Winnipeg, Manitoba
ISO consultants for Winnipeg's aerospace and manufacturing suppliers.
Winnipeg's aerospace base both builds parts and repairs them, and the two answer to different standards. Knowing which side of that line your work sits on is the first decision.
ISO certification consulting in Winnipeg at a glance
- Who we are
- Glocal Insight: senior ISO management system consultants working with Winnipeg companies on site and remotely. The consultant who scopes the work does the work.
- Standards
- ISO 9001, AS9100, ISO 14001, ISO 45001, ISO 27001, ISO 42001, ISO 13485, ISO 17025, plus internal audits, auditor training and ISO certification maintenance.
- Typical timeline
- For ISO 9001 at a company of 10 to 100 people, about three to four months from kickoff to the Stage 2 audit. Week by week.
- Cost
- A standalone gap analysis is typically in the low five figures; full implementation depends on scope. Certification body fees are separate. How certification costs are set, or estimate your audit days.
- Track record
- 100% certification success. 100% of surveyed clients would recommend us.
- Contact
- (816) 535-0738 or start a conversation.
Building parts and repairing them are different standards
Winnipeg's aerospace industry is really two industries. One builds aircraft parts. The other maintains and repairs them. They answer to different quality standards, and a supplier that confuses the two can end up building the wrong system.
On the building side is Boeing Winnipeg, which produces more than 500 end-item composite parts and assemblies for Boeing Commercial Airplanes, including wing-to-body fairings, engine strut fairings and landing gear doors, and is a Tier I partner on the 787 Dreamliner. Boeing describes it as the largest aerospace composite manufacturer in Canada, with about 1,500 employees. Magellan Aerospace runs an advanced composites plant in Winnipeg, and Economic Development Winnipeg says it produces horizontal tails for the global F-35 program.
On the maintenance side is StandardAero, which Economic Development Winnipeg describes as the world's largest independent maintenance, repair and overhaul firm, with its largest operation in Winnipeg. It lists eight Winnipeg sites: Plants 2 through 7 on Sargent Avenue, Ferry Road and Flight Road, a maintenance site on Allen Dyne Road and a turbine test site on Sargent Avenue. Its business units include commercial engine services and component repair.
Both standards start from ISO 9001. AS9100 adds the aviation, space and defense requirements that apply to making parts, and it is the standard this page is about. AS9110 is the version written for maintenance organizations, adding civil and military maintenance and continuing airworthiness requirements, and it is specialist work outside our scope. Knowing which side of that line your work sits on is the first decision for a Winnipeg aerospace supplier.
Industry in Winnipeg
- Boeing Winnipeg More than 500 end-item composite parts and assemblies for Boeing Commercial Airplanes; Tier I partner on the 787; about 1,500 employees
- StandardAero Eight Winnipeg sites on Sargent Avenue, Ferry Road, Flight Road and Allen Dyne Road, including a turbine test site
- Magellan Aerospace Advanced composites plant on Berry Street; produces horizontal tails for the F-35 program, per Economic Development Winnipeg
- New Flyer (NFI Group) Opened a facility in March 2026 to build heavy-duty transit buses, including zero-emission buses, start to finish in Winnipeg
- MacDon Draper headers and self-propelled windrowers, with headquarters and manufacturing in Winnipeg
- Price Industries Commercial air distribution products, headquartered in northeast Winnipeg
Which side of the line a supplier is on
The test is what you deliver. If you machine, form, bond, finish or assemble parts that go into an aircraft or an engine, you are making aerospace product, and AS9100 is the aerospace quality standard written for that work. If you repair, overhaul or service parts that have already flown, you are in the maintenance world, and the requirements are different.
Some Winnipeg shops do both: new detail parts for a manufacturer and repairs for a maintenance customer. For them the question is one of scope. An AS9100 certificate can cover the manufacturing work, and the repair work is a separate conversation with the maintenance customer about what it requires.
Neither Boeing Winnipeg's page nor StandardAero's Winnipeg page publishes supplier quality requirements. The requirement that binds you is the one on your purchase order and in the customer's supplier quality terms, so read those before choosing a standard.
What AS9100 adds to ISO 9001
AS9100 contains all of ISO 9001 and adds aerospace requirements on top. The additions include configuration management, product safety, prevention of counterfeit parts, first article inspection, validation and control of special processes, prevention of foreign objects, and further requirements for controlling the suppliers you use yourself.
For a supplier to a composite parts manufacturer, special processes deserve the closest attention: cure cycles, bonding, non-destructive inspection, and the records that prove each was done to specification. A system that captures those records as part of production, rather than as paperwork afterward, is far easier to defend at audit.
The next revision of the standard will carry a new name, IA9100. We track its status from primary sources on our IA9100 tracker. A system built well to the current revision, AS9100D, is the foundation the next one will build on.
A metro of large plants and the small shops around them
The Winnipeg census metropolitan area has 857 manufacturing businesses with employees, 786 of them with 1 to 99 employees (Statistics Canada, Canadian Business Counts, June 2026). Statistics Canada counts business locations, so read these as locations rather than headcounts.
The striking number is at the top: 12 manufacturing businesses with 500 or more employees. In the same Statistics Canada series, that is more than Calgary (10), Edmonton (9) or Vancouver (9), although Calgary and Edmonton each have about twice Winnipeg's total manufacturing base and Vancouver nearly five times. Winnipeg is a metro of large plants with a deep base of small manufacturers.
The metro covers Winnipeg, Headingley, Rosser, Macdonald, Ritchot, Taché, Springfield, Niverville, St. François Xavier, East St. Paul, West St. Paul, St. Clements and Brokenhead 4. Selkirk and Steinbach are outside it.
Not every large manufacturer here is in aerospace. New Flyer, part of NFI Group, opened a facility in March 2026 for full domestic production of heavy-duty transit buses, including zero-emission buses; NFI says it is the first time in 15 years that buses will be built start to finish in Winnipeg. MacDon makes draper headers and self-propelled windrowers, with its headquarters and manufacturing in Winnipeg. Price Industries, headquartered in northeast Winnipeg, makes commercial air distribution products.
Economic Development Winnipeg counts 32 aerospace companies in Winnipeg and describes Manitoba's aerospace sector as the third largest in Canada. AS9100 is an aerospace standard. For suppliers to the bus, farm equipment and air distribution plants, and for general manufacturing suppliers, ISO 9001 is the base credential, and ISO 14001 and ISO 45001 can share the same management system when a customer or a corporate parent asks for them.
How we work with companies here
We work with Winnipeg companies on site and remotely, from the first gap analysis to the day the certificate arrives.
The first session for an aerospace supplier is a reading of your purchase orders and your customer's supplier quality terms. That settles which standard applies, what the certificate's scope should be, and which special processes need the closest attention.
AS9100 certification is issued by the accredited certification body you choose. We prepare you for that audit; the certification body performs it.
The consultant who scopes the engagement does the work. No handoff to a junior implementer after the sale.
100% certification success. Every client we have taken to a Stage 2 certification audit has been certified, with no major nonconformities. 100% of surveyed clients would recommend us. Every client who answered our client satisfaction survey said they would recommend Glocal Insight.
ISO standards we help Winnipeg companies with
This page focuses on AS9100, and we can help Winnipeg companies with any of the standards below. If you are deciding whether to bring in outside help, start with what an ISO consultant does, how fees work and when certification is worth it. For the national picture, see ISO certification in Canada.
AS9100 in Winnipeg
The Winnipeg census metropolitan area has 8 aerospace product and parts businesses and 27 machine shops and turned-product makers (Statistics Canada, Canadian Business Counts, June 2026). AS9100 adds aerospace requirements to ISO 9001, and it reaches machine shops and processors through the purchase orders of the aerospace companies they supply; distributors use AS9120.
The focus of this page. AS9100 consultants → · Free AS9100 internal audit checklist
ISO 9001 in Winnipeg
The Winnipeg census metropolitan area has 857 manufacturing businesses with employees, 786 of them with fewer than 100 employees, and 1,137 wholesale businesses (Statistics Canada, Canadian Business Counts, June 2026). ISO 9001 is the most widely held ISO management system certification and the base that AS9100, ISO 13485 and the other sector standards build on.
ISO 9001 consultants → · Free ISO 9001:2026 gap analysis checklist · Free ISO 9001 internal audit checklist
ISO 14001 in Winnipeg
The Winnipeg census metropolitan area has 122 businesses in chemical, plastics and rubber, paper, primary metal, and metal coating and finishing manufacturing (Statistics Canada, Canadian Business Counts, June 2026), the industries where air, water and waste obligations tend to be heaviest. ISO 14001 gives a site one system for its permits, its environmental aspects and its customers' sustainability questionnaires.
ISO 14001 consultants → · Free ISO 14001:2026 gap analysis checklist · Free ISO 14001 internal audit checklist
ISO 45001 in Winnipeg
The Winnipeg census metropolitan area has 857 manufacturing businesses with employees and 2,754 construction businesses (Statistics Canada, Canadian Business Counts, June 2026). ISO 45001 turns a safety program into a management system, with hazard identification, worker participation and incident follow-up that a customer, general contractor or insurer can check.
ISO 27001 in Winnipeg
The Winnipeg census metropolitan area has 445 computer systems design, software publishing and hosting businesses (Statistics Canada, Canadian Business Counts, June 2026). ISO 27001 is the internationally recognized certification for an information security management system, and a common answer to enterprise customers' security questionnaires.
ISO 27001 consultants → · Free ISO 27001 internal audit checklist · ISO 27001 audit days calculator
ISO 42001 in Winnipeg
The Winnipeg census metropolitan area has 18 software publishers (Statistics Canada, Canadian Business Counts, June 2026). ISO/IEC 42001 is the management system standard for organizations that develop or use AI, and it fits alongside an existing ISO 27001 system.
ISO 13485 in Winnipeg
The Winnipeg census metropolitan area has 32 medical equipment and supplies manufacturers (Statistics Canada, Canadian Business Counts, June 2026). ISO 13485 is the quality management standard for medical devices, and Health Canada requires an ISO 13485 certificate issued under the Medical Device Single Audit Program for Class II, III and IV medical device licenses.
ISO 13485 consultants → · Free ISO 13485 internal audit checklist · ISO 13485 audit days calculator
ISO 17025 in Winnipeg
ISO/IEC 17025 is the accreditation standard for testing and calibration laboratories, including in-house labs whose results customers or regulators rely on.
What an engagement covers
- Customer requirement review Your purchase orders and supplier quality terms read to establish which standard you are held to and what the certificate should cover.
- AS9100 system build A quality management system with aerospace requirements built in: configuration management, first article inspection, special processes, counterfeit parts and foreign object prevention. See AS9100.
- Special process records Cure, bonding, inspection and other process records captured as part of production, so the evidence exists when an auditor asks.
- ISO 9001 for general manufacturing The base quality credential for suppliers outside aerospace. See ISO 9001.
- Gap analysis and roadmap Two to four weeks, fixed scope and price, with a clear go or no-go before real money is committed.
- Internal audit and management review Auditor-grade internal audits and a facilitated management review producing recorded decisions.
Questions we get from companies in this market
We supply Winnipeg aerospace companies. Do we need AS9100?
It depends on what you supply and what your purchase order says. If you make parts, AS9100 is the aerospace standard to look at. Maintenance, repair and overhaul is the territory of AS9110, a separate standard written for maintenance organizations and specialist work outside our scope. Neither Boeing Winnipeg's nor StandardAero's Winnipeg page publishes supplier quality requirements, so the binding answer is in your purchase order and your customer's supplier quality terms.
What is the difference between AS9100 and AS9110?
Both include the full ISO 9001 requirements. AS9100 adds aviation, space and defense industry requirements and is the standard for organizations that make aerospace products. AS9110 is written for maintenance organizations and adds civil and military aviation maintenance and continuing airworthiness requirements. A shop that makes new parts and also repairs used ones may need to think about both, and the scope of each certificate should match the work it covers.
Is ISO 9001 enough for an aerospace supplier in Winnipeg?
Sometimes. AS9100 contains all of ISO 9001 and adds aerospace requirements, so ISO 9001 is never a step backward. Whether it is enough is your customer's decision, and it is written in the purchase order and the supplier quality terms. Read those first.
What does Boeing Winnipeg make?
According to Boeing, more than 500 end-item composite parts and assemblies for Boeing Commercial Airplanes, including wing-to-body fairings, engine strut fairings and landing gear doors, as a Tier I partner on the 787 Dreamliner. Boeing describes it as the largest aerospace composite manufacturer in Canada, with about 1,500 employees.
Should we wait for IA9100 before getting AS9100?
No. Certification bodies audit to the current revision, AS9100D, until the next one is published and they are ready to audit to it. A system built well to AS9100D is the foundation the next revision will build on. Our IA9100 tracker follows the revision's status from primary sources.
What will AS9100 certification cost?
Audit days are set from the number of people within your certification scope, then adjusted for complexity and the number of sites, so scope is the biggest lever. Our certification cost breakdown explains how quotes are built so you can check any quote you receive.