Eau Claire, Wisconsin
ISO consultants for Chippewa Valley manufacturers and electronics suppliers.
TTM makes advanced circuit boards in Chippewa Falls and bought a 750,000-square-foot plant in Eau Claire. Its supplier agreement recognizes ISO 9001 and AS9100, then asks key suppliers for a year's notice of change and wants containment within 48 hours when parts go wrong.
ISO certification consulting in Eau Claire at a glance
- Who we are
- Glocal Insight: senior ISO management system consultants working with Eau Claire companies on site and remotely. The consultant who scopes the work does the work.
- Standards
- ISO 9001, AS9100, ISO 14001, ISO 45001, ISO 27001, ISO 42001, ISO 13485, ISO 17025, plus internal audits, auditor training and ISO certification maintenance.
- Typical timeline
- For ISO 9001 at a company of 10 to 100 people, about three to four months from kickoff to the Stage 2 audit. Week by week.
- Cost
- A standalone gap analysis is typically in the low five figures; full implementation depends on scope. Certification body fees are separate. How certification costs are set, or estimate your audit days.
- Track record
- 100% certification success. 100% of surveyed clients would recommend us.
- Contact
- (816) 535-0738 or start a conversation.
Recognized, not required, and what follows
The Eau Claire metropolitan area is two counties: Chippewa and Eau Claire. Menomonie, in Dunn County, belongs to the wider combined region but not to the metro. The two counties have 234 manufacturing establishments, 197 of them with fewer than 100 employees — 84% of the base — employing about 11,822 people (US Census County Business Patterns, 2023). Plastics products run at 3.5 times the national concentration and industrial mold making at nearly 20 times (BLS QCEW, 2024 annual averages).
Electronics is the growth story. TTM Technologies runs an advanced printed circuit board plant in Chippewa Falls, and in July 2025 it bought a 750,000-square-foot facility in Eau Claire, formerly a disk drive plant, saying it would support future high-volume US production of advanced circuit boards; in 2026 TTM said it will start some production and an R&D innovation center there. In October 2026 the state announced that HPE plans to invest $75 million over five years in its Chippewa Falls operations.
TTM publishes what it expects of suppliers. Its Supplier Quality Agreement, revision C of 2020, reviewed without change in June 2024, applies alongside the quality assurance provisions of any listed plant that issues the order. Its first quality clause is one sentence: “ISO 9001 / AS9100 Certified Suppliers are recognized by TTM as having a valid Quality System.”
Recognized, not required. Section 1.3, headed “Non-ISO Certified Suppliers,” lists sixteen controls a supplier without the certificate must have instead: configuration control, process documentation, internal audits, first article inspection, nonconforming product, corrective action, training, calibration and more. That is most of a quality management system without the certificate. For a Chippewa Valley shop, ISO 9001 certification is the short route to a recognized system. The rest of the agreement shows what that system has to carry once orders flow.
Industry in Eau Claire
- TTM Technologies, Chippewa Falls Advanced printed circuit board plant; TTM's published Supplier Quality Agreement recognizes ISO 9001 and AS9100 certified suppliers
- TTM Technologies, Eau Claire 750,000-square-foot former disk drive facility bought in July 2025; TTM plans some production and an R&D innovation center there, with no start date given
- Hewlett Packard Enterprise, Chippewa Falls Nearly 500 employees; $75 million over five years announced October 2026 for testing, warehousing and manufacturing capacity
- Chippewa Valley plastics products makers 15 establishments, about 1,400 jobs, 3.5 times the national concentration (BLS QCEW, 2024)
- Industrial mold makers 5 establishments, about 345 jobs, nearly 20 times the national concentration (BLS QCEW, 2024)
What the agreement asks for beyond the certificate
A year’s notice of change. Key suppliers must notify TTM in writing at least 12 months before changing material or processes in ways that may affect form, fit, function, reliability, performance, regulatory compliance or safety, and then get formal approval. The list includes manufacturing location, equipment, raw material suppliers, test methods and subcontracted services. In ISO 9001 terms that is change control with a long lead time, and it belongs in your planning process, not your sales process.
Fast answers when something ships wrong. A supplier that knows it shipped nonconforming material must tell TTM within 24 hours. After a TTM notification, containment and a status report are due within 48 hours and a corrective action plan within two weeks unless the request says otherwise. Corrective action that runs on that clock needs a working process before the first complaint arrives.
Records and access. Quality records are kept at least seven years after the procurement requirements are fulfilled, or longer if the purchase order says so. TTM, its customers and regulators get right of access to supplier and sub-tier facilities. Each supplier must flow the same requirements down to its own vendors and subcontractors.
Where AS9100 and ISO/IEC 17025 come in
Two clauses read like aerospace requirements because they are. Section 2.7 asks for a foreign object debris prevention program proportional to the sensitivity of the product. Section 2.10 governs counterfeit parts prevention by SAE AS5553, AS6496 and AS6174, and accepts raw materials only with a lot-specific certificate of conformance from the original material manufacturer. Both are requirements of AS9100, and neither is spelled out in ISO 9001. For a supplier choosing between the two, those clauses are the deciding detail.
Calibration has its own clause. TTM’s calibration subcontractors must keep a documented program compliant with ANSI NCS Z540-3, with traceability to NIST, or with ISO/IEC 17025. For a calibration provider here, ISO/IEC 17025 accreditation is the route the agreement names that most other customers also recognize. For a supplier using one, check its accredited scope covers the instruments you send.
TTM also posts separate quality assurance provisions for listed plants, including Chippewa Falls, and calls them mandatory for purchase orders from that plant. Read the one named on your purchase order alongside the agreement.
Environmental declarations
TTM’s environmental requirements for suppliers apply to all purchase orders. They encourage an environmental management system consistent with ISO 14001. They require a signed RoHS declaration covering all ten restricted substances for every material supplied. Suppliers must also report REACH Candidate List substances and provide safe-use information above 0.1%. TTM’s requirements add that packaging counts as a product under REACH.
A recommended EMS and mandatory declarations are a common pairing in electronics supply chains. The declarations are the harder part for a small supplier, because they depend on data from its own suppliers. A system that tracks substances by part number from the start avoids rebuilding the file on every request.
The edition question, and the rest of the base
The agreement names ISO 9001 and AS9100 without an edition. ISO 9001:2026 was published on September 16, 2026. Certificates to the 2015 edition stay valid through the transition, which ends on September 30, 2029, and from March 31, 2028 new certifications are issued only to the 2026 edition. A shop certifying now should choose its edition deliberately.
Electronics is not the whole Chippewa Valley. Plastics products, industrial molds and structural metal together hold close to a quarter of manufacturing jobs in the two counties (BLS QCEW, 2024), and their customers ask for ISO 9001 for their own reasons. Our Minneapolis page covers the larger market to the west, where device makers set the requirements.
How we work with companies here
We work with Eau Claire companies on site and remotely, and we put the on-site days where being in the building changes the outcome: the gap analysis walkthrough, the first internal audit cycle and the certification audits.
The most useful first meeting here is a reading exercise: your purchase order, the Supplier Quality Agreement, the plant provisions it invokes and any customer flow-down above them. That settles which clock applies to change notices, corrective action and records before anyone prices a system.
The consultant who scopes the engagement does the work. No handoff to a junior implementer after the sale.
100% certification success. Every client we have taken to a Stage 2 certification audit has been certified, with no major nonconformities. 100% of surveyed clients would recommend us. Every client who answered our client satisfaction survey said they would recommend Glocal Insight.
ISO standards we help Eau Claire companies with
This page focuses on ISO 9001, and we can help Eau Claire companies with any of the standards below. If you are deciding whether to bring in outside help, start with what an ISO consultant does, how fees work and when certification is worth it.
ISO 9001 in Eau Claire
The Eau Claire metro has 234 manufacturing establishments, 197 of them with fewer than 100 employees (US Census County Business Patterns, 2023), and 131 durable-goods wholesalers (BLS QCEW, 2024 annual averages). ISO 9001 is the most widely held ISO management system certification and the base that AS9100, ISO 13485 and the other sector standards build on.
The focus of this page. ISO 9001 consultants → · Free ISO 9001:2026 gap analysis checklist · Free ISO 9001 internal audit checklist
AS9100 in Eau Claire
The Eau Claire metro's 14 machine shops (BLS QCEW, 2024 annual averages) can supply aerospace programs anywhere. AS9100 adds aerospace requirements to ISO 9001 and arrives through the purchase orders of the aerospace companies a shop supplies; distributors use AS9120.
ISO 17025 in Eau Claire
The Eau Claire metro has 4 testing laboratories (BLS QCEW, 2024 annual averages). ISO/IEC 17025 is the accreditation standard for testing and calibration laboratories, including in-house labs whose results customers or regulators rely on.
ISO 14001 in Eau Claire
The Eau Claire metro has 34 establishments in chemical, plastics and rubber, paper, primary metal, and metal coating and finishing manufacturing (BLS QCEW, 2024 annual averages), the industries where air, water and waste obligations tend to be heaviest. ISO 14001 gives a site one system for its permits, its environmental aspects and its customers' sustainability questionnaires.
ISO 14001 consultants → · Free ISO 14001:2026 gap analysis checklist · Free ISO 14001 internal audit checklist
ISO 45001 in Eau Claire
The Eau Claire metro has 234 manufacturing establishments (US Census County Business Patterns, 2023) and 432 construction establishments (BLS QCEW, 2024 annual averages). ISO 45001 turns a safety program into a management system, with hazard identification, worker participation and incident follow-up that a customer, general contractor or insurer can check.
ISO 27001 in Eau Claire
The Eau Claire metro has 90 computer systems design, software publishing and hosting establishments (BLS QCEW, 2024 annual averages). ISO 27001 is the internationally recognized certification for an information security management system, and a common answer to enterprise customers' security questionnaires.
ISO 27001 consultants → · Free ISO 27001 internal audit checklist · ISO 27001 audit days calculator
ISO 42001 in Eau Claire
The Eau Claire metro has 44 software publishers and custom programming firms (BLS QCEW, 2024 annual averages). ISO/IEC 42001 is the management system standard for organizations that develop or use AI, and it fits alongside an existing ISO 27001 system. See which state AI laws reference it.
ISO 13485 in Eau Claire
The Eau Claire metro has 6 medical equipment and electromedical device manufacturing establishments (BLS QCEW, 2024 annual averages). ISO 13485 is the quality management standard for medical devices, and since February 2, 2026 the FDA's Quality Management System Regulation incorporates it by reference.
ISO 13485 consultants → · Free ISO 13485 internal audit checklist · ISO 13485 audit days calculator
What an engagement covers
- Supplier agreement review We map your purchase orders to TTM's Supplier Quality Agreement and plant provisions, and list each obligation with its deadline: notices, containment, corrective action, records.
- ISO 9001 system built for electronics customers Change control with a 12-month lead, first article reports, containment within 48 hours, corrective action plans within two weeks and seven-year records. See ISO 9001.
- AS9100 where it pays Foreign object debris and counterfeit parts prevention built into the system, for suppliers whose customers flow aerospace requirements. See AS9100.
- Calibration and lab route For calibration providers and in-house labs, a path to ISO/IEC 17025 accreditation with a scope that matches the work.
- Substance declarations RoHS and REACH data tracked by part number, with sub-tier supplier evidence, inside an ISO 14001 or ISO 9001 system.
- Gap analysis and roadmap Two to four weeks, fixed scope and price, with a clear go or no-go before real money is committed.
- Internal audit and management review Auditor-grade internal audits and a facilitated management review that produces recorded decisions.
Questions we get from companies in this market
Does TTM require ISO 9001 or AS9100 certification from suppliers?
Its Supplier Quality Agreement says ISO 9001 and AS9100 certified suppliers are recognized as having a valid quality system. That is recognition, not a blanket requirement: a section headed Non-ISO Certified Suppliers lists the controls a supplier without either certificate must have instead, from configuration control and internal audits to first article inspection, corrective action and calibration. Check the purchase order and the plant's quality assurance provisions for anything stricter.
How much notice does TTM want before we change a process?
For key suppliers, written notice at least 12 months in advance, followed by formal TTM approval, for changes to materials or processes that may affect form, fit, function, reliability, performance, regulatory compliance or safety. Changes of manufacturing location, equipment, raw material suppliers, test methods and subcontracted services are on the list.
What does TTM accept from a calibration provider?
Its Supplier Quality Agreement asks calibration subcontractors for a documented calibration program compliant with ANSI NCS Z540-3, with traceability to NIST, or with ISO/IEC 17025 in its latest revision. Accreditation to ISO/IEC 17025 is the recognized way to demonstrate the latter.
What is TTM doing with the Eau Claire building?
TTM bought the 750,000-square-foot former disk drive facility in July 2025 to support future high-volume US production of advanced circuit boards, particularly for data center computing and networking. On its 2026 earnings calls TTM said it will start some production and an innovation center for advanced R&D there, and gave no start date.
How many manufacturers are in the Eau Claire metro?
On the federal metropolitan definition, which is Chippewa and Eau Claire counties, 234 manufacturing establishments, 197 of them with fewer than 100 employees, employing about 11,822 people (US Census County Business Patterns, 2023). Menomonie and the rest of Dunn County are in the wider combined statistical area but not the metro.
Should we choose ISO 9001 or AS9100?
TTM's agreement recognizes either. If your customers flow down foreign object debris or counterfeit parts controls, AS9100 already contains them and is usually the better buy. If they do not, ISO 9001 is simpler and cheaper to keep. Our ISO 9001 cost guide and AS9100 cost guide cover what each path costs.