Green Bay, Wisconsin
ISO consultants for Green Bay manufacturers and Green Tier applicants.
Wisconsin's Green Tier statute trades an ISO 14001-compliant environmental management system for the lowest inspection frequency the law allows. It asks for compliance, not a certificate, and it sets the audit cycle for you.
ISO certification consulting in Green Bay at a glance
- Who we are
- Glocal Insight: senior ISO management system consultants working with Green Bay companies on site and remotely. The consultant who scopes the work does the work.
- Standards
- ISO 9001, AS9100, ISO 14001, ISO 45001, ISO 27001, ISO 42001, ISO 13485, ISO 17025, plus internal audits, auditor training and ISO certification maintenance.
- Typical timeline
- For ISO 9001 at a company of 10 to 100 people, about three to four months from kickoff to the Stage 2 audit. Week by week.
- Cost
- A standalone gap analysis is typically in the low five figures; full implementation depends on scope. Certification body fees are separate. How certification costs are set, or estimate your audit days.
- Track record
- 100% certification success. 100% of surveyed clients would recommend us.
- Contact
- (816) 535-0738 or start a conversation.
The state program that rewards an environmental system
The Green Bay metropolitan area is three counties: Brown, Kewaunee and Oconto. It has 526 manufacturing establishments, 441 of them with fewer than 100 employees — 84% of the base — employing about 33,120 people (US Census County Business Patterns, 2023). Manufacturing runs at about 2.3 times the national concentration, food manufacturing at about 4.4 times and fabricated metal products at about 2.7 times (BLS QCEW, 2024 annual averages).
Plants like these live with air and water permits and the inspections that come with them. Wisconsin has a statute that lets an environmental management system change that relationship: the Green Tier program, Wis. Stat. 299.83, run by the Department of Natural Resources.
To enter Tier I, a company must implement, or commit to implementing within one year, an environmental management system “in compliance with the standards for environmental management systems issued by the International Organization for Standardization” — ISO 14001 — or one the DNR determines is functionally equivalent. In return, once the system is in place, the DNR conducts required inspections at the lowest frequency the governing statutes permit.
Two features of the statute decide what a Green Bay plant should do. It asks for compliance with the standard, not a certificate. And it builds the audit program in: annual EMS audits, with every third one performed by an outside auditor the DNR approves. An ISO 14001 system designed with that cycle in view does double duty.
Industry in Green Bay
- Little Rapids Corporation FDA-registered at a Green Bay address to manufacture examination gowns, drapes, dental bibs and disposable medical bedding, and absorbent towels as a contract manufacturer.
- Fox Converting FDA-registered at a Green Bay address for sterilization wrap (Class II) and non-sterile absorbent-tipped applicators.
- Services Plus FDA-registered at a Green Bay address as a contract manufacturer of dental bibs, cast covers and disposable medical bedding.
- Inland Label & Marketing Services Flexographic label and packaging printer; its Green Bay site is listed by the DNR as a Green Tier Tier 1 participant.
- ICP, Inc. FDA-registered at a Green Bay address as a specification developer for dental supplies, examination gloves and sterilization indicators.
What Tier I asks for, and what it gives
Beyond the system itself, a Tier I applicant must set objectives in at least two of three areas: improving environmental performance that is regulated, improving performance that is not, and voluntarily restoring, enhancing or preserving natural resources. It must explain why it chose them, describe its consultation with neighbors and other interested persons, and report annually on both the EMS audit and progress toward the objectives.
The statute also sets an enforcement-record screen. Recent criminal convictions, civil judgments for substantial harm, or enforcement suits within set look-back periods make an applicant ineligible, although the DNR secretary can waive some of them.
Three consequences follow, and each one changes a decision.
You do not need a certificate to apply. The statute accepts a system that complies with ISO 14001 or a DNR-approved equivalent, and an equivalent must still include an environmental policy committed to compliance, an analysis of environmental aspects and impacts, and EMS audits. If you already plan to certify, certify; if not, build to the standard and decide later.
Build the audit program to the statute's rhythm. Annual internal EMS audits and a DNR-approved outside auditor every third year can be planned alongside an ISO 14001 certification cycle rather than layered on top of it.
Pick objectives you can measure and report. Participation is public: the DNR lists participants on its website, sends annual notice of participation to local newspapers, and posts annual reports for participants such as The C.A. Lawton Co. in an online archive. Set objectives the plant can actually move.
Tier II is a contract, not an upgrade badge
Tier II asks for more. The EMS must already be implemented, not promised. An outside environmental auditor approved by the DNR conducts the EMS audit every year, and the participant also commits to an annual audit of compliance with its environmental requirements, reported to the DNR. The applicant has to show a record of superior environmental performance, and the enforcement look-back periods are longer.
What a Tier II participant receives is set in a negotiated participation contract, and the statute limits it: incentives must be proportional, and the DNR may not reduce required inspections or monitoring as an incentive if the compliance audit is done by someone other than an outside environmental auditor.
A De Pere plant in Brown County shows what that looks like in practice. In May 2025 the DNR renewed the Tier II contract of The C.A. Lawton Co., a foundry making large iron castings and machined components for agriculture, paper, mining and energy markets, for ten years. The DNR reported that its environmental management system had been certified to ISO 14001 for the past five years, and that the contract keeps it under the Green Tier Registration Permit, with the DNR prioritizing its air permit revisions.
Tier I participants listed by the DNR include a Green Bay site of Inland Label & Marketing Services and Wisconsin Department of Military Affairs facilities that include Green Bay.
Green Bay converters that are also device makers
Green Bay's paper economy is visible in an unexpected database. Paper manufacturing counts 32 private establishments in the metro (BLS QCEW, 2024; employment is not published), and FDA's device registration database lists converters at Green Bay addresses that make medical products.
Little Rapids Corporation is registered to manufacture examination gowns, drapes and capes, dental bibs and disposable medical bedding, and to make absorbent medical towels as a contract manufacturer. Services Plus is registered as a contract manufacturer of dental bibs, cast covers and disposable bedding. Fox Converting is registered for sterilization wrap, a Class II device, and non-sterile absorbent-tipped applicators.
For converters, how much of FDA's quality regulation applies is set product by product, by each product's classification regulation. A Class II product is generally subject to the Quality Management System Regulation, which since February 2, 2026 is built on ISO 13485. Map every listed product before you decide what system to build.
Food, metal and the rest of the base
Food manufacturing runs at about 4.4 times the national concentration. Food safety certification schemes are specialist work outside our scope; the environmental side of a food plant, its water use and wastewater, is where ISO 14001 and Green Tier apply.
Fabricated metal shops typically start with ISO 9001. Truck transportation also runs at about 2.9 times the national concentration (BLS QCEW, 2024), and fleets and their maintenance operations are a natural fit for ISO 45001.
For a market where a state law gives an environmental management system a direct regulatory payoff in a different way, see our Austin page.
How we work with companies here
We work with Green Bay companies on site and remotely, and we put the on-site days where being in the building changes the outcome: the aspects and impacts walkthrough, the first internal audit cycle and the certification audits.
The most useful first meeting here is usually a fit test: your permits, your enforcement history against the statute's look-back periods, the objectives you could credibly report on, and whether Tier I, Tier II or ISO 14001 certification alone is the right target. That settles the scope before anyone prices a system.
The consultant who scopes the engagement does the work. No handoff to a junior implementer after the sale.
100% certification success. Every client we have taken to a Stage 2 certification audit has been certified, with no major nonconformities. 100% of surveyed clients would recommend us. Every client who answered our client satisfaction survey said they would recommend Glocal Insight.
ISO standards we help Green Bay companies with
This page focuses on ISO 14001, and we can help Green Bay companies with any of the standards below. If you are deciding whether to bring in outside help, start with what an ISO consultant does, how fees work and when certification is worth it.
ISO 14001 in Green Bay
The Green Bay metro has 89 establishments in chemical, plastics and rubber, paper, primary metal, and metal coating and finishing manufacturing (BLS QCEW, 2024 annual averages), the industries where air, water and waste obligations tend to be heaviest. ISO 14001 gives a site one system for its permits, its environmental aspects and its customers' sustainability questionnaires.
The focus of this page. ISO 14001 consultants → · Free ISO 14001:2026 gap analysis checklist · Free ISO 14001 internal audit checklist
ISO 9001 in Green Bay
The Green Bay metro has 526 manufacturing establishments, 441 of them with fewer than 100 employees (US Census County Business Patterns, 2023), and 322 durable-goods wholesalers (BLS QCEW, 2024 annual averages). ISO 9001 is the most widely held ISO management system certification and the base that AS9100, ISO 13485 and the other sector standards build on.
ISO 9001 consultants → · Free ISO 9001:2026 gap analysis checklist · Free ISO 9001 internal audit checklist
ISO 45001 in Green Bay
The Green Bay metro has 526 manufacturing establishments (US Census County Business Patterns, 2023) and 891 construction establishments (BLS QCEW, 2024 annual averages). ISO 45001 turns a safety program into a management system, with hazard identification, worker participation and incident follow-up that a customer, general contractor or insurer can check.
ISO 13485 in Green Bay
The Green Bay metro has 14 medical equipment and electromedical device manufacturing establishments (BLS QCEW, 2024 annual averages). ISO 13485 is the quality management standard for medical devices, and since February 2, 2026 the FDA's Quality Management System Regulation incorporates it by reference.
ISO 13485 consultants → · Free ISO 13485 internal audit checklist · ISO 13485 audit days calculator
AS9100 in Green Bay
The Green Bay metro's 44 machine shops (BLS QCEW, 2024 annual averages) can supply aerospace programs anywhere. AS9100 adds aerospace requirements to ISO 9001 and arrives through the purchase orders of the aerospace companies a shop supplies; distributors use AS9120.
ISO 27001 in Green Bay
The Green Bay metro has 188 computer systems design, software publishing and hosting establishments (BLS QCEW, 2024 annual averages). ISO 27001 is the internationally recognized certification for an information security management system, and a common answer to enterprise customers' security questionnaires.
ISO 27001 consultants → · Free ISO 27001 internal audit checklist · ISO 27001 audit days calculator
ISO 42001 in Green Bay
The Green Bay metro has 95 software publishers and custom programming firms (BLS QCEW, 2024 annual averages). ISO/IEC 42001 is the management system standard for organizations that develop or use AI, and it fits alongside an existing ISO 27001 system. See which state AI laws reference it.
ISO 17025 in Green Bay
The Green Bay metro has 17 testing laboratories (BLS QCEW, 2024 annual averages). ISO/IEC 17025 is the accreditation standard for testing and calibration laboratories, including in-house labs whose results customers or regulators rely on.
What an engagement covers
- Green Tier eligibility review Your permits, enforcement record and objectives checked against Wis. Stat. 299.83 for Tier I and Tier II, with a recommendation on which, if either, to pursue.
- ISO 14001 system built to the statute An environmental management system that meets ISO 14001 and carries the statute's objectives, consultation and reporting requirements. See ISO 14001.
- Audit program on the Green Tier cycle Annual EMS audits planned so the outside-auditor year and any certification audits line up, plus the annual audit and progress reports.
- Tier II compliance audit readiness For Tier II applicants, an annual audit of compliance with applicable environmental requirements, structured for reporting to the DNR.
- ISO 13485 for medical converters Product-by-product mapping of FDA classification and the quality system that follows. See ISO 13485.
- Gap analysis and roadmap Two to four weeks, fixed scope and price, with a clear go or no-go before real money is committed.
- Internal audit and management review Auditor-grade internal audits and a facilitated management review that produces recorded decisions.
Questions we get from companies in this market
Does Wisconsin's Green Tier program require ISO 14001 certification?
No. Wis. Stat. 299.83 requires an environmental management system in compliance with the ISO standard, or one the DNR determines is functionally equivalent. A functionally equivalent system must still include an environmental policy committed to compliance, an analysis of environmental aspects and impacts, and EMS audits. A certificate is one way to show the system exists; the statute does not demand it.
What does a Green Bay plant get from Tier I?
Once the system is implemented, the DNR conducts required inspections at the lowest frequency the governing statutes permit, though it can still inspect if it suspects noncompliance. Participants also receive a numbered certificate of recognition, a listing on the DNR website, annual notice of participation to local newspapers, use of the Green Tier logo and an assigned DNR contact.
What is the difference between Tier I and Tier II?
Tier I accepts a commitment to implement the system within a year and asks for annual EMS audits with an outside auditor every third year. Tier II requires a system already in place, an outside auditor every year, an annual compliance audit reported to the DNR, a record of superior environmental performance and longer enforcement look-back periods. Its benefits are negotiated in a participation contract, within limits the statute sets.
Who can audit a Green Tier environmental management system?
Your own internal auditors can perform the annual EMS audits in Tier I, except that every third audit must be performed by an outside environmental auditor approved by the DNR. In Tier II, the outside auditor performs the EMS audit every year. Plan the internal program so those audits and any ISO 14001 certification audits do not duplicate each other.
How many manufacturers are in the Green Bay metro?
On the federal metropolitan definition, 526 manufacturing establishments, 441 of them with fewer than 100 employees, employing about 33,120 people (US Census County Business Patterns, 2023). That definition covers Brown, Kewaunee and Oconto counties. Shawano County belongs to the wider combined statistical area but not to the metropolitan area, and Marinette County is in neither.
Our Green Bay converting plant makes medical products. Do we need ISO 13485?
It depends on each product's FDA classification. Since February 2, 2026, FDA's device quality regulation requires a quality management system that complies with ISO 13485, but classification regulations exempt some Class I products from most of it. A Class II product, such as a sterilization wrap, should be treated as covered unless its classification regulation says otherwise. FDA itself does not require an ISO 13485 certificate; a customer may, so read your quality agreements too.