement covers

  • NEP readiness review Your industry code against Appendix B of CPL 03-00-027, and the records the opening conference asks for, checked before an inspector does.
  • Energy control and guarding Machine-specific lockout procedures, periodic inspections and guarding assessments covering setup, jam clearing, cleaning and maintenance, not just normal running.
  • ISO 45001 system built for the floor Hazard identification, the hierarchy of controls, contractor coordination and worker participation as everyday processes. See ISO 45001.
  • Integrated with ISO 9001 One set of procedures, one audit program and one management review for quality and safety. See ISO 9001.
  • Injury data that gets used OSHA 300 logs reviewed by line, task and machine at management review, so trends are seen in-house first.
  • Gap analysis and roadmap Two to four weeks, fixed scope and price, with a clear go or no-go before real money is committed.
  • Internal audit and management review Auditor-grade internal audits and a facilitated management review that produces recorded decisions.

Questions we get from companies in this market

Is OSHA's amputations emphasis program inspecting Wausau manufacturers?

It applies here. CPL 03-00-027, effective June 27, 2025 for five years, targets 91 six-digit manufacturing industry codes nationwide, including cheese manufacturing, millwork, wood windows and doors, prefabricated wood buildings, structural and architectural metal, sheet metal work and machine shops. Wisconsin has no OSHA State Plan for private employers, so the federal program applies directly. Area offices work from a master list and may take it in the random number order it provides.

We are a small cheese plant. Can we be selected?

Yes, if your primary industry code is on the list. Cheese manufacturing is one of the listed codes. The directive removes certain establishments with ten or fewer employees and may remove a site inspected under the program in the previous 24 months with no reported amputations. Otherwise size alone does not take you off. Plan as if the inspection will happen and the records will be read.

Does ISO 45001 certification keep us off the inspection list?

No. The directive exempts sites participating in OSHA's Voluntary Protection Programs and does not mention ISO 45001 or any other certificate. What a working ISO 45001 system changes is the inspection itself: the logs, energy control procedures and training records the inspector asks for already exist and are kept current.

What records should we have ready?

The directive says the inspector should collect OSHA 300 logs, 300A summaries and 301 incident reports for the current year and the previous three, and will ask for your energy control program and procedures and your training records. The walkaround covers setup, jam clearing, cleaning, lubrication and maintenance as well as normal running, and can cover more than one shift and more than one employer.

How many manufacturers are in the Wausau metro?

On the federal metropolitan definition, which is Marathon County alone, 240 manufacturing establishments, 192 of them with fewer than 100 employees, employing about 18,923 people (US Census County Business Patterns, 2023). Stevens Point and Wisconsin Rapids are in the wider combined statistical area but not the metro, so regional figures describe a larger market.

What will ISO 45001 certification cost?

Audit days are set from the number of people within your certification scope against a published table, then adjusted for hazard level and complexity. Plants with heavy machine exposure sit at the higher end. Combining ISO 45001 with ISO 9001 in one integrated audit usually costs less than two separate programs. Our certification cost breakdown explains how audit days are set and what moves them.